上一页
ASTM A1000-2005：STANDARD SPECIFICATION
FOR STEEL WIRE, CARBON AND ALLOY SPECIALTY SPRING QUALITY
ASTM A1001-2001(R06)：STANDARD SPECIFICATION FOR HIGH STRENGTH STEEL CASTINGS
IN HEAVY SECTIONS
ASTM A100-2004：STANDARD SPECIFICATION FOR FERROSILICON
ASTM A1002-1999(R03)：STANDARD SPECIFICATION FOR CASTINGS, NICKEL-ALUMINUM
ORDERED ALLOY
ASTM A1003/A1003M-2005：STANDARD SPECIFICATION FOR STEEL SHEET, CARBON,
METALLIC- AND NONMETALLIC-COATED FOR COLD-FORMED FRAMING MEMBERS
ASTM A1004/A1004M-1999(R04)：STANDARD PRACTICE FOR ESTABLISHING CONFORMANCE
TO THE MINIMUM EXPECTED CORROSION CHARACTERISTICS OF METALLIC, PAINTED-METALLIC,
AND NONMETALLIC-COATED STEEL SHEET INTENDED FOR USE AS COLD FORMED FRAMING
MEMBERS
ASTM A1005/A1005M-2000(R04)：STANDARD SPECIFICATION FOR STEEL LINE PIPE,
BLACK, PLAIN END, LONGITUDINAL AND HELICAL SEAM, DOUBLE SUBMERGED-ARC
WELDED
ASTM A1006/A1006M-2000(R04)：STANDARD SPECIFICATION FOR STEEL LINE PIPE,
BLACK, PLAIN END, LASER BEAM WELDED
ASTM A1007-2002：STANDARD SPECIFICATION FOR CARBON STEEL WIRE FOR WIRE
ROPE
ASTM A1008/A1008M-2006 STANDARD SPECIFICATION FOR STEEL, SHEET, COLD-ROLLED,
CARBON, STRUCTURAL, HIGH-STRENGTH LOW-ALLOY, HIGH-STRENGTH LOW-ALLOY WITH
IMPROVED FORMABILITY, SOLUTION HARDENED, AND BAKE HARDENABLE
ASTM A1009-2005：STANDARD SPECIFICATION FOR SOFT MAGNETIC MNZN FERRITE
CORE MATERIALS FOR HIGH FREQUENCY (10 KHZ-1 MHZ) POWER TRANSFORMER AND
FILTER INDUCTOR APPLICATIONS
ASTM A1010/A1010M-2001(E)：STANDARD SPECIFICATION FOR HIGHER-STRENGTH MARTENSITIC
STAINLESS STEEL PLATE, SHEET, AND STRIP
ASTM A1011/A1011M-2005A：STANDARD SPECIFICATION FOR STEEL, SHEET AND STRIP,
HOT-ROLLED, CARBON, STRUCTURAL, HIGH- STRENGTH LOW-ALLOY AND HIGH-STRENGTH
LOW-ALLOY WITH IMPROVED FORMABILITY
ASTM A101-2004：STANDARD SPECIFICATION FOR FERROCHROMIUM
ASTM A1012-2002：STANDARD SPECIFICATION FOR SEAMLESS AND WELDED FERRITIC,
AUSTENITIC AND DUPLEX ALLOY STEEL CONDENSER AND HEAT EXCHANGER TUBES WITH
INTEGRAL FINS
ASTM A1013-2000(R05)：STANDARD TEST METHOD FOR HIGH-FREQUENCY (10 KHZ-1
MHZ) CORE LOSS OF SOFT MAGNETIC CORE COMPONENTS AT CONTROLLED TEMPERATURES
USING THE VOLTMETER-AMMETER-WATTMETER METHOD
ASTM A1014/A1014M-2006：STANDARD SPECIFICATION FOR PRECIPITATION-HARDENING
BOLTING MATERIAL (UNS N07718) FOR HIGH TEMPERATURE SERVICE
ASTM A1015-2001(R05)：STANDARD GUIDE FOR VIDEOBORESCOPING OF TUBULAR PRODUCTS
FOR SANITARY APPLICATIONS
ASTM A1016/A1016M-2004A：STANDARD SPECIFICATION FOR GENERAL REQUIREMENTS
FOR FERRITIC ALLOY STEEL, AUSTENITIC ALLOY STEEL, AND STAINLESS STEEL
TUBES
ASTM A1017/A1017M-2006：STANDARD SPECIFICATION FOR PRESSURE VESSEL PLATES,
ALLOY STEEL, CHROMIUM-MOLYBDENUM-TUNGSTEN
ASTM A1018/A1018M-2006：STANDARD SPECIFICATION FOR STEEL, SHEET AND STRIP,
HEAVY-THICKNESS COILS, HOT-ROLLED, CARBON, COMMERCIAL, DRAWING, STRUCTURAL,
HIGH-STRENGTH LOW-ALLOY, AND HIGH-STRENGTH LOW-ALLOY WITH IMPROVED FORMABILITY
ASTM A1019/A1019M-2001：STANDARD SPECIFICATION FOR CLOSED RIB STEEL PIPE
WITH DIAMETER OF 36 IN. [900 MM] OR LESS, POLYMER PRECOATED FOR SEWERS
AND DRAINS
ASTM A1020/A1020M-2002：STANDARD SPECIFICATION FOR STEEL TUBES, CARBON
AND CARBON MANGANESE, FUSION WELDED, FOR BOILER, SUPERHEATER, HEAT EXCHANGER
AND CONDENSER APPLICATIONS
ASTM A1021/A1021M-2005：STANDARD SPECIFICATION FOR MARTENSITIC STAINLESS
STEEL FORGINGS AND FORGING STOCK FOR HIGH-TEMPERATURE SERVICE
ASTM A102-2004：STANDARD SPECIFICATION FOR FERROVANADIUM
ASTM A1022-2001：STANDARD SPECIFICATION FOR DEFORMED AND PLAIN STAINLESS
STEEL WIRE AND WELDED WIRE FOR CONCRETE REINFORCEMENT
ASTM A1023/A1023M-2002：STANDARD SPECIFICATION FOR STRANDED CARBON STEEL
WIRE ROPES FOR GENERAL PURPOSES
ASTM A1024/A1024M-2002：STANDARD SPECIFICATION FOR STEEL LINE PIPE, BLACK,
PLAIN-END, SEAMLESS
ASTM A1025-2005：STANDARD SPECIFICATION FOR FERROALLOYS AND OTHER ALLOYING
MATERIALS, GENERAL REQUIREMENTS
ASTM A1026-2003：STANDARD SPECIFICATION FOR ALLOY STEEL STRUCTURAL SHAPES
FOR USE IN BUILDING FRAMING1
ASTM A1028-2003：STANDARD SPECIFICATION FOR STAINLESS STEEL BARS FOR COMPRESSOR
AND TURBINE AIRFOILS
ASTM A1030/A1030M-2005：STANDARD PRACTICE FOR MEASURING FLATNESS CHARACTERISTICS
OF STEEL SHEET PRODUCTS
ASTM A1031-2005：STANDARD SPECIFICATION FOR STEEL, SHEET AND STRIP, HEAVY-THICKNESS
COILS, ALLOY, DRAWING STEEL AND STRUCTURAL STEEL, HOT-ROLLED
ASTM A1032-2004：STANDARD TEST METHOD FOR HYDROGEN EMBRITTLEMENT RESISTANCE
FOR STEEL WIRE HARD DRAWN USED FOR PRESTRESSING CONCRETE PIPE
ASTM A1033-2004：STANDARD PRACTICE FOR QUANTITATIVE MEASUREMENT AND REPORTING
OF HYPOEUTECTOID CARBON AND LOW-ALLOY STEEL PHASE TRANSFORMATIONS
ASTM A1034/A1034M-2005B：STANDARD TEST METHODS FOR TESTING MECHANICAL SPLICES
FOR STEEL REINFORCING BARS
ASTM A1035/A1035M-2006：STANDARD SPECIFICATION FOR DEFORMED AND PLAIN,
LOW-CARBON, CHROMIUM, STEEL BARS FOR CONCRETE REINFORCEMENT
ASTM A1036-2004：STANDARD GUIDE FOR MEASURING POWER FREQUENCY MAGNETIC
PROPERTIES OF FLAT-ROLLED ELECTRICAL STEELS USING SMALL SINGLE SHEET TESTERS
ASTM A1037/A1037M-2005：STANDARD SPECIFICATION FOR STEEL LINE PIPE, BLACK,
FURNACE-BUTT-WELDED
ASTM A1038-2005：STANDARD PRACTICE FOR PORTABLE HARDNESS TESTING BY THE
ULTRASONIC CONTACT IMPEDANCE METHOD
ASTM A1039/A1039M-2004：STANDARD SPECIFICATION FOR STEEL, SHEET, HOT ROLLED,
CARBON, COMMERCIAL AND STRUCTURAL, PRODUCED BY THE TWIN-ROLL CASTING PROCESS
ASTM A1040-2004：STANDARD GUIDE FOR SPECIFYING HARMONIZED STANDARD GRADE
COMPOSITIONS FOR WROUGHT CARBON, LOW-ALLOY, AND ALLOY STEELS
ASTM A1041/A1041M-2004：STANDARD SPECIFICATION FOR PRESSURE VESSEL PLATES,
ALLOY STEEL, HIGHER STRENGTH CHROMIUM-MOLYBDENUM-TUNGSTEN
ASTM A1042/A1042M-2004：STANDARD SPECIFICATION FOR COMPOSITE CORRUGATED
STEEL PIPE FOR SEWERS AND DRAINS
ASTM A1043/A1043M-2005：STANDARD SPECIFICATION FOR STRUCTURAL STEEL WITH
LOW YIELD TO TENSILE RATIO FOR USE IN BUILDINGS
ASTM A1044/A1044M-2005：STANDARD SPECIFICATION FOR STEEL STUD ASSEMBLIES
FOR SHEAR REINFORCEMENT OF CONCRETE
ASTM A1045-2005：STANDARD SPECIFICATION FOR FLEXIBLE POLY (VINYL CHLORIDE)
(PVC) GASKETS USED IN CONNECTION OF WATER CLOSETS TO SANITARY DRAINAGE
SYSTEM
ASTM A1046/A1046M-2006：STANDARD SPECIFICATION FOR STEEL SHEET, ZINC-ALUMINUM-MAGNESIUM
ALLOY-COATED BY THE HOT-DIP PROCESS1
ASTM A1047/A1047M-2005：STANDARD TEST METHOD FOR PNEUMATIC LEAK TESTING
OF TUBING
ASTM A105/A105M-2005 管道部件用碳钢锻件
ASTM A105/A105M-2005：STANDARD SPECIFICATION FOR CARBON STEEL FORGINGS
FOR PIPING APPLICATIONS
ASTM A106/A106M-2006：STANDARD SPECIFICATION FOR SEAMLESS CARBON STEEL
PIPE FOR HIGH-TEMPERATURE SERVICE
ASTM A106-2006 高温用无缝碳钢公称管规范
ASTM A108-2003（R2005）STANDARD SPECIFICATION FOR STEEL BARS, CARBON AND
ALLOY, COLD- FINISHED
ASTM A108-2003版 冷精整的碳钢和合金钢棒材标准技术条件
ASTM A109/A109M-2003：STANDARD SPECIFICATION FOR STEEL, STRIP, CARBON (0.25
MAXIMUM PERCENT), COLD-ROLLED
ASTM A111-1999A(R04)(E)：STANDARD SPECIFICATION FOR ZINC-COATED (GALVANIZED)
G牵IRONG钎 TELEPHONE AND TELEGRAPH LINE WIRE
ASTM A116-2005：STANDARD SPECIFICATION FOR METALLIC-COATED, STEEL-WOVEN
WIRE FENCE FABRIC
ASTM A1-2000(R05)：STANDARD SPECIFICATION FOR CARBON STEEL TEE RAILS
ASTM A121-1999(R04)：STANDARD SPECIFICATION FOR METALLIC-COATED CARBON
STEEL BARBED WIRE
ASTM A123/A123M-2002 钢铁产品镀锌品层(热浸镀)标准规范
ASTM A123/A123M-2002：STANDARD SPECIFICATION FOR ZINC (HOT-DIP GALVANIZED)
COATINGS ON IRON AND STEEL PRODUCTS
ASTM A125-1996(R01)：STANDARD SPECIFICATION FOR STEEL SPRINGS, HELICAL,
HEAT-TREATED
ASTM A126-2004 阀门、法兰和管道附件用灰铁铸件
ASTM A126-2004：STANDARD SPECIFICATION FOR GRAY IRON CASTINGS FOR VALVES,
FLANGES, AND PIPE FITTINGS
ASTM A128/A128M-1993(R03)：STANDARD SPECIFICATION FOR STEEL CASTINGS, AUSTENITIC
MANGANESE
ASTM A131/A131M-2004(E)：STANDARD SPECIFICATION FOR STRUCTURAL STEEL FOR
SHIPS
ASTM A132-2004：STANDARD SPECIFICATION FOR FERROMOLYBDENUM
ASTM A134-1996(R05)：STANDARD SPECIFICATION FOR PIPE, STEEL, ELECTRIC-FUSION
(ARC)-WELDED (SIZES NPS 16 AND OVER)
ASTM A135/A135M-2006：STANDARD SPECIFICATION FOR ELECTRIC-RESISTANCE-WELDED
STEEL PIPE
ASTM A139/A139M-2004：STANDARD SPECIFICATION FOR ELECTRIC-FUSION (ARC)-WELDED
STEEL PIPE (NPS 4 AND OVER)
ASTM A143/A143M-2003：STANDARD PRACTICE FOR SAFEGUARDING AGAINST EMBRITTLEMENT
OF HOT-DIP GALVANIZED STRUCTURAL STEEL PRODUCTS AND PROCEDURE FOR DETECTING
EMBRITTLEMENT
ASTM A143-2003 热侵镀锌结构钢制品防脆化的标准实施规程和催化探测方法
ASTM A144-2004：STANDARD SPECIFICATION FOR FERROTUNGSTEN
ASTM A146-2004：STANDARD SPECIFICATION FOR MOLYBDENUM OXIDE PRODUCTS
ASTM A148/A148M-2005：STANDARD SPECIFICATION FOR STEEL CASTINGS, HIGH STRENGTH,
FOR STRUCTURAL PURPOSES
ASTM A153/A153M-2005 钢铁构件镀锌层(热浸镀)标准规范
ASTM A153/A153M-2005：STANDARD SPECIFICATION FOR ZINC COATING (HOT-DIP)
ON IRON AND STEEL HARDWARE - AASHTO NO.: M232
ASTM A159-1983(R01)：STANDARD SPECIFICATION FOR AUTOMOTIVE GRAY IRON CASTINGS
ASTM A167-1999(R04)：STANDARD SPECIFICATION FOR STAINLESS AND HEAT-RESISTING
CHROMIUM-NICKEL STEEL PLATE, SHEET, AND STRIP
ASTM A176-1999(R04)：STANDARD SPECIFICATION FOR STAINLESS AND HEAT-RESISTING
CHROMIUM STEEL PLATE, SHEET, AND STRIP
ASTM A178/A178M-2002：STANDARD SPECIFICATION FOR ELECTRIC-RESISTANCE-WELDED
CARBON STEEL AND CARBON-MANGANESE STEEL BOILER AND SUPERHEATER TUBES
ASTM A179/A179M-1990A(R05)：STANDARD SPECIFICATION FOR SEAMLESS COLD-DRAWN
LOW-CARBON STEEL HEAT-EXCHANGER AND CONDENSER TUBES
ASTM A179/A179M-1990a（R2001） 热交换器和冷凝器用无缝冷拉低碳钢管标准规范
ASTM A181/A181M-2001 通用管路用碳钢锻件标准规范
ASTM A181/A181M-2001：STANDARD SPECIFICATION FOR CARBON STEEL FORGINGS,
FOR GENERAL-PURPOSE PIPING
ASTM A182/A182M-2002 高温用锻制或轧制合金钢法兰、锻制管件、阀门和部件
ASTM A182/A182M-2005A：STANDARD SPECIFICATION FOR FORGED OR ROLLED ALLOY
AND STAINLESS STEEL PIPE FLANGES, FORGED FITTINGS, AND VALVES AND PARTS
FOR HIGH-TEMPERATURE SERVICE
ASTM A183-2003：STANDARD SPECIFICATION FOR CARBON STEEL TRACK BOLTS AND
NUTS
ASTM A184/A184M-2006：STANDARD SPECIFICATION FOR WELDED DEFORMED STEEL
BAR MATS FOR CONCRETE REINFORCEMENT
ASTM A185/A185M-2006：STANDARD SPECIFICATION FOR STEEL WELDED WIRE REINFORCEMENT,
PLAIN, FOR CONCRETE
ASTM A192/A192M-2002：STANDARD SPECIFICATION FOR SEAMLESS CARBON STEEL
BOILER TUBES FOR HIGH-PRESSURE SERVICE
ASTM A192-2002 高压设备用无缝碳钢锅炉管标准规范
ASTM A193/A193M-2006 高温用合金钢和不锈钢螺栓材料
ASTM A193/A193M-2006A：STANDARD SPECIFICATION FOR ALLOY-STEEL AND STAINLESS
STEEL BOLTING MATERIALS FOR HIGH TEMPERATURE OR HIGH PRESSURE SERVICE
AND OTHER SPECIAL PURPOSE APPLICATIONS
ASTM A194/A194M-2006 高温用合金钢和不锈钢螺栓材料
ASTM A194/A194M-2006：STANDARD SPECIFICATION FOR CARBON AND ALLOY STEEL
NUTS FOR BOLTS FOR HIGH PRESSURE OR HIGH TEMPERATURE SERVICE, OR BOTH
ASTM A197/A197M-2000(R06)：STANDARD SPECIFICATION FOR CUPOLA MALLEABLE
IRON
ASTM A20/A20M-2005：STANDARD SPECIFICATION FOR GENERAL REQUIREMENTS FOR
STEEL PLATES FOR PRESSURE VESSELS
ASTM A203/A203M-1997(R03)：STANDARD SPECIFICATION FOR PRESSURE VESSEL PLATES,
ALLOY STEEL, NICKEL
ASTM A204/A204M-2003：STANDARD SPECIFICATION FOR PRESSURE VESSEL PLATES,
ALLOY STEEL, MOLYBDENUM
ASTM A209/A209M-2003 锅炉和过热器用无缝碳钼合金钢管标准规范
ASTM A209/A209M-2003：STANDARD SPECIFICATION FOR SEAMLESS CARBON-MOLYBDENUM
ALLOY-STEEL BOILER AND SUPERHEATER TUBES
ASTM A210/A210M-2002：STANDARD SPECIFICATION FOR SEAMLESS MEDIUM-CARBON
STEEL BOILER AND SUPERHEATER TUBES
ASTM A210/A210M-2003 锅炉和过热器用无缝中碳钢管技术条件
ASTM A213/A213M-2006：STANDARD SPECIFICATION FOR SEAMLESS FERRITIC AND
AUSTENITIC ALLOY-STEEL BOILER, SUPERHEATER, AND HEAT-EXCHANGER TUBES
ASTM A213/A213Mb-2004 锅炉过热器和换热器用无缝铁素体和奥氏体合金钢传热管技术条件
ASTM A214/A214M-1996(R05)：STANDARD SPECIFICATION FOR ELECTRIC-RESISTANCE-WELDED
CARBON STEEL HEAT-EXCHANGER AND CONDENSER TUBES
ASTM A216/A216M-2004 高温用可熔焊碳钢铸件标准规范
ASTM A216/A216M-2004：STANDARD SPECIFICATION FOR STEEL CASTINGS, CARBON,
SUITABLE FOR FUSION WELDING, FOR HIGH-TEMPERATURE SERVICE
ASTM A217/A217M-2002 高温承压件用马氏体不锈钢和合金钢铸件标准规范
ASTM A217/A217M-2004：STANDARD SPECIFICATION FOR STEEL CASTINGS, MARTENSITIC
STAINLESS AND ALLOY, FOR PRESSURE-CONTAINING PARTS, SUITABLE FOR HIGH-TEMPERATURE
SERVICE
ASTM A220/A220M-1999(R04)：STANDARD SPECIFICATION FOR PEARLITIC MALLEABLE
IRON
ASTM A2-2002：STANDARD SPECIFICATION FOR CARBON STEEL GIRDER RAILS OF PLAIN,
GROOVED, AND GUARD TYPES
ASTM A225/A225M-2003：STANDARD SPECIFICATION FOR PRESSURE VESSEL PLATES,
ALLOY STEEL, MANGANESE-VANADIUM-NICKEL
ASTM A227/A227M-2006：STANDARD SPECIFICATION FOR STEEL WIRE, COLD-DRAWN
FOR MECHANICAL SPRINGS
ASTM A228/A228M-2002：STANDARD SPECIFICATION FOR STEEL WIRE, MUSIC SPRING
QUALITY
ASTM A229/A229M-1999(R05)：STANDARD SPECIFICATION FOR STEEL WIRE, OIL-TEMPERED
FOR MECHANICAL SPRINGS
ASTM A230/A230M-2005：STANDARD SPECIFICATION FOR STEEL WIRE, OIL-TEMPERED
CARBON VALVE SPRING QUALITY
ASTM A231/A231M-2004：STANDARD SPECIFICATION FOR CHROMIUM-VANADIUM ALLOY
STEEL SPRING WIRE
ASTM A232/A232M-2005：STANDARD SPECIFICATION FOR CHROMIUM-VANADIUM ALLOY
STEEL VALVE SPRING QUALITY WIRE
ASTM A234/A234M-2004 中、高温用锻制碳钢和合金钢管道配件
ASTM A234/A234M-2006 STANDARD SPECIFICATION FOR PIPING FITTINGS OF WROUGHT
CARBON STEEL AND ALLOY STEEL FOR MODERATE AND HIGH TEMPERATURE SERVICE
ASTM A239-1995(R04)：STANDARD PRACTICE FOR LOCATING THE THINNEST SPOT IN
A ZINC (GALVANIZED) COATING ON IRON OR STEEL ARTICLES
ASTM A240/A240M-2005:压力容器用耐热铬及铬－镍不锈钢钢板、薄板和钢带标准技术条件
ASTM A240/A240M-2006：STANDARD SPECIFICATION FOR CHROMIUM AND CHROMIUM-NICKEL
STAINLESS STEEL PLATE, SHEET, AND STRIP FOR PRESSURE VESSELS AND FOR GENERAL
APPLICATIONS
ASTM A242/A242M-2004(E)：STANDARD SPECIFICATION FOR HIGH-STRENGTH LOW-ALLOY
STRUCTURAL STEEL - AASHTO NO.: M 161
ASTM A247-1967(R98)(E)：STANDARD TEST METHOD FOR EVALUATING THE MICROSTRUCTURE
OF GRAPHITE IN IRON CASTINGS
ASTM A249/A249M-2004A：STANDARD SPECIFICATION FOR WELDED AUSTENITIC STEEL
BOILER, SUPERHEATER, HEAT-EXCHANGER, AND CONDENSER TUBES
ASTM A250/A250M-2005：STANDARD SPECIFICATION FOR ELECTRIC-RESISTANCE-WELDED
FERRITIC ALLOY-STEEL BOILER AND SUPERHEATER TUBES
ASTM A252-1998(R02)：STANDARD SPECIFICATION FOR WELDED AND SEAMLESS STEEL
PIPE PILES
ASTM A252-98（R2002） 焊接钢和无缝钢管桩的标准规范
ASTM A254-1997(R02)：STANDARD SPECIFICATION FOR COPPER-BRAZED STEEL TUBING
ASTM A255-2002(E)：STANDARD TEST METHODS FOR DETERMINING HARDENABILITY
OF STEEL
ASTM A262-2002(R2005) STANDARD PRACTICES FOR DETECTING SUSCEPTIBILITY
TO INTERGRANULAR ATTACK IN AUSTENITIC STAINLESS STEELS
ASTM A262-2002a 探测奥氏体不锈钢晶间腐蚀敏感度的标准实施规范
ASTM A263-2003：STANDARD SPECIFICATION FOR STAINLESS CHROMIUM STEEL-CLAD
PLATE
ASTM A264-2003：STANDARD SPECIFICATION FOR STAINLESS CHROMIUM-NICKEL STEEL-CLAD
PLATE
ASTM A265-2003：STANDARD SPECIFICATION FOR NICKEL AND NICKEL-BASE ALLOY-CLAD
STEEL PLATE
ASTM A266/A266M-2003A：STANDARD SPECIFICATION FOR CARBON STEEL FORGINGS
FOR PRESSURE VESSEL COMPONENTS
ASTM A268/A268M-2005A：STANDARD SPECIFICATION FOR SEAMLESS AND WELDED FERRITIC
AND MARTENSITIC STAINLESS STEEL TUBING FOR GENERAL SERVICE
ASTM A269/A269-2004 通用无缝和焊接奥氏体不锈钢管标准规范
ASTM A269-2004：STANDARD SPECIFICATION FOR SEAMLESS AND WELDED AUSTENITIC
STAINLESS STEEL TUBING FOR GENERAL SERVICE
ASTM A27/A27M-2005：STANDARD SPECIFICATION FOR STEEL CASTINGS, CARBON,
FOR GENERAL APPLICATION
ASTM A270-2003A：STANDARD SPECIFICATION FOR SEAMLESS AND WELDED AUSTENITIC
AND FERRITIC/AUSTENITIC STAINLESS STEEL SANITARY TUBING
ASTM A275/A275M-1998(R03)：STANDARD TEST METHOD FOR MAGNETIC PARTICLE EXAMINATION
OF STEEL FORGINGS
ASTM A276-2006 不锈钢棒材和型材
ASTM A276-2006：STANDARD SPECIFICATION FOR STAINLESS STEEL BARS AND SHAPES
ASTM A278/A278M-2001 高温不超过650°F（350℃）的承压部件用灰铸铁件
ASTM A278/A278M-2001：STANDARD SPECIFICATION FOR GRAY IRON CASTINGS FOR
PRESSURE-CONTAINING PARTS FOR TEMPERATURES UP TO 650 DEGREES F (350 DEGREES
C)
ASTM A283/A283M-2003：STANDARD SPECIFICATION FOR LOW AND INTERMEDIATE TENSILE
STRENGTH CARBON STEEL PLATES
ASTM A285/A285M-2003：STANDARD SPECIFICATION FOR PRESSURE VESSEL PLATES,
CARBON STEEL, LOW- AND INTERMEDIATE-TENSILE STRENGTH
ASTM A288-1991(R03)：STANDARD SPECIFICATION FOR CARBON AND ALLOY STEEL
FORGINGS FOR MAGNETIC RETAINING RINGS FOR TURBINE GENERATORS
ASTM A289/A289M-1997(R03)：STANDARD SPECIFICATION FOR ALLOY STEEL FORGINGS
FOR NONMAGNETIC RETAINING RINGS FOR GENERATORS
ASTM A29/A29M-2005 热锻碳素钢和合金钢棒材一般要求标准规范
ASTM A29/A29M-2005：STANDARD SPECIFICATION FOR STEEL BARS, CARBON AND ALLOY,
HOT-WROUGHT, GENERAL REQUIREMENTS FOR
ASTM A290/A290M-2005：STANDARD SPECIFICATION FOR CARBON AND ALLOY STEEL
FORGINGS FOR RINGS FOR REDUCTION GEARS
ASTM A291/A291M-2005：STANDARD SPECIFICATION FOR STEEL FORGINGS, CARBON
AND ALLOY, FOR PINIONS, GEARS AND SHAFTS FOR REDUCTION GEARS
ASTM A295/A295M-2005：STANDARD SPECIFICATION FOR HIGH-CARBON ANTI-FRICTION
BEARING STEEL
ASTM A297/A297M-1997(R03)：STANDARD SPECIFICATION FOR STEEL CASTINGS, IRON-CHROMIUM
AND IRON-CHROMIUM-NICKEL, HEAT RESISTANT, FOR GENERAL APPLICATION
ASTM A299/A299M-2004：STANDARD SPECIFICATION FOR PRESSURE VESSEL PLATES,
CARBON STEEL, MANGANESE-SILICON
ASTM A302/A302M-2003：STANDARD SPECIFICATION FOR PRESSURE VESSEL PLATES,
ALLOY STEEL, MANGANESE-MOLYBDENUM AND MANGANESE-MOLYBDENUM-NICKEL
ASTM A304-2005(E)：STANDARD SPECIFICATION FOR CARBON AND ALLOY STEEL BARS
SUBJECT TO END-QUENCH HARDENABILITY REQUIREMENTS
ASTM A307/A307M-2004 抗拉强度6000PSI碳钢螺栓和螺柱标准技术条件
ASTM A307-2004：STANDARD SPECIFICATION FOR CARBON STEEL BOLTS AND STUDS,
60 000 PSI TENSILE STRENGTH
ASTM A308/A308M-2003：STANDARD SPECIFICATION FOR STEEL SHEET, TERNE (LEAD-TIN
ALLOY) COATED BY THE HOT-DIP PROCESS
ASTM A309-2001：STANDARD TEST METHOD FOR WEIGHT AND COMPOSITION OF COATING
ON TERNE SHEET BY THE TRIPLE-SPOT TEST
ASTM A311/A311M-2004：STANDARD SPECIFICATION FOR COLD-DRAWN, STRESS-RELIEVED
CARBON STEEL BARS SUBJECT TO MECHANICAL PROPERTY REQUIREMENTS
ASTM A312/A312M-2005 无缝和焊接的以及重度冷加工奥氏体不锈钢公称管标准技术条件
ASTM A312/A312M-2006 STANDARD SPECIFICATION FOR SEAMLESS, WELDED, AND
HEAVILY COLD WORKED AUSTENITIC STAINLESS STEEL PIPES
ASTM A31-2004：STANDARD SPECIFICATION FOR STEEL RIVETS AND BARS FOR RIVETS,
PRESSURE VESSELS
ASTM A313/A313M-2003：STANDARD SPECIFICATION FOR STAINLESS STEEL SPRING
WIRE
ASTM A314-1997(R02)：STANDARD SPECIFICATION FOR STAINLESS STEEL BILLETS
AND BARS FOR FORGING
ASTM A319-1971(R01)：STANDARD SPECIFICATION FOR GRAY IRON CASTINGS FOR
ELEVATED TEMPERATURES FOR NON-PRESSURE CONTAINING PARTS
ASTM A320/A320M-2005 低温用合金钢栓接材料
ASTM A320/A320M-2005A：STANDARD SPECIFICATION FOR ALLOY-STEEL AND STAINLESS
STEEL BOLTING MATERIALS FOR LOW-TEMPERATURE SERVICE
ASTM A3-2001(R06)：STANDARD SPECIFICATION FOR STEEL JOINT BARS, LOW, MEDIUM,
AND HIGH CARBON (NON-HEAT-TREATED)
ASTM A321-1990(R01)：STANDARD SPECIFICATION FOR STEEL BARS, CARBON, QUENCHED
AND TEMPERED
ASTM A322-1991(R01)(E)：STANDARD SPECIFICATION FOR STEEL BARS, ALLOY, STANDARD
GRADES
ASTM A323-2005：STANDARD SPECIFICATION FOR FERROBORON
ASTM A324-1973(R04)：STANDARD SPECIFICATION FOR FERROTITANIUM
ASTM A325-2004B：STANDARD SPECIFICATION FOR STRUCTURAL BOLTS, STEEL, HEAT
TREATED, 120/105 KSI MINIMUM TENSILE STRENGTH - AASHTO NO.: M 164
ASTM A325M-2005：STANDARD SPECIFICATION FOR STRUCTURAL BOLTS, STEEL, HEAT
TREATED 830 MPA MINIMUM TENSILE STRENGTH [METRIC]
ASTM A327-1991(R06)：STANDARD METHODS OF IMPACT TESTING OF CAST IRONS
ASTM A327M-1991(R06)：STANDARD TEST METHODS FOR IMPACT TESTING OF CAST
IRONS (METRIC)
ASTM A328/A328M-2005：STANDARD SPECIFICATION FOR STEEL SHEET PILING - AASHTO
NO.: M 202
ASTM A333/A333M-2004 低温设备用无缝和焊接钢管的规范标准
ASTM A333/A333M-2005：STANDARD SPECIFICATION FOR SEAMLESS AND WELDED STEEL
PIPE FOR LOW-TEMPERATURE SERVICE
ASTM A334/A334M-2004 低温设备用无缝和焊接碳素和合金钢管的标准规范
ASTM A334/A334M-2004A：STANDARD SPECIFICATION FOR SEAMLESS AND WELDED CARBON
AND ALLOY-STEEL TUBES FOR LOW-TEMPERATURE SERVICE
ASTM A335/A335M-2006 STANDARD SPECIFICATION FOR SEAMLESS FERRITIC ALLOY-STEEL
PIPE FOR HIGH-TEMPERATURE SERVICE
ASTM A335-2003 高温设备用无缝铁素体合金钢管标准规范
ASTM A336/A336M-2006：STANDARD SPECIFICATION FOR ALLOY STEEL FORGINGS FOR
PRESSURE AND HIGH-TEMPERATURE PARTS
ASTM A338-1984(R04)：STANDARD SPECIFICATION FOR MALLEABLE IRON FLANGES,
PIPE FITTINGS, AND VALVE PARTS FOR RAILROAD, MARINE, AND OTHER HEAVY DUTY
SERVICE AT TEMPERATURES UP TO 650 DEGREES F (345 DEGREES C)
ASTM A34/A34M-2001：STANDARD PRACTICE FOR SAMPLING AND PROCUREMENT TESTING
OF MAGNETIC MATERIALS
ASTM A340-2003A：STANDARD TERMINOLOGY OF SYMBOLS AND DEFINITIONS RELATING
TO MAGNETIC TESTING
ASTM A341/A341M-2000(R05)：STANDARD TEST METHOD FOR DIRECT CURRENT MAGNETIC
PROPERTIES OF MATERIALS USING D-C PERMEAMETERS AND THE BALLISTIC TEST
METHODS
ASTM A342/A342M-2004：STANDARD TEST METHODS FOR PERMEABILITY OF FEEBLY
MAGNETIC MATERIALS
ASTM A343/A343M-2003：STANDARD TEST METHOD FOR ALTERNATING-CURRENT MAGNETIC
PROPERTIES OF MATERIALS AT POWER FREQUENCIES USING WATTMETER-AMMETER-VOLTMETER
METHOD AND 25-CM EPSTEIN TEST FRAME
ASTM A345-2004：STANDARD SPECIFICATION FOR FLAT-ROLLED ELECTRICAL STEELS
FOR MAGNETIC APPLICATIONS
ASTM A348/A348M-2005：STANDARD TEST METHOD FOR ALTERNATING CURRENT MAGNETIC
PROPERTIES OF MATERIALS USING THE WATTMETER-AMMETER-VOLTMETER METHOD,
100 TO 10 000 HZ AND 25-CM EPSTEIN FRAME
ASTM A350/A350M-2004a 要求冲击韧性试验的管件用碳钢及低合金钢锻件标准规范
ASTM A350/A350M-2004A：STANDARD SPECIFICATION FOR CARBON AND LOW-ALLOY
STEEL FORGINGS, REQUIRING NOTCH TOUGHNESS TESTING FOR PIPING COMPONENTS
ASTM A351/A351M-2006 承压件用奥氏体、奥氏体-铁素体（双相）钢铸件规范
ASTM A351/A351M-2006：STANDARD SPECIFICATION FOR CASTINGS, AUSTENITIC,
FOR PRESSURE-CONTAINING PARTS
ASTM A352/A352M-2006 低温承压用铁素体和马氏体铸钢件标准规范
ASTM A352/A352M-2006：STANDARD SPECIFICATION FOR STEEL CASTINGS, FERRITIC
AND MARTENSITIC, FOR PRESSURE-CONTAINING PARTS, SUITABLE FOR LOW-TEMPERATURE
SERVICE
ASTM A353/A353M-2004：STANDARD SPECIFICATION FOR PRESSURE VESSEL PLATES,
ALLOY STEEL, 9 PERCENT NICKEL, DOUBLE-NORMALIZED AND TEMPERED
ASTM A354-2004：STANDARD SPECIFICATION FOR QUENCHED AND TEMPERED ALLOY
STEEL BOLTS, STUDS, AND OTHER EXTERNALLY THREADED FASTENERS
ASTM A355-1989(R06)：STANDARD SPECIFICATION FOR STEEL BARS, ALLOYS, FOR
NITRIDING
ASTM A356/A356M-2005：STANDARD SPECIFICATION FOR STEEL CASTINGS, CARBON,
LOW ALLOY, AND STAINLESS STEEL, HEAVY-WALLED FOR STEAM TURBINES
ASTM A358/A358M-2005：STANDARD SPECIFICATION FOR ELECTRIC-FUSION-WELDED
AUSTENITIC CHROMIUM-NICKEL STAINLESS STEEL PIPE FOR HIGH-TEMPERATURE SERVICE
AND GENERAL APPLICATIONS
ASTM A36/A36M-2005 碳结构钢标准规范（中文版）
ASTM A36/A36M-2005：STANDARD SPECIFICATION FOR CARBON STRUCTURAL STEEL
ASTM A363-2003：STANDARD SPECIFICATION FOR ZINC-COATED (GALVANIZED) STEEL
OVERHEAD GROUND WIRE STRAND
ASTM A367-1960(R05)：STANDARD TEST METHODS OF CHILL TESTING OF CAST IRON
ASTM A368-1995A(R04)：STANDARD SPECIFICATION FOR STAINLESS STEEL WIRE STRAND
ASTM A369/A369M-2002：STANDARD SPECIFICATION FOR CARBON AND FERRITIC ALLOY
STEEL FORGED AND BORED PIPE FOR HIGH-TEMPERATURE SERVICE
ASTM A370-2005 钢制品力学性能试验方法和定义标准
ASTM A370-2005：STANDARD TEST METHODS AND DEFINITIONS FOR MECHANICAL TESTING
OF STEEL PRODUCTS
ASTM A372/A372M-2003：STANDARD SPECIFICATION FOR CARBON AND ALLOY STEEL
FORGINGS FOR THIN-WALLED PRESSURE VESSELS
ASTM A376/A376M-2006：STANDARD SPECIFICATION FOR SEAMLESS AUSTENITIC STEEL
PIPE FOR HIGH-TEMPERATURE CENTRAL-STATION SERVICE
ASTM A377-2003：STANDARD INDEX OF SPECIFICATIONS FOR DUCTILE-IRON PRESSURE
PIPE
ASTM A380-1999(R05)(E)：STANDARD PRACTICE FOR CLEANING, DESCALING, AND
PASSIVATION OF STAINLESS STEEL PARTS, EQUIPMENT, AND SYSTEMS
ASTM A381-1996(R05)：STANDARD SPECIFICATION FOR METAL-ARC-WELDED STEEL
PIPE FOR USE WITH HIGH-PRESSURE TRANSMISSION SYSTEMS
ASTM A384/A384M-2002：STANDARD PRACTICE FOR SAFEGUARDING AGAINST WARPAGE
AND DISTORTION DURING HOT- DIP GALVANIZING OF STEEL ASSEMBLIES
ASTM A385-2005：STANDARD PRACTICE FOR PROVIDING HIGH-QUALITY ZINC COATINGS
(HOT-DIP)
ASTM A387/A387M-2003 压力容器用铬钼合金钢板的标准规范
ASTM A387/A387M-2006：STANDARD SPECIFICATION FOR PRESSURE VESSEL PLATES,
ALLOY STEEL, CHROMIUM- MOLYBDENUM
ASTM A388/A388M-2005：STANDARD PRACTICE FOR ULTRASONIC EXAMINATION OF HEAVY
STEEL FORGINGS
ASTM A389/A389M-2003：STANDARD SPECIFICATION FOR STEEL CASTINGS, ALLOY,
SPECIALLY HEAT-TREATED, FOR PRESSURE-CONTAINING PARTS, SUITABLE FOR HIGH-TEMPERATURE
SERVICE
ASTM A390-1995(R01)：STANDARD SPECIFICATION FOR ZINC-COATED (GALVANIZED)
STEEL POULTRY FENCE FABRIC (HEXAGONAL AND STRAIGHT LINE)
ASTM A391/A391M-2001：STANDARD SPECIFICATION FOR GRADE 80 ALLOY STEEL CHAIN
ASTM A392-2003：STANDARD SPECIFICATION FOR ZINC-COATED STEEL CHAIN-LINK
FENCE FABRIC
ASTM A394-2005：STANDARD SPECIFICATION FOR STEEL TRANSMISSION TOWER BOLTS,
ZINC-COATED AND BARE
ASTM A395/A395M-1999 高温用铁素体球墨铸铁承压铸件
ASTM A395/A395M-1999(R04)：STANDARD SPECIFICATION FOR FERRITIC DUCTILE
IRON PRESSURE-RETAINING CASTINGS FOR USE AT ELEVATED TEMPERATURES
ASTM A400-1969(R06)：STANDARD PRACTICE FOR STEEL BARS, SELECTION GUIDE,
COMPOSITION, AND MECHANICAL PROPERTIES
ASTM A401/A401M-2003：STANDARD SPECIFICATION FOR STEEL WIRE, CHROMIUM-SILICON
ALLOY
ASTM A403/A403M-2004 锻制奥氏体不锈钢管配件的标准规范
ASTM A403/A403M-2006：STANDARD SPECIFICATION FOR WROUGHT AUSTENITIC STAINLESS
STEEL PIPING FITTINGS
ASTM A407-1993(R04)：STANDARD SPECIFICATION FOR STEEL WIRE, COLD-DRAWN,
FOR COILED-TYPE SPRINGS
ASTM A409/A409M-2001(R05)：STANDARD SPECIFICATION FOR WELDED LARGE DIAMETER
AUSTENITIC STEEL PIPE FOR CORROSIVE OR HIGH-TEMPERATURE SERVICE
ASTM A411-2003：STANDARD SPECIFICATION FOR ZINC-COATED (GALVANIZED) LOW-CARBON
STEEL ARMOR WIRE
ASTM A413/A413M-2001：STANDARD SPECIFICATION FOR CARBON STEEL CHAIN
ASTM A414/A414M-2006：STANDARD SPECIFICATION FOR STEEL, SHEET, CARBON,
FOR PRESSURE VESSELS
ASTM A416/A416M-2005：STANDARD SPECIFICATION FOR STEEL STRAND, UNCOATED
SEVEN-WIRE FOR PRESTRESSED CONCRETE
ASTM A417-1993(R04)：STANDARD SPECIFICATION FOR STEEL WIRE, COLD-DRAWN,
FOR ZIG-ZAG, SQUARE-FORMED, AND SINUOUS-TYPE UPHOLSTERY SPRING UNITS
ASTM A418/A418M-2005：STANDARD TEST METHOD FOR ULTRASONIC EXAMINATION OF
TURBINE AND GENERATOR STEEL ROTOR FORGINGS
ASTM A420/A420M-2006：STANDARD SPECIFICATION FOR PIPING FITTINGS OF WROUGHT
CARBON STEEL AND ALLOY STEEL FOR LOW-TEMPERATURE SERVICE
ASTM A421/A421M-2005：STANDARD SPECIFICATION FOR UNCOATED STRESS-RELIEVED
STEEL WIRE FOR PRESTRESSED CONCRETE - AASHTO NO.: M 204
ASTM A423/A423M-1995(R04)：STANDARD SPECIFICATION FOR SEAMLESS AND ELECTRIC-WELDED
LOW-ALLOY STEEL TUBES
ASTM A424-2006：STANDARD SPECIFICATION FOR STEEL, SHEET, FOR PORCELAIN
ENAMELING
ASTM A426/A426M-2005：STANDARD SPECIFICATION FOR CENTRIFUGALLY CAST FERRITIC
ALLOY STEEL PIPE FOR HIGH-TEMPERATURE SERVICE
ASTM A427-2002：STANDARD SPECIFICATION FOR WROUGHT ALLOY STEEL ROLLS FOR
COLD AND HOT REDUCTION
ASTM A428/A428M-2001：STANDARD TEST METHOD FOR WEIGHT (MASS) OF COATING
ON ALUMINUM-COATED IRON OR STEEL ARTICLES
ASTM A434-2004：STANDARD SPECIFICATION FOR STEEL BARS, ALLOY, HOT-WROUGHT
OR COLD-FINISHED, QUENCHED AND TEMPERED
ASTM A435/A435M-1990(R01)：STANDARD SPECIFICATION FOR STRAIGHT-BEAM ULTRASONIC
EXAMINATION OF STEEL PLATES
ASTM A436-1984(R01)：STANDARD SPECIFICATION FOR AUSTENITIC GRAY IRON CASTINGS
ASTM A437/A437M-2006：STANDARD SPECIFICATION FOR ALLOY-STEEL TURBINE-TYPE
BOLTING MATERIAL SPECIALLY HEAT TREATED FOR HIGH-TEMPERATURE SERVICE
ASTM A439-1983(R04)：STANDARD SPECIFICATION FOR AUSTENITIC DUCTILE IRON
CASTINGS
ASTM A439-1983(R1999) 奥氏体球墨铸铁件
ASTM A447/A447M-1993(R03)：STANDARD SPECIFICATION FOR STEEL CASTINGS, CHROMIUM-NICKEL-IRON
ALLOY (25-12 CLASS), FOR HIGH-TEMPERATURE SERVICE
ASTM A449-2004B：STANDARD SPECIFICATION FOR HEX CAP SCREWS, BOLTS AND STUDS,
STEEL, HEAT TREATED, 120/ 105/90 KSI MINIMUM TENSILE STRENGTH, GENERAL
USE
ASTM A450/A450M-2004 碳素钢管、铁素体合金钢管及奥氏体合金钢管一般要求的标准规范
ASTM A450/A450M-2004A：STANDARD SPECIFICATION FOR GENERAL REQUIREMENTS
FOR CARBON, FERRITIC ALLOY, AND AUSTENITIC ALLOY STEEL TUBES
ASTM A451/A451M-2002：STANDARD SPECIFICATION FOR CENTRIFUGALLY CAST AUSTENITIC
STEEL PIPE FOR HIGH-TEMPERATURE SERVICE
ASTM A453/A453M-2004：STANDARD SPECIFICATION FOR HIGH-TEMPERATURE BOLTING
MATERIALS, WITH EXPANSION COEFFICIENTS COMPARABLE TO AUSTENITIC STAINLESS
STEELS
ASTM A455/A455M-2003：STANDARD SPECIFICATION FOR PRESSURE VESSEL PLATES,
CARBON STEEL, HIGH-STRENGTH MANGANESE
ASTM A456/A456M-1999(R03)：STANDARD SPECIFICATION FOR MAGNETIC PARTICLE
EXAMINATION OF LARGE CRANKSHAFT FORGINGS
ASTM A459-1997(R03)：STANDARD SPECIFICATION FOR ZINC-COATED FLAT STEEL
ARMORING TAPE
ASTM A460-1994(R04)(E)：STANDARD SPECIFICATION FOR COPPER-CLAD STEEL WIRE
STRAND
ASTM A463/A463M-2005：STANDARD SPECIFICATION FOR STEEL SHEET, ALUMINUM-COATED,
BY THE HOT-DIP PROCESS
ASTM A466/A466M-2001：STANDARD SPECIFICATION FOR WELDLESS CHAIN
ASTM A467/A467M-2001：STANDARD SPECIFICATION FOR MACHINE AND COIL CHAIN
ASTM A469/A469M-2006：STANDARD SPECIFICATION FOR VACUUM-TREATED STEEL FORGINGS
FOR GENERATOR ROTORS
ASTM A47/A47M-1999(R04)：STANDARD SPECIFICATION FOR FERRITIC MALLEABLE
IRON CASTINGS
ASTM A470/A470M-2005：STANDARD SPECIFICATION FOR VACUUM-TREATED CARBON
AND ALLOY STEEL FORGINGS FOR TURBINE ROTORS AND SHAFTS
ASTM A471-2005：STANDARD SPECIFICATION FOR VACUUM-TREATED ALLOY STEEL FORGINGS
FOR TURBINE ROTOR DISKS AND WHEELS
ASTM A472/A472M-2005：STANDARD TEST METHOD FOR HEAT STABILITY OF STEAM
TURBINE SHAFTS AND ROTOR FORGINGS
ASTM A473-2001：STANDARD SPECIFICATION FOR STAINLESS STEEL FORGINGS
ASTM A474-2003：STANDARD SPECIFICATION FOR ALUMINUM-COATED STEEL WIRE STRAND
ASTM A475-2003：STANDARD SPECIFICATION FOR ZINC-COATED STEEL WIRE STRAND
ASTM A476/A476M-2000(R05)：STANDARD SPECIFICATION FOR DUCTILE IRON CASTINGS
FOR PAPER MILL DRYER ROLLS
ASTM A478-1997(R02)：STANDARD SPECIFICATION FOR CHROMIUM-NICKEL STAINLESS
STEEL WEAVING AND KNITTING WIRE
ASTM A479/A479M-2006：STANDARD SPECIFICATION FOR STAINLESS STEEL BARS AND
SHAPES FOR USE IN BOILERS AND OTHER PRESSURE VESSELS
ASTM A48/A48M-2003 灰铸铁铸件标准技术条件
ASTM A48/A48M-2003：STANDARD SPECIFICATION FOR GRAY IRON CASTINGS
ASTM A480/A480M-2006：STANDARD SPECIFICATION FOR GENERAL REQUIREMENTS FOR
FLAT-ROLLED STAINLESS AND HEAT-RESISTING STEEL PLATE, SHEET, AND STRIP
ASTM A481-2005：STANDARD SPECIFICATION FOR CHROMIUM METAL
ASTM A482-2005：STANDARD SPECIFICATION FOR FERROCHROME-SILICON
ASTM A483-2004：STANDARD SPECIFICATION FOR SILICOMANGANESE
ASTM A484/A484M-2006：STANDARD SPECIFICATION FOR GENERAL REQUIREMENTS FOR
STAINLESS STEEL BARS, BILLETS, AND FORGINGS
ASTM A485-2003：STANDARD SPECIFICATION FOR HIGH HARDENABILITY ANTIFRICTION
BEARING STEEL
ASTM A487/A487M-1993(R03)：STANDARD SPECIFICATION FOR STEEL CASTINGS SUITABLE
FOR PRESSURE SERVICE
ASTM A488/A488M-2004：STANDARD PRACTICE FOR STEEL CASTINGS, WELDING, QUALIFICATIONS
OF PROCEDURES AND PERSONNEL
ASTM A489-2004：STANDARD SPECIFICATION FOR CARBON STEEL LIFTING EYES
ASTM A490-2004A：STANDARD SPECIFICATION FOR STRUCTURAL BOLTS, ALLOY STEEL,
HEAT TREATED, 150 KSI MINIMUM TENSILE STRENGTH - AASHTO NO.: M 253
ASTM A490M-2004A：STANDARD SPECIFICATION FOR HIGH-STRENGTH STEEL BOLTS,
CLASSES 10.9 AND 10.9.3, FOR STRUCTURAL STEEL JOINTS [METRIC]
ASTM A491-2003：STANDARD SPECIFICATION FOR ALUMINUM-COATED STEEL CHAIN-LINK
FENCE FABRIC
ASTM A49-2001(R06)：STANDARD SPECIFICATION FOR HEAT-TREATED CARBON STEEL
JOINT BARS, MICROALLOYED JOINT BARS, AND FORGED CARBON STEEL COMPROMISE
JOINT BARS
ASTM A492-1995(R04)：STANDARD SPECIFICATION FOR STAINLESS STEEL ROPE WIRE
ASTM A493-1995(R04)：STANDARD SPECIFICATION FOR STAINLESS STEEL WIRE AND
WIRE RODS FOR COLD HEADING AND COLD FORGING
ASTM A494/A494M-2005：STANDARD SPECIFICATION FOR CASTINGS, NICKEL AND NICKEL
ALLOY
ASTM A495-1994(R00)：STANDARD SPECIFICATION FOR CALCIUM-SILICON ALLOYS
ASTM A496/A496M-2005：STANDARD SPECIFICATION FOR STEEL WIRE, DEFORMED,
FOR CONCRETE REINFORCEMENT
ASTM A497/A497M-2006(E)：STANDARD SPECIFICATION FOR STEEL WELDED WIRE REINFORCEMENT,
DEFORMED, FOR CONCRETE
ASTM A498-2004：STANDARD SPECIFICATION FOR SEAMLESS AND WELDED CARBON STEEL
HEAT-EXCHANGER TUBES WITH INTEGRAL FINS
ASTM A499-1989(R02)：STANDARD SPECIFICATION FOR STEEL BARS AND SHAPES,
CARBON ROLLED FROM T RAILS
ASTM A500-2003a 圆形与异型冷成型焊接与无缝碳素钢结构管标准规范
ASTM A500-2003A：STANDARD SPECIFICATION FOR COLD-FORMED WELDED AND SEAMLESS
CARBON STEEL STRUCTURAL TUBING IN ROUNDS AND SHAPES
ASTM A501-2001(R05)：STANDARD SPECIFICATION FOR HOT-FORMED WELDED AND SEAMLESS
CARBON STEEL STRUCTURAL TUBING
ASTM A502-2003：STANDARD SPECIFICATION FOR RIVETS, STEEL, STRUCTURAL
ASTM A503/A503M-2001(R06)：STANDARD SPECIFICATION FOR ULTRASONIC EXAMINATION
OF FORGED CRANKSHAFTS
ASTM A504/A504M-2004(E)：STANDARD SPECIFICATION FOR WROUGHT CARBON STEEL
WHEELS
ASTM A505-2000(R05)：STANDARD SPECIFICATION FOR STEEL, SHEET AND STRIP,
ALLOY, HOT-ROLLED AND COLD-ROLLED, GENERAL REQUIREMENTS FOR
ASTM A506-2005：STANDARD SPECIFICATION FOR ALLOY AND STRUCTURAL ALLOY STEEL,
SHEET AND STRIP, HOT-ROLLED AND COLD-ROLLED
ASTM A507-2006：STANDARD SPECIFICATION FOR DRAWING ALLOY STEEL, SHEET AND
STRIP, HOT-ROLLED AND COLD-ROLLED
ASTM A508/A508M-2005B：STANDARD SPECIFICATION FOR QUENCHED AND TEMPERED
VACUUM-TREATED CARBON AND ALLOY STEEL FORGINGS FOR PRESSURE VESSELS
ASTM A510-2003：STANDARD SPECIFICATION FOR GENERAL REQUIREMENTS FOR WIRE
RODS AND COARSE ROUND WIRE, CARBON STEEL
ASTM A510M-2003：STANDARD SPECIFICATION FOR GENERAL REQUIREMENTS FOR WIRE
RODS AND COARSE ROUND WIRE, CARBON STEEL [METRIC]
ASTM A511-2004：STANDARD SPECIFICATION FOR SEAMLESS STAINLESS STEEL MECHANICAL
TUBING
ASTM A512-1996(R05)：STANDARD SPECIFICATION FOR COLD-DRAWN BUTTWELD CARBON
STEEL MECHANICAL TUBING
ASTM A513-2000：STANDARD SPECIFICATION FOR ELECTRIC-RESISTANCE-WELDED CARBON
AND ALLOY STEEL MECHANICAL TUBING
ASTM A514/A514M-2005：STANDARD SPECIFICATION FOR HIGH-YIELD-STRENGTH, QUENCHED
AND TEMPERED ALLOY STEEL PLATE, SUITABLE FOR WELDING
ASTM A515/A515M-2003：STANDARD SPECIFICATION FOR PRESSURE VESSEL PLATES,
CARBON STEEL, FOR INTERMEDIATE- AND HIGHER-TEMPERATURE SERVICE
ASTM A515-2003 中温及高温压力容器用碳素钢板的标准规范
ASTM A516/A516M-2006：STANDARD SPECIFICATION FOR PRESSURE VESSEL PLATES,
CARBON STEEL, FOR MODERATE- AND LOWER-TEMPERATURE SERVICE
ASTM A516-2004a 中温及低温压力容器用碳素钢板的标准规范
ASTM A517/A517M-1993(R04)(E)：STANDARD SPECIFICATION FOR PRESSURE VESSEL
PLATES, ALLOY STEEL, HIGH-STRENGTH, QUENCHED AND TEMPERED
ASTM A518/A518M-1999(R03)：STANDARD SPECIFICATION FOR CORROSION-RESISTANT
HIGH-SILICON IRON CASTINGS
ASTM A519-2003 机械工程用碳素钢和铝合金钢无缝钢管
ASTM A519-2003：STANDARD SPECIFICATION FOR SEAMLESS CARBON AND ALLOY STEEL
MECHANICAL TUBING
ASTM A521-2003：STANDARD SPECIFICATION FOR STEEL, CLOSED-IMPRESSION DIE
FORGINGS FOR GENERAL INDUSTRIAL USE
ASTM A522/A522M-2001：STANDARD SPECIFICATION FOR FORGED OR ROLLED 8 AND
9% NICKEL ALLOY STEEL FLANGES, FITTINGS, VALVES, AND PARTS FOR LOW-TEMPERATURE
SERVICE
ASTM A523-1996(R05)：STANDARD SPECIFICATION FOR PLAIN END SEAMLESS AND
ELECTRIC-RESISTANCE-WELDED STEEL PIPE FOR HIGH-PRESSURE PIPE-TYPE CABLE
CIRCUITS
ASTM A524-1996(R05)：STANDARD SPECIFICATION FOR SEAMLESS CARBON STEEL PIPE
FOR ATMOSPHERIC AND LOWER TEMPERATURES
ASTM A529/A529M-2005：STANDARD SPECIFICATION FOR HIGH-STRENGTH CARBON-MANGANESE
STEEL OF STRUCTURAL QUALITY
ASTM A53/A53M-2005：STANDARD SPECIFICATION FOR PIPE, STEEL, BLACK AND HOT-DIPPED,
ZINC-COATED, WELDED AND SEAMLESS
ASTM A530/A530M-2004A：STANDARD SPECIFICATION FOR GENERAL REQUIREMENTS
FOR SPECIALIZED CARBON AND ALLOY STEEL PIPE
ASTM A530-2003 特种碳素钢和合金钢管一般要求的标准规范
ASTM A531/A531M-1991(R06)：STANDARD PRACTICE FOR ULTRASONIC EXAMINATION
OF TURBINE-GENERATOR STEEL RETAINING RINGS
ASTM A532/A532M-1993A(R03)：STANDARD SPECIFICATION FOR ABRASION-RESISTANT
CAST IRONS
ASTM A533/A533M-1993(R04)(E)：STANDARD SPECIFICATION FOR PRESSURE VESSEL
PLATES, ALLOY STEEL, QUENCHED AND TEMPERED, MANGANESE-MOLYBDENUM AND MANGANESE-MOLYBDENUM-NICKEL
ASTM A534-2004：STANDARD SPECIFICATION FOR CARBURIZING STEELS FOR ANTI-FRICTION
BEARINGS
ASTM A536-1984(R04)：STANDARD SPECIFICATION FOR DUCTILE IRON CASTINGS
ASTM A536-1984(R1999) 球墨铸铁件
ASTM A537/A537M-2006：STANDARD SPECIFICATION FOR PRESSURE VESSEL PLATES,
HEAT-TREATED, CARBON-MANGANESE-SILICON STEEL
ASTM A540/A540M-2006：STANDARD SPECIFICATION FOR ALLOY-STEEL BOLTING MATERIALS
FOR SPECIAL APPLICATIONS
ASTM A541/A541M-2005：STANDARD SPECIFICATION FOR QUENCHED AND TEMPERED
CARBON AND ALLOY STEEL FORGINGS FOR PRESSURE VESSEL COMPONENTS
ASTM A542/A542M-1999(R04)(E)：STANDARD SPECIFICATION FOR PRESSURE VESSEL
PLATES, ALLOY STEEL, QUENCHED-AND-TEMPERED, CHROMIUM-MOLYBDENUM, AND CHROMIUM-MOLYBDENUM-VANADIUM
ASTM A543/A543M-1993(R04)(E)：STANDARD SPECIFICATION FOR PRESSURE VESSEL
PLATES, ALLOY STEEL, QUENCHED AND TEMPERED NICKEL-CHROMIUM-MOLYBDENUM
ASTM A550-1978(R00)：STANDARD SPECIFICATION FOR FERROCOLUMBIUM
ASTM A551/A551M-2005：STANDARD SPECIFICATION FOR CARBON STEEL TIRES FOR
RAILWAY AND RAPID TRANSIT APPLICATIONS
ASTM A553/A553M-2006：STANDARD SPECIFICATION FOR PRESSURE VESSEL PLATES,
ALLOY STEEL, QUENCHED AND TEMPERED 8 AND 9 % NICKEL
ASTM A554-2003：STANDARD SPECIFICATION FOR WELDED STAINLESS STEEL MECHANICAL
TUBING
ASTM A555/A555M-2005：STANDARD SPECIFICATION FOR GENERAL REQUIREMENTS FOR
STAINLESS STEEL WIRE AND WIRE RODS
ASTM A556/A556M-1996(R05)：STANDARD SPECIFICATION FOR SEAMLESS COLD-DRAWN
CARBON STEEL FEEDWATER HEATER TUBES
ASTM A560/A560M-2005：STANDARD SPECIFICATION FOR CASTINGS, CHROMIUM-NICKEL
ALLOY
ASTM A561-1971(R04)：STANDARD PRACTICE FOR MACROETCH TESTING OF TOOL STEEL
BARS
ASTM A562/A562M-2006：STANDARD SPECIFICATION FOR PRESSURE VESSEL PLATES,
CARBON STEEL, MANGANESE-TITANIUM FOR GLASS OR DIFFUSED METALLIC COATINGS
ASTM A563-2004A：STANDARD SPECIFICATION FOR CARBON AND ALLOY STEEL NUTS
ASTM A563M-2004：STANDARD SPECIFICATION FOR CARBON AND ALLOY STEEL NUTS
[METRIC]
ASTM A564/A564M-2004：STANDARD SPECIFICATION FOR HOT-ROLLED AND COLD-FINISHED
AGE-HARDENING STAINLESS STEEL BARS AND SHAPES
ASTM A565/A565M-2005A：STANDARD SPECIFICATION FOR MARTENSITIC STAINLESS
STEEL BARS FOR HIGH-TEMPERATURE SERVICE
ASTM A568/A568M-2006：STANDARD SPECIFICATION FOR STEEL, SHEET, CARBON,
STRUCTURAL, AND HIGH-STRENGTH, LOW-ALLOY, HOT-ROLLED AND COLD-ROLLED,
GENERAL REQUIREMENTS FOR
ASTM A571/A571M-2001：STANDARD SPECIFICATION FOR AUSTENITIC DUCTILE IRON
CASTINGS FOR PRESSURE-CONTAINING PARTS SUITABLE FOR LOW-TEMPERATURE SERVICE
ASTM A572/A572M-2006：STANDARD SPECIFICATION FOR HIGH-STRENGTH LOW-ALLOY
COLUMBIUM-VANADIUM STRUCTURAL STEEL - AASHTO NO.: M223
ASTM A573/A573M-2005：STANDARD SPECIFICATION FOR STRUCTURAL CARBON STEEL
PLATES OF IMPROVED TOUGHNESS
ASTM A574-2004：STANDARD SPECIFICATION FOR ALLOY STEEL SOCKET-HEAD CAP
SCREWS
ASTM A574M-2004：STANDARD SPECIFICATION FOR ALLOY STEEL SOCKET-HEAD CAP
SCREWS [METRIC]
ASTM A575-1996(R02)：STANDARD SPECIFICATION FOR STEEL BARS, CARBON, MERCHANT
QUALITY, M-GRADES
ASTM A576-1990B(R06)：STANDARD SPECIFICATION FOR STEEL BARS, CARBON, HOT-WROUGHT,
SPECIAL QUALITY
ASTM A577/A577M-1990(R01)：STANDARD SPECIFICATION FOR ULTRASONIC ANGLE-BEAM
EXAMINATION OF STEEL PLATES
ASTM A578/A578M-1996(R01)：STANDARD SPECIFICATION FOR STRAIGHT-BEAM ULTRASONIC
EXAMINATION OF PLAIN AND CLAD STEEL PLATES FOR SPECIAL APPLICATIONS
ASTM A579/A579M-2004A：STANDARD SPECIFICATION FOR SUPERSTRENGTH ALLOY STEEL
FORGINGS
ASTM A580/A580M-2006：STANDARD SPECIFICATION FOR STAINLESS STEEL WIRE
ASTM A581/A581M-1995B(R04)：STANDARD SPECIFICATION FOR FREE-MACHINING STAINLESS
STEEL WIRE AND WIRE RODS
ASTM A582/A582M-2005：STANDARD SPECIFICATION FOR FREE-MACHINING STAINLESS
STEEL BARS
ASTM A586-2004A：STANDARD SPECIFICATION FOR ZINC-COATED PARALLEL AND HELICAL
STEEL WIRE STRUCTURAL STRAND
ASTM A587-1996(R05)：STANDARD SPECIFICATION FOR ELECTRIC-RESISTANCE-WELDED
LOW-CARBON STEEL PIPE FOR THE CHEMICAL INDUSTRY
ASTM A588/A588M-2005：STANDARD SPECIFICATION FOR HIGH-STRENGTH LOW-ALLOY
STRUCTURAL STEEL, UP TO 50 KSI [345 MPA] MINIMUM YIELD POINT, WITH ATMOSPHERIC
CORROSION RESISTANCE - AASHTO NO.: M 222
ASTM A589/A589M-2006 打水井用碳素钢无缝钢管和焊接钢管
ASTM A589/A589M-2006：STANDARD SPECIFICATION FOR SEAMLESS AND WELDED CARBON
STEEL WATER-WELL PIPE
ASTM A591/A591M-1998：STANDARD SPECIFICATION FOR STEEL SHEET, ELECTROLYTIC
ZINC-COATED, FOR LIGHT COATING WEIGHT (MASS) APPLICATIONS
ASTM A592/A592M-2004：STANDARD SPECIFICATION FOR HIGH-STRENGTH QUENCHED
AND TEMPERED LOW-ALLOY STEEL FORGED FITTINGS AND PARTS FOR PRESSURE VESSELS
ASTM A595/A595M-2006：STANDARD SPECIFICATION FOR STEEL TUBES, LOW-CARBON
OR HIGH-STRENGTH LOW-ALLOY, TAPERED FOR STRUCTURAL USE
ASTM A596/A596M-1995(R04)：STANDARD TEST METHOD FOR DIRECT-CURRENT MAGNETIC
PROPERTIES OF MATERIALS USING THE BALLISTIC METHOD AND RING SPECIMENS
ASTM A597-1987(R04)：STANDARD SPECIFICATION FOR CAST TOOL STEEL
ASTM A598/A598M-2002：STANDARD TEST METHOD FOR MAGNETIC PROPERTIES OF MAGNETIC
AMPLIFIER CORES
ASTM A599/A599M-2002：STANDARD SPECIFICATION FOR TIN MILL PRODUCTS, ELECTROLYTIC
TIN-COATED, COLD-ROLLED SHEET
ASTM A6/A6M-2004 a 结构用轧制钢板、型钢、板桩和棒钢通用要求
ASTM A6/A6M-2005A：STANDARD SPECIFICATION FOR GENERAL REQUIREMENTS FOR
ROLLED STRUCTURAL STEEL BARS, PLATES, SHAPES, AND SHEET PILING
ASTM A600-1992A(R04)：STANDARD SPECIFICATION FOR TOOL STEEL HIGH SPEED
ASTM A601-2005：STANDARD SPECIFICATION FOR ELECTROLYTIC MANGANESE METAL
ASTM A602-1994(R04)：STANDARD SPECIFICATION FOR AUTOMOTIVE MALLEABLE IRON
CASTINGS
ASTM A603-1998(R03)：STANDARD SPECIFICATION FOR ZINC-COATED STEEL STRUCTURAL
WIRE ROPE
ASTM A604-1993(R03)：STANDARD TEST METHOD FOR MACROETCH TESTING OF CONSUMABLE
ELECTRODE REMELTED STEEL BARS AND BILLETS
ASTM A606-2004：STANDARD SPECIFICATION FOR STEEL, SHEET AND STRIP, HIGH-STRENGTH,
LOW-ALLOY, HOT-ROLLED AND COLD-ROLLED, WITH IMPROVED ATMOSPHERIC CORROSION
RESISTANCE
ASTM A608/A608M-2002：STANDARD SPECIFICATION FOR CENTRIFUGALLY CAST IRON-CHROMIUM-NICKEL
HIGH-ALLOY TUBING FOR PRESSURE APPLICATION AT HIGH TEMPERATURES
ASTM A609/A609M-1991(R02)：STANDARD PRACTICE FOR CASTINGS, CARBON, LOW-ALLOY,
AND MARTENSITIC STAINLESS STEEL, ULTRASONIC EXAMINATION THEREOF
ASTM A609/A609M-1991（R2002）碳钢、低合金钢和马氏体不锈钢铸件超声波检验
ASTM A610-1979(R04)：STANDARD TEST METHODS FOR SAMPLING AND TESTING FERROALLOYS
FOR DETERMINATION OF SIZE
ASTM A612/A612M-2003：STANDARD SPECIFICATION FOR PRESSURE VESSEL PLATES,
CARBON STEEL, HIGH STRENGTH, FOR MODERATE AND LOWER TEMPERATURE SERVICE
ASTM A615/A615M-2004a 混凝土配筋用异形钢筋和无节钢胚棒标准规范
ASTM A615/A615M-2006：STANDARD SPECIFICATION FOR DEFORMED AND PLAIN CARBON
STEEL BARS FOR CONCRETE REINFORCEMENT - AASHTO NO. M 31
ASTM A618/A618M-2004：STANDARD SPECIFICATION FOR HOT-FORMED WELDED AND
SEAMLESS HIGH-STRENGTH LOW-ALLOY STRUCTURAL TUBING
ASTM A623-2006：STANDARD SPECIFICATION FOR TIN MILL PRODUCTS, GENERAL REQUIREMENTS
ASTM A623M-2006：STANDARD SPECIFICATION FOR TIN MILL PRODUCTS, GENERAL
REQUIREMENTS [METRIC]
ASTM A624/A624M-2003：STANDARD SPECIFICATION FOR TIN MILL PRODUCTS, ELECTROLYTIC
TIN PLATE, SINGLE REDUCED
ASTM A625/A625M-2003：STANDARD SPECIFICATION FOR TIN MILL PRODUCTS, BLACK
PLATE, SINGLE-REDUCED
ASTM A626/A626M-2003：STANDARD SPECIFICATION FOR TIN MILL PRODUCTS, ELECTROLYTIC
TIN PLATE, DOUBLE REDUCED
ASTM A627-2003：STANDARD TEST METHODS FOR TOOL-RESISTING STEEL BARS, FLATS,
AND SHAPES FOR DETENTION AND CORRECTIONAL FACILITIES
ASTM A630-2003：STANDARD TEST METHODS FOR DETERMINATION OF TIN COATING
WEIGHTS FOR ELECTROLYTIC TIN PLATE
ASTM A632-2004：STANDARD SPECIFICATION FOR SEAMLESS AND WELDED AUSTENITIC
STAINLESS STEEL TUBING (SMALL-DIAMETER) FOR GENERAL SERVICE
ASTM A633/A633M-2001(R06)：STANDARD SPECIFICATION FOR NORMALIZED HIGH-STRENGTH
LOW-ALLOY STRUCTURAL STEEL PLATES
ASTM A635/A635M-2006：STANDARD SPECIFICATION FOR STEEL, SHEET AND STRIP,
HEAVY-THICKNESS COILS, HOT-ROLLED, CARBON, STRUCTURAL, HIGH-STRENGTH LOW-ALLOY,
AND HIGH-STRENGTH LOW-ALLOY WITH IMPROVED FORMABILITY, GENERAL REQUIREMENTS
FOR
ASTM A636-1976(R04)：STANDARD SPECIFICATION FOR NICKEL OXIDE SINTER
ASTM A638/A638M-2000(R04)：STANDARD SPECIFICATION FOR PRECIPITATION HARDENING
IRON BASE SUPERALLOY BARS, FORGINGS, AND FORGING STOCK FOR HIGH-TEMPERATURE
SERVICE
ASTM A640-1997(R02)(E)：STANDARD SPECIFICATION FOR ZINC-COATED STEEL STRAND
FOR MESSENGER SUPPORT OF FIGURE 8 CABLE
ASTM A641/A641M-2003：STANDARD SPECIFICATION FOR ZINC-COATED (GALVANIZED)
CARBON STEEL WIRE
ASTM A644-2005：STANDARD TERMINOLOGY RELATING TO IRON CASTINGS
ASTM A645/A645M-2005：STANDARD SPECIFICATION FOR PRESSURE VESSEL PLATES,
5 % AND 5 1.2 % NICKEL ALLOY STEELS, SPECIALLY HEAT TREATED
ASTM A646/A646M-2004：STANDARD SPECIFICATION FOR PREMIUM QUALITY ALLOY
STEEL BLOOMS AND BILLETS FOR AIRCRAFT AND AEROSPACE FORGINGS
ASTM A648-2004A：STANDARD SPECIFICATION FOR STEEL WIRE, HARD DRAWN FOR
PRESTRESSING CONCRETE PIPE
ASTM A649/A649M-2004：STANDARD SPECIFICATION FOR FORGED STEEL ROLLS USED
FOR CORRUGATING PAPER MACHINERY
ASTM A650/A650M-2003：STANDARD SPECIFICATION FOR TIN MILL PRODUCTS, BLACK
PLATE, DOUBLE REDUCED
ASTM A65-2001：STANDARD SPECIFICATION FOR STEEL TRACK SPIKES
ASTM A653/A653M-2005A：STANDARD SPECIFICATION FOR STEEL SHEET, ZINC-COATED
(GALVANIZED) OR ZINC-IRON ALLOY-COATED (GALVANNEALED) BY THE HOT-DIP PROCESS
ASTM A656/A656M-2005(E)：STANDARD SPECIFICATION FOR HOT-ROLLED STRUCTURAL
STEEL, HIGH-STRENGTH LOW-ALLOY PLATE WITH IMPROVED FORMABILITY
ASTM A657/A657M-2003：STANDARD SPECIFICATION FOR TIN MILL PRODUCTS, BLACK
PLATE ELECTROLYTIC CHROMIUM-COATED, SINGLE AND DOUBLE REDUCED
ASTM A659/A659M-1997(R01)：STANDARD SPECIFICATION FOR COMMERCIAL STEEL
(CS), SHEET AND STRIP, CARBON (0.16 MAXIMUM TO 0.25 MAXIMUM PERCENT),
HOT-ROLLED
ASTM A660-1996(R05)：STANDARD SPECIFICATION FOR CENTRIFUGALLY CAST CARBON
STEEL PIPE FOR HIGH-TEMPERATURE SERVICE
ASTM A662/A662M-2003：STANDARD SPECIFICATION FOR PRESSURE VESSEL PLATES,
CARBON-MANGANESE-SILICON STEEL, FOR MODERATE AND LOWER TEMPERATURE SERVICE
ASTM A66-2001：STANDARD SPECIFICATION FOR STEEL SCREW SPIKES
ASTM A663/A663M-1989(R00)：STANDARD SPECIFICATION FOR STEEL BARS, CARBON,
MERCHANT QUALITY, MECHANICAL PROPERTIES
ASTM A664-1999：STANDARD PRACTICE FOR IDENTIFICATION OF STANDARD ELECTRICAL
STEEL GRADES IN ASTM SPECIFICATIONS
ASTM A666-2003：STANDARD SPECIFICATION FOR ANNEALED OR COLD-WORKED AUSTENITIC
STAINLESS STEEL SHEET, STRIP, PLATE, AND FLAT BAR
ASTM A667/A667M-1987(R03)：STANDARD SPECIFICATION FOR CENTRIFUGALLY CAST
DUAL METAL (GRAY AND WHITE CAST IRON) CYLINDERS
ASTM A668/A668M-2004：STANDARD SPECIFICATION FOR STEEL FORGINGS, CARBON
AND ALLOY, FOR GENERAL INDUSTRIAL USE - AASHTO NO.: M 102
ASTM A671-2004：STANDARD SPECIFICATION FOR ELECTRIC-FUSION-WELDED STEEL
PIPE FOR ATMOSPHERIC AND LOWER TEMPERATURES
ASTM A67-2000(R05)：STANDARD SPECIFICATION FOR STEEL TIE PLATES, LOW-CARBON
AND HIGH-CARBON-HOT-WORKED
ASTM A672-1996(R05)：STANDARD SPECIFICATION FOR ELECTRIC-FUSION-WELDED
STEEL PIPE FOR HIGH-PRESSURE SERVICE AT MODERATE TEMPERATURES
ASTM A673/A673M-2005A：STANDARD SPECIFICATION FOR SAMPLING PROCEDURE FOR
IMPACT TESTING OF STRUCTURAL STEEL - AASHTO T 243
ASTM A674-2005：STANDARD PRACTICE FOR POLYETHYLENE ENCASEMENT FOR DUCTILE
IRON PIPE FOR WATER OR OTHER LIQUIDS
ASTM A675/A675M-2003(E)：STANDARD SPECIFICATION FOR STEEL BARS, CARBON,
HOT-WROUGHT, SPECIAL QUALITY, MECHANICAL PROPERTIES
ASTM A677-2005：STANDARD SPECIFICATION FOR NONORIENTED ELECTRICAL STEEL
FULLY PROCESSED TYPES
ASTM A678/A678M-2005：STANDARD SPECIFICATION FOR QUENCHED-AND-TEMPERED
CARBON AND HIGH-STRENGTH LOW-ALLOY STRUCTURAL STEEL PLATES
ASTM A679/A679M-2000：STANDARD SPECIFICATION FOR STEEL WIRE, HIGH TENSILE
STRENGTH, COLD DRAWN
ASTM A681-1994(R04)：STANDARD SPECIFICATION FOR TOOL STEELS ALLOY
ASTM A682/A682M-2005：STANDARD SPECIFICATION FOR STEEL, STRIP, HIGH-CARBON,
COLD-ROLLED, GENERAL REQUIREMENTS FOR
ASTM A683-2005：STANDARD SPECIFICATION FOR NONORIENTED ELECTRICAL STEEL,
SEMIPROCESSED TYPES
ASTM A684/A684M-1986(R02)：STANDARD SPECIFICATION FOR STEEL, STRIP, HIGH-CARBON,
COLD-ROLLED
ASTM A686-1992(R04)：STANDARD SPECIFICATION FOR TOOL STEEL, CARBON
ASTM A688/A688M-2004：STANDARD SPECIFICATION FOR WELDED AUSTENITIC STAINLESS
STEEL FEEDWATER HEATER TUBES
ASTM A689-1997(R02)：STANDARD SPECIFICATION FOR CARBON AND ALLOY STEEL
BARS FOR SPRINGS
ASTM A690/A690M-2005：STANDARD SPECIFICATION FOR HIGH-STRENGTH LOW-ALLOY
NICKEL, COPPER, PHOSPHORUS STEEL H-PILES AND SHEET PILING WITH ATMOSPHERIC
CORROSION RESISTANCE FOR USE IN MARINE ENVIRONMENTS
ASTM A691-1998(R02)：STANDARD SPECIFICATION FOR CARBON AND ALLOY STEEL
PIPE, ELECTRIC-FUSION-WELDED FOR HIGH-PRESSURE SERVICE AT HIGH TEMPERATURES
ASTM A693-2006：STANDARD SPECIFICATION FOR PRECIPITATION-HARDENING STAINLESS
AND HEAT-RESISTING STEEL PLATE, SHEET, AND STRIP
ASTM A694/A694M-2000 高温输送用管法兰、管件、阀门及零件用碳钢和合金钢锻件标准规范
ASTM A694/A694M-2003：STANDARD SPECIFICATION FOR CARBON AND ALLOY STEEL
FORGINGS FOR PIPE FLANGES, FITTINGS, VALVES, AND PARTS FOR HIGH-PRESSURE
TRANSMISSION SERVICE
ASTM A696-1990A(R06)：STANDARD SPECIFICATION FOR STEEL BARS, CARBON, HOT-WROUGHT
OR COLD-FINISHED, SPECIAL QUALITY, FOR PRESSURE PIPING COMPONENTS
ASTM A697/A697M-2003：STANDARD TEST METHOD FOR ALTERNATING CURRENT MAGNETIC
PROPERTIES OF LAMINATED CORE SPECIMEN USING VOLTMETER-AMMETER-WATTMETER
METHODS
ASTM A698/A698M-2002：STANDARD TEST METHOD FOR MAGNETIC SHIELD EFFICIENCY
IN ATTENUATING ALTERNATING MAGNETIC FIELDS
ASTM A700-2005：STANDARD PRACTICES FOR PACKAGING, MARKING, AND LOADING
METHODS FOR STEEL PRODUCTS FOR SHIPMENT
ASTM A701-2005：STANDARD SPECIFICATION FOR FERROMANGANESE-SILICON
ASTM A702-1989(R06)：STANDARD SPECIFICATION FOR STEEL FENCE POSTS AND ASSEMBLIES,
HOT WROUGHT
ASTM A703/A703M-2004 标准技术条件—承压件钢铸件通用要求
下一页