上一页
ASTM D3900-2005A：STANDARD
TEST METHODS FOR RUBBERDETERMINATION OF ETHYLENE UNITS IN ETHYLENE- PROPYLENE
COPOLYMERS (EPM) AND IN ETHYLENE-PROPYLENE- DIENE TERPOLYMERS (EPDM) BY
INFRARED SPECTROMETRY
ASTM D390-1992(R99)：STANDARD SPECIFICATION FOR COAL-TAR CREOSOTE FOR THE
PRESERVATIVE TREATMENT OF PILES, POLES, AND TIMBERS FOR MARINE, LAND,
AND FRESHWATER USE
ASTM D3902-1990(R04)(E)：STANDARD TEST METHOD FOR RUBBER HOSE FOR GAS DIFFUSION
OF LIQUEFIED PETROLEUM GAS
ASTM D3903-2003：STANDARD SPECIFICATION FOR RUBBER SEALS USED IN AIR-HEAT
TRANSPORT OF SOLAR ENERGY SYSTEMS
ASTM D3906-2003：STANDARD TEST METHOD FOR DETERMINATION OF RELATIVE X-RAY
DIFFRACTION INTENSITIES OF FAUJASITE-TYPE ZEOLITE-CONTAINING MATERIALS
ASTM D3907-2003：STANDARD METHOD FOR TESTING FLUID CATALYTIC CRACKING (FCC)
CATALYSTS BY MICROACTIVITY TEST - REINSTATED
ASTM D3908-2003：STANDARD TEST METHOD FOR HYDROGEN CHEMISORPTION ON SUPPORTED
PLATINUM CATALYSTS BY VOLUMETRIC VACUUM METHOD
ASTM D3909-1997B(R04)(E)：STANDARD SPECIFICATION FOR ASPHALT ROLL ROOFING
(GLASS FELT) SURFACED WITH MINERAL GRANULES
ASTM D3910-1998(R04)：STANDARD PRACTICES FOR DESIGN, TESTING, AND CONSTRUCTION
OF SLURRY SEAL
ASTM D3911-2003：STANDARD TEST METHOD FOR EVALUATING COATINGS USED IN LIGHT-WATER
NUCLEAR POWER PLANTS AT SIMULATED DESIGN BASIS ACCIDENT (DBA) CONDITIONS
ASTM D391-1994(R00)(E)：STANDARD SPECIFICATION FOR CREOSOTE-COAL TAR SOLUTION
ASTM D3912-1995(R01)：STANDARD TEST METHOD FOR CHEMICAL RESISTANCE OF COATINGS
USED IN LIGHT-WATER NUCLEAR POWER PLANTS
ASTM D3913-2003：STANDARD TEST METHOD FOR ACIDITY IN BASIC CHROMIUM TANNING
LIQUORS
ASTM D3914-2002：STANDARD TEST METHOD FOR IN-PLANE SHEAR STRENGTH OF PULTRUDED
GLASS-REINFORCED PLASTIC ROD
ASTM D3915-1999A(R04)：STANDARD SPECIFICATION FOR RIGID POLY(VINYL CHLORIDE)
(PVC) AND CHLORINATED POLY(VINYL CHLORIDE) (CPVC) COMPOUNDS FOR PLASTIC
PIPE AND FITTINGS USED IN PRESSURE APPLICATIONS
ASTM D3916-2002：STANDARD TEST METHOD FOR TENSILE PROPERTIES OF PULTRUDED
GLASS-FIBER-REINFORCED PLASTIC ROD
ASTM D3917-1996(R02)(E)：STANDARD SPECIFICATION FOR DIMENSIONAL TOLERANCE
OF THERMOSETTING GLASS-REINFORCED PLASTICS PULTRUDED SHAPES
ASTM D3918-1996(R03)：STANDARD TERMINOLOGY RELATING TO REINFORCED PLASTIC
PULTRUDED PRODUCTS
ASTM D3919-2004：STANDARD PRACTICE FOR MEASURING TRACE ELEMENTS IN WATER
BY GRAPHITE FURNACE ATOMIC ABSORPTION SPECTROPHOTOMETRY
ASTM D3920-2002：STANDARD TEST METHOD FOR STRONTIUM IN WATER
ASTM D3921-1996(R03)(E)：STANDARD TEST METHOD FOR OIL AND GREASE AND PETROLEUM
HYDROCARBONS IN WATER
ASTM D3923-1994(R03)(E)：STANDARD PRACTICES FOR DETECTING LEAKS IN REVERSE
OSMOSIS DEVICES
ASTM D3924-1980(R05)：STANDARD SPECIFICATION FOR STANDARD ENVIRONMENT FOR
CONDITIONING AND TESTING PAINT, VARNISH, LACQUER, AND RELATED MATERIALS
ASTM D3925-2002：STANDARD PRACTICE FOR SAMPLING LIQUID PAINTS AND RELATED
PIGMENTED COATINGS
ASTM D3926-2005：STANDARD TEST METHODS FOR PERCENT SOLIDS IN TITANIUM DIOXIDE
SLURRIES
ASTM D3928-2000A(R05)：STANDARD TEST METHOD FOR EVALUATION OF GLOSS OR
SHEEN UNIFORMITY
ASTM D3929-2003：STANDARD TEST METHOD FOR EVALUATING STRESS CRACKING OF
PLASTICS BY ADHESIVES USING THE BENT-BEAM METHOD
ASTM D3930-1993A(R05)：STANDARD SPECIFICATION FOR ADHESIVES FOR WOOD-BASED
MATERIALS FOR CONSTRUCTION OF MANUFACTURED HOMES
ASTM D3931-1993A(R05)：STANDARD TEST METHOD FOR DETERMINING STRENGTH OF
GAP-FILLING ADHESIVE BONDS IN SHEAR BY COMPRESSION LOADING
ASTM D3933-1998(R04)：STANDARD GUIDE FOR PREPARATION OF ALUMINUM SURFACES
FOR STRUCTURAL ADHESIVES BONDING (PHOSPHORIC ACID ANODIZING)
ASTM D3934-1990(R01)：STANDARD TEST METHOD FOR FLASH/NO FLASH TEST - EQUILIBRIUM
METHOD BY A CLOSED-CUP APPARATUS
ASTM D3935-2002：STANDARD SPECIFICATION FOR POLYCARBONATE (PC) UNFILLED
AND REINFORCED MATERIAL
ASTM D3936-2005：STANDARD TEST METHOD FOR RESISTANCE TO DELAMINATION OF
THE SECONDARY BACKING OF PILE YARN FLOOR COVERING
ASTM D3937-2001：STANDARD TEST METHOD FOR CRIMP FREQUENCY OF MANUFACTURED
STAPLE FIBERS
ASTM D3938-2000：STANDARD GUIDE FOR DETERMINING OR CONFIRMING CARE INSTRUCTIONS
FOR APPAREL AND OTHER TEXTILE CONSUMER PRODUCTS
ASTM D3939-2003(R04)：STANDARD TEST METHOD FOR SNAGGING RESISTANCE OF FABRICS
(MACE)
ASTM D3941-1990(R01)：STANDARD TEST METHOD FOR FLASH POINT BY THE EQUILIBRIUM
METHOD WITH A CLOSED-CUP APPARATUS
ASTM D3942-2003：STANDARD TEST METHOD FOR DETERMINATION OF THE UNIT CELL
DIMENSION OF A FAUJASITE-TYPE ZEOLITE
ASTM D3943-2004：STANDARD TEST METHOD FOR TOTAL MOLYBDENUM IN FRESH ALUMINA-BASE
CATALYSTS
ASTM D3944-1988(R05)：STANDARD TEST METHOD FOR SOLIDIFICATION POINT OF
PETROLEUM WAX
ASTM D3948-2005：STANDARD TEST METHOD FOR DETERMINING WATER SEPARATION
CHARACTERISTICS OF AVIATION TURBINE FUELS BY PORTABLE SEPAROMETER
ASTM D3949-1999(R04)：STANDARD SPECIFICATION FOR COATED GLASS FABRICS USED
FOR ELECTRICAL INSULATION
ASTM D3950-2005：STANDARD SPECIFICATION FOR STRAPPING, NONMETALLIC (AND
JOINING METHODS)
ASTM D3951-1998(R04)：STANDARD PRACTICE FOR COMMERCIAL PACKAGING
ASTM D395-2003：STANDARD TEST METHODS FOR RUBBER PROPERTYCOMPRESSION SET
ASTM D3953-2005：STANDARD SPECIFICATION FOR STRAPPING, FLAT STEEL AND SEALS
ASTM D3954-1994(R04)：STANDARD TEST METHOD FOR DROPPING POINT OF WAXES
ASTM D3955-2004：STANDARD SPECIFICATION FOR ELECTRICAL INSULATING VARNISHES
ASTM D3956-1993(R03)(E)：STANDARD SPECIFICATION FOR METHANE THERMOPHYSICAL
PROPERTY TABLES
ASTM D3957-2003：STANDARD PRACTICES FOR ESTABLISHING STRESS GRADES FOR
STRUCTURAL MEMBERS USED IN LOG BUILDINGS
ASTM D3958-2006：STANDARD TEST METHODS FOR RUBBER-EVALUATION OF BIIR AND
CIIR (HALOGENATED ISOBUTENE-ISOPRENE RUBBER)
ASTM D3960-2005：STANDARD PRACTICE FOR DETERMINING VOLATILE ORGANIC COMPOUND
(VOC) CONTENT OF PAINTS AND RELATED COATINGS
ASTM D396-2005：STANDARD SPECIFICATION FOR FUEL OILS
ASTM D3963/D3963M-2001：STANDARD SPECIFICATION FOR FABRICATION AND JOBSITE
HANDLING OF EPOXY-COATED STEEL REINFORCING BARS
ASTM D3964-2004：STANDARD PRACTICE FOR SELECTION OF COATING SPECIMENS FOR
APPEARANCE MEASUREMENTS
ASTM D3965-2005：STANDARD SPECIFICATION FOR RIGID ACRYLONITRILE-BUTADIENE-STYRENE
(ABS) MATERIALS FOR PIPE AND FITTINGS
ASTM D3967-2005：STANDARD TEST METHOD FOR SPLITTING TENSILE STRENGTH OF
INTACT ROCK CORE SPECIMENS
ASTM D3968-1997：STANDARD TEST METHOD FOR MONITORING OF ROTATIONAL TORQUE
OF TYPE IIIA CHILD-RESISTANT CLOSURES
ASTM D3969-2001：STANDARD TEST METHOD FOR ZIRCONIUM IN PAINT DRIERS BY
EDTA METHOD
ASTM D3970-2005：STANDARD TEST METHOD FOR CERIUM IN PAINT DRIERS BY OXIDIMETRIC
DETERMINATION
ASTM D3971-1989(R04)：STANDARD TEST METHOD FOR DICHLOROMETHANE-SOLUBLE
MATTER IN CELLULOSE
ASTM D3972-2002：STANDARD TEST METHOD FOR ISOTOPIC URANIUM IN WATER BY
RADIOCHEMISTRY
ASTM D3973-1985(R03)：STANDARD TEST METHOD FOR LOW-MOLECULAR WEIGHT HALOGENATED
HYDROCARBONS IN WATER
ASTM D3974-1981(R03)(E)：STANDARD PRACTICES FOR EXTRACTION OF TRACE ELEMENTS
FROM SEDIMENTS
ASTM D3975-1993(R03)：STANDARD PRACTICE FOR DEVELOPMENT AND USE (PREPARATION)
OF SAMPLES FOR COLLABORATIVE TESTING OF METHODS FOR ANALYSIS OF SEDIMENTS
ASTM D3976-1992(R05)：STANDARD PRACTICE FOR PREPARATION OF SEDIMENT SAMPLES
FOR CHEMICAL ANALYSIS
ASTM D3977-1997(R02)：STANDARD TEST METHODS FOR DETERMINING SEDIMENT CONCENTRATION
IN WATER SAMPLES
ASTM D3978-2004：STANDARD PRACTICE FOR ALGAL GROWTH POTENTIAL TESTING WITH
PSEUDOKIRCHNERIELLA SUBCAPITATA
ASTM D3981-2003：STANDARD SPECIFICATION FOR POLYETHYLENE FILMS MADE FROM
MEDIUM-DENSITY POLYETHYLENE FOR GENERAL USE AND PACKAGING APPLICATIONS
ASTM D3982-200ＳSTANDARD SPECIFICATION FOR CONTACT MOLDED "FIBERGLASS"
(GLASS FIBER REINFORCED THERMOSETTING RESIN) DUCT AND HOODS
ASTM D3983-1998(R04)：STANDARD TEST METHOD FOR MEASURING STRENGTH AND SHEAR
MODULUS OF NONRIGID ADHESIVES BY THE THICK-ADHEREND TENSILE-LAP SPECIMEN
ASTM D3984-1993(R03)：STANDARD SPECIFICATION FOR ETHANE THERMOPHYSICAL
PROPERTY TABLES
ASTM D3985-2005：STANDARD TEST METHOD FOR OXYGEN GAS TRANSMISSION RATE
THROUGH PLASTIC FILM AND SHEETING USING A COULOMETRIC SENSOR
ASTM D3986-2002：STANDARD TEST METHOD FOR BARIUM IN BRINES, SEAWATER, AND
BRACKISH WATER BY DIRECT-CURRENT ARGON PLASMA ATOMIC EMISSION SPECTROSCOPY
ASTM D3987-1985(R04)：STANDARD TEST METHOD FOR SHAKE EXTRACTION OF SOLID
WASTE WITH WATER
ASTM D3988-2005：STANDARD TEST METHOD FOR VANADIUM IN PAINT DRIERS BY EDTA
METHOD
ASTM D3989-2001：STANDARD TEST METHOD FOR TOTAL RARE EARTH METALS IN PAINT
DRIERS BY EDTA METHOD
ASTM D3990-1999(R04)：STANDARD TERMINOLOGY RELATING TO FABRIC DEFECTS
ASTM D3991-1994(R00)：STANDARD SPECIFICATIONS FOR FINENESS OF WOOL OR MOHAIR
AND ASSIGNMENT OF GRADE
ASTM D3992-1994(R00)：STANDARD SPECIFICATIONS FOR FINENESS OF WOOL TOP
OR MOHAIR TOP AND ASSIGNMENT OF GRADE
ASTM D3994-2002：STANDARD PERFORMANCE SPECIFICATION FOR WOVEN SWIMWEAR
FABRICS
ASTM D3995-2002：STANDARD PERFORMANCE SPECIFICATION FOR MEN- AND WOMEN-
KNITTED CAREER APPAREL FABRICS: DRESS AND VOCATIONAL
ASTM D3996-2002：STANDARD PERFORMANCE SPECIFICATION FOR KNIT SWIMWEAR FABRICS
ASTM D3997-1997(R04)：STANDARD PRACTICE FOR PREPARING COKE SAMPLES FOR
MICROSCOPICAL ANALYSIS BY REFLECTED LIGHT
ASTM D3999-1991(R03)：STANDARD TEST METHODS FOR THE DETERMINATION OF THE
MODULUS AND DAMPING PROPERTIES OF SOILS USING THE CYCLIC TRIAXIAL APPARATUS
ASTM D4000-2004：STANDARD CLASSIFICATION SYSTEM FOR SPECIFYING PLASTIC
MATERIALS
ASTM D4001-1993(R06)：STANDARD TEST METHOD FOR DETERMINATION OF WEIGHT-AVERAGE
MOLECULAR WEIGHT OF POLYMERS BY LIGHT SCATTERING
ASTM D4002-1981(R02)：STANDARD PRACTICE FOR EVALUATION OF BUFFABLE SHOE
POLISH
ASTM D4003-1998(R03)：STANDARD TEST METHODS FOR PROGRAMMABLE HORIZONTAL
IMPACT TEST FOR SHIPPING CONTAINERS AND SYSTEMS
ASTM D4004-1993(R02)：STANDARD TEST METHODS FOR RUBBERDETERMINATION OF
METAL CONTENT BY FLAME ATOMIC ABSORPTION (AAS) ANALYSIS
ASTM D4005-1992(R05)：STANDARD TEST METHOD FOR PLASTIC-COATED FABRICS-
COMPLETENESS OF FUSION OF PVC DISPERSION COATINGS
ASTM D4006-1981(R05)：STANDARD TEST METHOD FOR WATER IN CRUDE OIL BY DISTILLATION
- API DESIGNATION: CHAPTER 10.2 (MPMS); IP DESIGNATION: IP 358/97
ASTM D4007-2002：STANDARD TEST METHOD FOR WATER AND SEDIMENT IN CRUDE OIL
BY THE CENTRIFUGE METHOD (LABORATORY PROCEDURE) - API DESIGNATION: MANUAL
OF PETROLEUM MEASUREMENT STANDARDS (MPMS), CHAPTER 10.3
ASTM D4008-1995(R03)：STANDARD TEST METHOD FOR MEASURING ANTI-SOIL DEPOSITION
PROPERTIES OF LAUNDRY DETERGENTS (NOT SUITABLE FOR DETERGENT RANKING)
ASTM D4009-1992(R06)：STANDARD GUIDE FOR FOAM STABILITY OF HAND DISHWASHING
DETERGENTS
ASTM D4012-1981(R02)：STANDARD TEST METHOD FOR ADENOSINE TRIPHOSPHATE (ATP)
CONTENT OF MICROORGANISMS IN WATER
ASTM D4013-1998(R05)：STANDARD PRACTICE FOR PREPARATION OF TEST SPECIMENS
OF BITUMINOUS MIXTURES BY MEANS OF GYRATORY SHEAR COMPACTOR
ASTM D4014-2003：STANDARD SPECIFICATION FOR PLAIN AND STEEL-LAMINATED ELASTOMERIC
BEARINGS FOR BRIDGES
ASTM D4015-1992(R00)：STANDARD TEST METHODS FOR MODULUS AND DAMPING OF
SOILS BY THE RESONANT-COLUMN METHOD
ASTM D4016-2002：STANDARD TEST METHOD FOR VISCOSITY OF CHEMICAL GROUTS
BY BROOKFIELD VISCOMETER (LABORATORY METHOD)
ASTM D4017-2002：STANDARD TEST METHOD FOR WATER IN PAINTS AND PAINT MATERIALS
BY KARL FISCHER METHOD
ASTM D4018-1999(R04)：STANDARD TEST METHODS FOR PROPERTIES OF CONTINUOUS
FILAMENT CARBON AND GRAPHITE FIBER TOWS
ASTM D4020-2005：STANDARD SPECIFICATION FOR ULTRA-HIGH-MOLECULAR-WEIGHT
POLYETHYLENE MOLDING AND EXTRUSION MATERIALS
ASTM D402-2002：STANDARD TEST METHOD FOR DISTILLATION OF CUT-BACK ASPHALTIC
(BITUMINOUS) PRODUCTS - AASHTO NO. T78; IP DESIGNATION: 27/74(88)
ASTM D4022-1994(R00)：STANDARD SPECIFICATION FOR COAL TAR ROOF CEMENT,
ASBESTOS CONTAINING - E1
ASTM D4024-200ＵSTANDARD SPECIFICATION FOR MACHINE MADE "FIBERGLASS"
(GLASS-FIBER-REINFORCED THERMOSETTING RESIN) FLANGES
ASTM D4025-1997(R03)：STANDARD PRACTICE FOR REPORTING RESULTS OF EXAMINATION
AND ANALYSIS OF DEPOSITS FORMED FROM WATER FOR SUBSURFACE INJECTION
ASTM D4026-1987(R02)(E)：STANDARD TEST METHOD FOR RUBBER LATEX - STYRENE-BUTADIENE
COPOLYMER - DETERMINATION OF RESIDUAL STYRENE
ASTM D4027-1998(R04)：STANDARD TEST METHOD FOR MEASURING SHEAR PROPERTIES
OF STRUCTURAL ADHESIVES BY THE MODIFIED-RAIL TEST
ASTM D4028-1996(R02)：STANDARD SPECIFICATION FOR SOLAR SCREENING WOVEN
FROM VINYL-COATED FIBER GLASS YARN
ASTM D4029-2004：STANDARD SPECIFICATION FOR FINISHED WOVEN GLASS FABRICS
ASTM D4030-2004：STANDARD SPECIFICATION FOR GLASS FIBER CORD AND SEWING
THREAD
ASTM D4031-2001：STANDARD TEST METHOD FOR BULK PROPERTIES OF TEXTURED YARNS
ASTM D4032-1994(R01)：STANDARD TEST METHOD FOR STIFFNESS OF FABRIC BY THE
CIRCULAR BEND PROCEDURE
ASTM D4035-2002：STANDARD PERFORMANCE SPECIFICATION FOR KNITTED NECKTIE
AND SCARF FABRICS
ASTM D4037-2002：STANDARD PERFORMANCE SPECIFICATION FOR WOVEN, KNITTED,
OR FLOCKED BEDSPREAD FABRICS
ASTM D4039-1993(R04)：STANDARD TEST METHOD FOR REFLECTION HAZE OF HIGH-GLOSS
SURFACES
ASTM D4040-2005：STANDARD TEST METHOD FOR RHEOLOGICAL PROPERTIES OF PASTE
PRINTING AND VEHICLES BY THE FALLING-ROD VISCOMETER
ASTM D4041-2005：STANDARD PRACTICE FOR DETERMINING SPRAY PATTERNS OF MECHANICAL
PUMP DISPENSERS
ASTM D4042-1993(R03)(E)：TEST METHOD FOR SAMPLING AND TESTING FOR ASH AND
TOTAL IRON IN STEEL MILL DISPERSIONS OF ROLLING OILS
ASTM D4043-1996(E)：STANDARD GUIDE FOR SELECTION OF AQUIFER TEST METHOD
IN DETERMINING OF HYDRAULIC PROPERTIES BY WELL TECHNIQUES
ASTM D4044-1996(R02)：STANDARD TEST METHOD (FIELD PROCEDURE) FOR INSTANTANEOUS
CHANGE IN HEAD (SLUG) TESTS FOR DETERMINING HYDRAULIC PROPERTIES OF AQUIFIERS
ASTM D4045-2004：STANDARD TEST METHOD FOR SULFUR IN PETROLEUM PRODUCTS
BY HYDROGENOLYSIS AND RATEOMETRIC COLORIMETRY
ASTM D4046-1991(R05)：STANDARD TEST METHOD FOR ALKYL NITRATE IN DIESEL
FUELS BY SPECTROPHOTOMETRY
ASTM D4047-2000(R05)：STANDARD TEST METHOD FOR PHOSPHORUS IN LUBRICATING
OILS AND ADDITIVES BY QUINOLINE PHOSPHOMOLYBDATE METHOD - IP DESIGNATION:
149/93
ASTM D4048-2002：STANDARD TEST METHOD FOR DETECTION OF COPPER CORROSION
FROM LUBRICATING GREASE
ASTM D4049-1999(R04)：STANDARD TEST METHOD FOR DETERMINING THE RESISTANCE
OF LUBRICATING GREASE TO WATER SPRAY
ASTM D4050-1996(R02)：STANDARD TEST METHOD (FIELD PROCEDURE) FOR WITHDRAWAL
AND INJECTION WELL TESTS FOR DETERMINING HYDRAULIC PROPERTIES OF AQUIFER
SYSTEMS
ASTM D4051-1999(R04)：STANDARD PRACTICE FOR PREPARATION OF LOW-PRESSURE
GAS BLENDS
ASTM D4052-1996(R02)(E)：STANDARD TEST METHOD FOR DENSITY AND RELATIVE
DENSITY OF LIQUIDS BY DIGITAL DENSITY METER - X-6-NX-6-M IP DESIGNATION:
365/84(86)
ASTM D4053-2004：STANDARD TEST METHOD FOR BENZENE IN MOTOR AND AVIATION
GASOLINE BY INFRARED SPECTROSCOPY
ASTM D4054-1993(R03)：STANDARD PRACTICE FOR EVALUATING THE COMPATIBILITY
OF ADDITIVES WITH AVIATION-TURBINE FUELS AND AIRCRAFT FUEL SYSTEM MATERIALS
ASTM D4055-2004：STANDARD TEST METHOD FOR PENTANE INSOLUBLES BY MEMBRANE
FILTRATION
ASTM D4056-2001：STANDARD TEST METHOD FOR ESTIMATION OF SOLUBILITY OF WATER
IN HYDROCARBON AND ALIPHATIC ESTER LUBRICANTS
ASTM D4057-1995(R00)：STANDARD PRACTICE FOR MANUAL SAMPLING OF PETROLEUM
AND PETROLEUM PRODUCTS - IP DESIGNATION: IMPMS (CHAPTER 8.1)
ASTM D4058-1996(R06)：STANDARD TEST METHOD FOR ATTRITION AND ABRASION OF
CATALYSTS AND CATALYST CARRIERS
ASTM D4059-2000(R05)(E)：STANDARD TEST METHOD FOR ANALYSIS OF POLYCHLORINATED
BIPHENYLS IN INSULATING LIQUIDS BY GAS CHROMATOGRAPHY
ASTM D4060-2001：STANDARD TEST METHOD FOR ABRASION RESISTANCE OF ORGANIC
COATINGS BY THE TABER ABRASER
ASTM D4061-1994(R00)：STANDARD TEST METHOD FOR RETROREFLECTANCE OF HORIZONTAL
COATINGS
ASTM D4062-1999(R03)：STANDARD TEST METHOD FOR LEVELING OF PAINTS BY DRAW-DOWN
METHOD
ASTM D4063-1999(R04)：STANDARD SPECIFICATION FOR PRESSBOARD FOR ELECTRICAL
INSULATING PURPOSES
ASTM D4064-2001：STANDARD PRACTICE FOR PRESERVATIVE TREATMENT OF UTILITY
POLES BY THE THERMAL PROCESS
ASTM D4065-2001：STANDARD PRACTICE FOR PLASTICS: DYNAMIC MECHANICAL PROPERTIES:
DETERMINATION AND REPORT OF PROCEDURES
ASTM D4066-2001A：STANDARD CLASSIFICATION SYSTEM FOR NYLON INJECTION AND
EXTRUSION MATERIALS (PA)
ASTM D4067-2003：STANDARD CLASSIFICATION SYSTEM FOR REINFORCED AND FILLED
POLY(PHENYLENE SULFIDE) (PPS) INJECTION MOLDING AND EXTRUSION MATERIALS
USING ASTM METHODS
ASTM D4068-2001：STANDARD SPECIFICATION FOR CHLORINATED POLYETHYLENE (CPE)
SHEETING FOR CONCEALED WATER-CONTAINMENT MEMBRANE
ASTM D4069-1995(R03)：STANDARD SPECIFICATION FOR IMPREGNATED ACTIVATED
CARBON USED TO REMOVE GASEOUS RADIO-IODINES FROM GAS STREAMS
ASTM D4071-1984(R05)：STANDARD PRACTICE FOR USE OF PORTLAND CEMENT CONCRETE
BRIDGE DECK WATER BARRIER MEMBRANE SYSTEMS
ASTM D4072-1998(R03)(E)：STANDARD TEST METHOD FOR TOLUENE-INSOLUBLE (TI)
CONTENT OF TAR AND PITCH
ASTM D4073-1994(R03)：STANDARD TEST METHOD FOR TENSILE-TEAR STRENGTH OF
BITUMINOUS ROOFING MEMBRANES - E1
ASTM D4074-1991(R04)：STANDARD TEST METHOD FOR BITUMEN AND AGGREGATE CONTENT
OF BITUMEN-AGGREGATE MIXTURES FROM ROOFING SAMPLES
ASTM D4075-2002：STANDARD TEST METHODS FOR COMPOUNDING MATERIALS - FLAME
ATOMIC ABSORPTION TECHNIQUE - DETERMINATION OF METALS
ASTM D4077-2004：STANDARD SPECIFICATION FOR CUMENE (ISOPROPYLBENZENE)
ASTM D4078-2002：STANDARD SPECIFICATION FOR WATER EMULSION FLOOR POLISH
ASTM D4079-2000(R06)：STANDARD SPECIFICATION FOR VAPOR-DEGREASING GRADE
METHYLENE CHLORIDE
ASTM D4080-2000：STANDARD SPECIFICATION FOR TRICHLOROETHYLENE, TECHNICAL
AND VAPOR-DEGREASING GRADE
ASTM D4081-2000(R06)：STANDARD SPECIFICATION FOR DRYCLEANING-GRADE PERCHLOROETHYLENE
ASTM D4082-2002：STANDARD TEST METHOD FOR EFFECTS OF GAMMA RADIATION ON
COATINGS FOR USE IN LIGHT-WATER NUCLEAR POWER PLANTS
ASTM D4083-1989(R01)(E)：STANDARD PRACTICE FOR DESCRIPTION OF FROZEN SOILS
(VISUAL-MANUAL PROCEDURE)
ASTM D4084-2005：STANDARD TEST METHOD FOR ANALYSIS OF HYDROGEN SULFIDE
IN GASEOUS FUELS (LEAD ACETATE REACTION RATE METHOD)
ASTM D4085-1993(R03)：STANDARD TEST METHOD FOR METALS IN CELLULOSE BY ATOMIC
ABSORPTION SPECTROPHOTOMETRY
ASTM D4086-1992A(R03)：STANDARD PRACTICE FOR VISUAL EVALUATION OF METAMERISM
ASTM D409-2002：STANDARD TEST METHOD FOR GRINDABILITY OF COAL BY THE HARDGROVE-MACHINE
METHOD
ASTM D4092-2001：STANDARD TERMINOLOGY:PLASTICS: DYNAMIC MECHANICAL PROPERTIES
ASTM D4093-1995(R05)(E)：STANDARD TEST METHOD FOR PHOTOELASTIC MEASUREMENTS
OF BIREFRINGENCE AND RESIDUAL STRAINS IN TRANSPARENT OR TRANSLUCENT PLASTIC
MATERIALS
ASTM D4094-2000：STANDARD TEST METHOD FOR ACID CONTENT OF ETHYLENE-ACRYLIC
ACID COPOLYMERS
ASTM D4095-1997(R02)：STANDARD PRACTICE FOR USE OF THE REFRACTOMETER FOR
DETERMINING NONVOLATILE MATTER (TOTAL SOLIDS) IN FLOOR POLISHES
ASTM D4096-1991(R03)：STANDARD TEST METHOD FOR DETERMINATION OF TOTAL SUSPENDED
PARTICULATE MATTER IN THE ATMOSPHERE (HIGH-VOLUME SAMPLER METHOD)
ASTM D4097-2001：STANDARD SPECIFICATION FOR CONTACT-MOLDED GLASS-FIBER-REINFORCED
THERMOSET RESIN CORROSION-RESISTANT TANKS
ASTM D4101-2005A：STANDARD SPECIFICATION FOR POLYPROPYLENE INJECTION AND
EXTRUSION MATERIALS
ASTM D4102-1982(R04)：STANDARD TEST METHOD FOR THERMAL OXIDATIVE RESISTANCE
OF CARBON FIBERS
ASTM D4103-1990(R02)：STANDARD PRACTICE FOR PREPARATION OF SUBSTRATE SURFACES
FOR COEFFICIENT OF FRICTION TESTING
ASTM D4104-1996(R04)：STANDARD TEST METHOD (ANALYTICAL PROCEDURE) FOR DETERMINING
TRANSMISSIVITY OF NONLEAKY CONFINED AQUIFERS BY OVERDAMPED WELL RESPONSE
TO INSTANTANEOUS CHANGE IN HEAD (SLUG TESTS)
ASTM D4105-1996(R02)：STANDARD TEST METHOD (ANALYTICAL PROCEDURE) FOR DETERMINING
TRANSMISSIVITY AND STORAGE COEFFICIENT OF NONLEAKY CONFINED AQUIFERS BY
THE MODIFIED THEIS NONEQUILIBRIUM METHOD
ASTM D4106-1996(R02)：STANDARD TEST METHOD (ANALYTICAL PROCEDURE) FOR DETERMINING
TRANSMISSIVITY AND STORAGE COEFFICIENT OF NONLEAKY CONFINED AQUIFERS BY
THE THEIS NONEQUILIBRIUM METHOD
ASTM D4107-1998(R02)(E)：STANDARD TEST METHOD FOR TRITIUM IN DRINKING WATER
ASTM D4109-2002：STANDARD PERFORMANCE SPECIFICATION FOR MEN- AND BOYS-?WOVEN
COVERALL, DUNGAREE, OVERALL, AND SHOP-COAT FABRICS
ASTM D4110-2002：STANDARD PERFORMANCE SPECIFICATION FOR MEN- AND BOYS-?KNITTED
BATHROBE, DRESSING GOWN, AND PAJAMA FABRICS
ASTM D4111-2002：STANDARD PERFORMANCE SPECIFICATION FOR WOVEN NAPERY AND
TABLECLOTH FABRICS: HOUSEHOLD AND INSTITUTIONAL
ASTM D411-1998(R03)：STANDARD TEST METHODS FOR SHELLAC USED FOR ELECTRICAL
INSULATION
ASTM D4112-2002：STANDARD PERFORMANCE SPECIFICATION FOR WOVEN UMBRELLA
FABRICS
ASTM D4113-2002：STANDARD PERFORMANCE SPECIFICATION FOR WOVEN SLIPCOVER
FABRICS
ASTM D4114-2002：STANDARD PERFORMANCE SPECIFICATION FOR WOVEN FLAT LINING
FABRICS FOR WOMEN- AND GIRLS-?APPAREL
ASTM D4115-2002：STANDARD PERFORMANCE SPECIFICATION FOR WOMEN- AND GIRLS-?KNITTED
AND WOVEN DRESS GLOVE FABRICS
ASTM D4116-2001：STANDARD PERFORMANCE SPECIFICATION FOR WOMEN- AND GIRLS-?KNITTED
AND WOVEN CORSET-GIRDLE-COMBINATION FABRICS
ASTM D4117-2001：STANDARD PERFORMANCE SPECIFICATION FOR WOMEN- AND GIRLS-?WOVEN
ROBE, NEGLIGEE, NIGHTGOWN, PAJAMA, SLIP, AND LINGERIE FABRICS
ASTM D4118-2001：STANDARD PERFORMANCE SPECIFICATION FOR WOMEN- WOVEN COVERALL,
DUNGAREE, OVERALL, AND SHOP COAT FABRICS
ASTM D4119-2001：STANDARD PERFORMANCE SPECIFICATION FOR MEN- AND BOYS-?KNITTED
DRESS SHIRT FABRICS
ASTM D41-2005：STANDARD SPECIFICATION FOR ASPHALT PRIMER USED IN ROOFING,
DAMPPROOFING, AND WATERPROOFING - E-1; AASHTO NO.: M116
ASTM D4120-2001：STANDARD TEST METHOD FOR FIBER COHESION IN ROVING, SLIVER,
AND TOP IN DYNAMIC TESTS
ASTM D412-1998A(R02)(E)：STANDARD TEST METHODS FOR VULCANIZED RUBBER AND
THERMOPLASTIC ELASTOMERS TENSION
ASTM D4122-2005A：STANDARD PRACTICE FOR CARBON BLACKEVALUATION OF AN INDUSTRY
REFERENCE BLACK
ASTM D4124-2001：STANDARD TEST METHODS FOR SEPARATION OF ASPHALT INTO FOUR
FRACTIONS
ASTM D4125-2005：STANDARD TEST METHODS FOR ASPHALT CONTENT OF BITUMINOUS
MIXTURES BY THE NUCLEAR METHOD
ASTM D4126-2002：STANDARD SPECIFICATION FOR VAPOR-DEGREASING GRADE AND
GENERAL SOLVENT GRADE 1,1,1-TRICHLOROETHANE
ASTM D4127-2002：STANDARD TERMINOLOGY USED WITH ION-SELECTIVE ELECTRODES
ASTM D4128-2001：STANDARD GUIDE FOR IDENTIFICATION AND QUANTITATION OF
ORGANIC COMPOUNDS IN WATER BY COMBINED GAS CHROMATOGRAPHY AND ELECTRON
IMPACT MASS SPECTROMETRY
ASTM D4129-2005：STANDARD TEST METHOD FOR TOTAL AND ORGANIC CARBON IN WATER
BY HIGH TEMPERATURE OXIDATION AND BY COULOMETRIC DETECTION
ASTM D4130-2003：STANDARD TEST METHOD FOR SULFATE ION IN BRACKISH WATER,
SEAWATER, AND BRINES
ASTM D4131-1984(R05)：STANDARD PRACTICE FOR SAMPLING FISH WITH ROTENONE
ASTM D413-1998(R02)(E)：STANDARD TEST METHODS FOR RUBBER PROPERTYADHESION
TO FLEXIBLE SUBSTRATE
ASTM D4132-1982(R04)：STANDARD PRACTICE FOR SAMPLING PHYTOPLANKTON WITH
CONICAL TOW NETS
ASTM D4133-1982(R04)：STANDARD PRACTICE FOR SAMPLING PHYTOPLANKTON WITH
PUMPS
ASTM D4134-1982(R04)：STANDARD PRACTICE FOR SAMPLING PHYTOPLANKTON WITH
A CLARKE-BUMPUS PLANKTON SAMPLER
ASTM D4135-1982(R04)：STANDARD PRACTICE FOR SAMPLING PHYTOPLANKTON WITH
DEPTH-INTEGRATING SAMPLERS
ASTM D4136-1982(R04)：STANDARD PRACTICE FOR SAMPLING PHYTOPLANKTON WITH
WATER-SAMPLING BOTTLES
ASTM D4137-1982(R04)：STANDARD PRACTICE FOR PRESERVING PHYTOPLANKTON SAMPLES
ASTM D4138-1994(R01)(E)：STANDARD TEST METHODS FOR MEASUREMENT OF DRY FILM
THICKNESS OF PROTECTIVE COATING SYSTEMS BY DESTRUCTIVE MEANS
ASTM D4139-2004：STANDARD GUIDE FOR DETERMINING VOLATILE AND NONVOLATILE
CONTENT OF PIGMENTS
ASTM D4140-1982(R02)：STANDARD GUIDE FOR DETERMINING VOLATILE AND NONVOLATILE
CONTENT OF DRIERS, DRYING OILS, NAVAL STORES, AND SOLVENTS
ASTM D4141-2001：STANDARD PRACTICE FOR CONDUCTING BLACK BOX AND SOLAR CONCENTRATING
EXPOSURES OF COATINGS
ASTM D4142-1989(R01)：STANDARD GUIDE FOR TESTING EPOXY RESINS
ASTM D4143-1989(R01)：STANDARD GUIDE FOR TESTING LATEX VEHICLES
ASTM D4144-1994(R05)：STANDARD TEST METHOD FOR ESTIMATING PACKAGE STABILITY
OF COATINGS FOR ULTRAVIOLET CURING
ASTM D4145-1983(R02)：STANDARD TEST METHOD FOR COATING FLEXIBILITY OF PREPAINTED
SHEET
ASTM D4146-1996(R03)：STANDARD TEST METHOD FOR FORMABILITY OF ZINC-RICH
PRIMER/CHROMATE COMPLEX COATINGS ON STEEL
ASTM D4147-1999(R03)：STANDARD PRACTICE FOR APPLYING COIL COATINGS USING
THE WIRE-WOUND DRAWDOWN BAR
ASTM D4148-1982(R04)：STANDARD TEST METHOD FOR ANALYSIS OF PHYTOPLANKTON
IN SURFACE WATER BY THE SEDGWICK-RAFTER METHOD
ASTM D4149-1982(R04)：STANDARD CLASSIFICATION FOR SAMPLING PHYTOPLANKTON
IN SURFACE WATERS
ASTM D4150-2003：STANDARD TERMINOLOGY RELATING TO GASEOUS FUELS
ASTM D4151-1992(R01)：STANDARD TEST METHOD FOR FLAMMABILITY OF BLANKETS
ASTM D4153-2001：STANDARD PERFORMANCE SPECIFICATION FOR MEN-, WOMEN-,
AND CHILDREN- WOVEN HANDKERCHIEF FABRICS
ASTM D4154-2001：STANDARD PERFORMANCE SPECIFICATION FOR MEN- AND BOYS-?KNITTED
AND WOVEN BEACHWEAR AND SPORTS SHIRT FABRICS
ASTM D4155-2001：STANDARD PERFORMANCE SPECIFICATION FOR WOMEN- AND GIRLS-?WOVEN
SPORTSWEAR, SHORTS, SLACKS, AND SUITING FABRICS
ASTM D4156-2001：STANDARD PERFORMANCE SPECIFICATION FOR WOMEN- AND GIRLS-?KNITTED
SPORTSWEAR FABRICS
ASTM D4157-2002：STANDARD TEST METHOD FOR ABRASION RESISTANCE OF TEXTILE
FABRICS (OSCILLATORY CYLINDER METHOD) - (REINSTATED)
ASTM D4158-2001：STANDARD GUIDE FOR ABRASION RESISTANCE OF TEXTILE FABRICS
(UNIFORM ABRASION)
ASTM D4161-2001(R05)：STANDARD SPECIFICATION FOR G牵FIBERGLASSG钎 (GLASS-FIBER-REINFORCED
THERMOSETTING-RESIN) PIPE JOINTS USING FLEXIBLE ELASTOMERIC SEALS
ASTM D4164-2003：STANDARD TEST METHOD FOR MECHANICALLY TAPPED PACKING DENSITY
OF FORMED CATALYST AND CATALYST CARRIERS
ASTM D4165-2000：STANDARD TEST METHOD FOR CYANOGEN CHLORIDE IN WATER
ASTM D4166-1999(R04)(E)：STANDARD TEST METHOD FOR MEASUREMENT OF THICKNESS
OF NONMAGNETIC MATERIALS BY MEANS OF A DIGITAL MAGNETIC INTENSITY INSTRUMENT
ASTM D4167-1997(R02)：STANDARD SPECIFICATION FOR FIBER-REINFORCED PLASTIC
FANS AND BLOWERS
ASTM D4168-1995(R02)：STANDARD TEST METHODS FOR TRANSMITTED SHOCK CHARACTERISTICS
OF FOAM-IN-PLACE CUSHIONING MATERIALS
ASTM D4169-2005：STANDARD PRACTICE FOR PERFORMANCE TESTING OF SHIPPING
CONTAINERS AND SYSTEMS
ASTM D4170-1997(R02)(E)：STANDARD TEST METHOD FOR FRETTING WEAR PROTECTION
BY LUBRICATING GREASES
ASTM D4171-2003：STANDARD SPECIFICATION FOR FUEL SYSTEM ICING INHIBITORS
ASTM D4172-1994(R04)：STANDARD TEST METHOD FOR WEAR PREVENTIVE CHARACTERISTICS
OF LUBRICATING FLUID (FOUR-BALL METHOD)
ASTM D4174-1989(R05)：STANDARD PRACTICE FOR CLEANING, FLUSHING, AND PURIFICATION
OF PETROLEUM FLUID HYDRAULIC SYSTEMS
ASTM D4175-2005：STANDARD TERMINOLOGY RELATING TO PETROLEUM, PETROLEUM
PRODUCTS, AND LUBRICANTS
ASTM D4176-2004(E)：STANDARD TEST METHOD FOR FREE WATER AND PARTICULATE
CONTAMINATION IN DISTILLATE FUELS (VISUAL INSPECTION PROCEDURES)
ASTM D4177-1995(R00)：STANDARD PRACTICE FOR AUTOMATIC SAMPLING OF PETROLEUM
AND PETROLEUM PRODUCTS - IP DESIGNATION: MPMS CHAPTER 8.2
ASTM D4178-1982(R05)：STANDARD PRACTICE FOR CALIBRATING MOISTURE ANALYZERS
ASTM D4179-2001(R06)：STANDARD TEST METHOD FOR SINGLE PELLET CRUSH STRENGTH
OF FORMED CATALYST SHAPES
ASTM D4180-2003：STANDARD TEST METHOD FOR VIBRATORY PACKING DENSITY OF
FORMED CATALYST PARTICLES AND CATALYST CARRIERS
ASTM D4181-2000：STANDARD CLASSIFICATION FOR ACETAL (POM) MOLDING AND EXTRUSION
MATERIALS
ASTM D4182-1997(R04)：STANDARD PRACTICE FOR EVALUATION OF LABORATORIES
USING ASTM PROCEDURES IN THE SAMPLING AND ANALYSIS OF COAL AND COKE
ASTM D4185-1996(R01)(E)：STANDARD PRACTICE FOR MEASUREMENT OF METALS IN
WORKPLACE ATMOSPHERE BY FLAME ATOMIC ABSORPTION SPECTROPHOTOMETRY
ASTM D4186-1989(R98)(E)：STANDARD TEST METHOD FOR ONE-DIMENSIONAL CONSOLIDATION
PROPERTIES OF SOILS USING CONTROLLED-STRAIN LOADING
ASTM D4188-1982(R03)：STANDARD PRACTICE FOR PERFORMING PRESSURE IN-LINE
COAGULATION-FLOCCULATION-FILTRATION TEST
ASTM D4189-1995(R02)：STANDARD TEST METHOD FOR SILT DENSITY INDEX (SDI)
OF WATER
ASTM D4190-2003：STANDARD TEST METHOD FOR ELEMENTS IN WATER BY DIRECT-CURRENT
PLASMA ATOMIC EMISSION SPECTROSCOPY
ASTM D4191-2003：STANDARD TEST METHOD FOR SODIUM IN WATER BY ATOMIC ABSORPTION
SPECTROPHOTOMETRY
ASTM D4192-2003：STANDARD TEST METHOD FOR POTASSIUM IN WATER BY ATOMIC
ABSORPTION SPECTROPHOTOMETRY
ASTM D4193-2002：STANDARD TEST METHOD FOR THIOCYANATE IN WATER
ASTM D4194-2003：STANDARD TEST METHODS FOR OPERATING CHARACTERISTICS OF
REVERSE OSMOSIS AND NANOFILTRATION DEVICES
ASTM D4195-1988(R03)(E)：STANDARD GUIDE FOR WATER ANALYSIS FOR REVERSE
OSMOSIS APPLICATION
ASTM D4196-2005：STANDARD TEST METHOD FOR CONFIRMING THE STERILITY OF MEMBRANE
FILTERS
ASTM D4198-1982(R03)：STANDARD TEST METHODS FOR EVALUATING ABSORBENT PADS
USED WITH MEMBRANE FILTERS FOR BACTERIOLOGICAL ANALYSIS AND GROWTH
ASTM D4-1986(R98)：STANDARD TEST METHOD FOR BITUMEN CONTENT
ASTM D4199-1982(R03)：STANDARD TEST METHODS FOR AUTOCLAVABILITY OF MEMBRANE
FILTERS
ASTM D4200-1982(R03)：STANDARD TEST METHOD FOR EVALUATING INHIBITORY EFFECTS
OF INK GRIDS ON MEMBRANE FILTERS
ASTM D420-1998(R03)：STANDARD GUIDE TO SITE CHARACTERIZATION FOR ENGINEERING
DESIGN AND CONSTRUCTION PURPOSES
ASTM D4203-2000：STANDARD SPECIFICATION FOR STYRENE-ACRYLONITRILE (SAN)
INJECTION AND EXTRUSION MATERIALS
ASTM D4204-2000：STANDARD PRACTICE FOR PREPARING PLASTIC FILM SPECIMENS
FOR A ROUND-ROBIN STUDY
ASTM D4206-1996(R01)：STANDARD TEST METHOD FOR SUSTAINED BURNING OF LIQUID
MIXTURES USING THE SMALL SCALE OPEN-CUP APPARATUS
ASTM D4208-2002(E)：STANDARD TEST METHOD FOR TOTAL CHLORINE IN COAL BY
THE OXYGEN BOMB COMBUSTION/ION SELECTIVE ELECTRODE METHOD
ASTM D4209-1982(R02)：STANDARD PRACTICE FOR DETERMINING VOLATILE AND NONVOLATILE
CONTENT OF CELLULOSICS, EMULSIONS, RESIN SOLUTIONS, SHELLAC, AND VARNISHES
ASTM D4211-1982(R04)：CLASSIFICATION FOR FISH SAMPLING
ASTM D421-1985(R02)：STANDARD PRACTICE FOR DRY PREPARATION OF SOIL SAMPLES
FOR PARTICLE-SIZE ANALYSIS AND DETERMINATION OF SOIL CONSTANTS
ASTM D4212-1999(R05)：STANDARD TEST METHOD FOR VISCOSITY BY DIP-TYPE VISCOSITY
CUPS
ASTM D4213-1996(R03)：STANDARD TEST METHOD FOR SCRUB RESISTANCE OF PAINTS
BY ABRASION WEIGHT LOSS
ASTM D4214-1998：STANDARD TEST METHODS FOR EVALUATING THE DEGREE OF CHALKING
OF EXTERIOR PAINT FILMS
ASTM D4215-1996(R02)：STANDARD SPECIFICATION FOR COLD-MIXED, COLD-LAID
BITUMINOUS PAVING MIXTURES
ASTM D4216-2003：STANDARD SPECIFICATION FOR RIGID POLY(VINYL CHLORIDE)
(PVC) AND RELATED PVC AND CHLORINATED POLY(VINYL CHLORIDE) (CPVC) BUILDING
PRODUCTS COMPOUNDS
ASTM D4217-2002：STANDARD TEST METHOD FOR GEL TIME OF THERMOSETTING COATING
POWDER
ASTM D4218-1996(R01)：STANDARD TEST METHOD FOR DETERMINATION OF CARBON
BLACK CONTENT IN POLYETHYLENE COMPOUNDS BY THE MUFFLE-FURNACE TECHNIQUE
ASTM D4219-2002：STANDARD TEST METHOD FOR UNCONFINED COMPRESSIVE STRENGTH
INDEX OF CHEMICAL- GROUTED SOILS
ASTM D4220-1995(R00)：STANDARD PRACTICES FOR PRESERVING AND TRANSPORTING
SOIL SAMPLES
ASTM D4221-1999(R05)：STANDARD TEST METHOD FOR DISPERSIVE CHARACTERISTICS
OF CLAY SOIL BY DOUBLE HYDROMETER
ASTM D422-1963(R02)：STANDARD TEST METHOD FOR PARTICLE-SIZE ANALYSIS OF
SOILS
ASTM D4222-2003：STANDARD TEST METHOD FOR DETERMINATION OF NITROGEN ADSORPTION
AND DESORPTION ISOTHERMS OF CATALYSTS AND CATALYST CARRIERS BY STATIC
VOLUMETRIC MEASUREMENTS
ASTM D4223-1999：STANDARD PRACTICE FOR PREPARATION OF TEST SPECIMENS OF
ASPHALT-STABILIZED SOILS
ASTM D4225-2003：STANDARD SPECIFICATION FOR STYRENE-BUTADIENE SHEETING
ASTM D4226-2005：STANDARD TEST METHODS FOR IMPACT RESISTANCE OF RIGID POLY(VINYL
CHLORIDE) (PVC) BUILDING PRODUCTS
ASTM D4227-2005：STANDARD PRACTICE FOR QUALIFICATION OF COATING APPLICATORS
FOR APPLICATION OF COATINGS TO CONCRETE SURFACES
ASTM D4228-2005：STANDARD PRACTICE FOR QUALIFICATION OF COATING APPLICATORS
FOR APPLICATION OF COATINGS TO STEEL SURFACES
ASTM D4230-2002(E)：STANDARD TEST METHOD OF MEASURING HUMIDITY WITH COOLED-SURFACE
CONDENSATION (DEW-POINT) HYGROMETER
ASTM D4231-2001：STANDARD PRACTICE FOR EVALUATION OF LAUNDERABLE WOVEN
DRESS SHIRTS AND SPORTS SHIRTS
ASTM D4232-2001：STANDARD PERFORMANCE SPECIFICATION FOR MEN- AND WOMEN-
DRESS AND VOCATIONAL CAREER APPAREL FABRICS
ASTM D4233-2001：STANDARD PERFORMANCE SPECIFICATION FOR WOMEN- AND GIRLS-?KNITTED
AND WOVEN BRASSIERE FABRICS
ASTM D4234-2001：STANDARD PERFORMANCE SPECIFICATION FOR WOMEN- AND GIRLS-?KNITTED
ROBE, NEGLIGEE, NIGHTGOWN, PAJAMA, SLIP, AND LINGERIE FABRICS
ASTM D4235-2001：STANDARD PERFORMANCE SPECIFICATION FOR WOMEN- AND GIRLS-?KNITTED
BLOUSE AND DRESS FABRICS
ASTM D4236-1994(R05)：STANDARD PRACTICE FOR LABELING ART MATERIALS FOR
CHRONIC HEALTH HAZARDS
ASTM D4239-2005：STANDARD TEST METHODS FOR SULFUR IN THE ANALYSIS SAMPLE
OF COAL AND COKE USING HIGH- TEMPERATURE TUBE FURNACE COMBUSTION METHODS
ASTM D4241-1998(R03)：STANDARD PRACTICE FOR DESIGN OF GAS TURBINE GENERATOR
LUBRICATING OIL SYSTEMS
ASTM D4242-2002：STANDARD TEST METHOD FOR INCLINED PLATE FLOW FOR THERMOSETTING
COATING POWDERS
ASTM D4243-1999(R04)(E)：STANDARD TEST METHOD FOR MEASUREMENT OF AVERAGE
VISCOMETRIC DEGREE OF POLYMERIZATION OF NEW AND AGED ELECTRICAL PAPERS
AND BOARDS
ASTM D4244-1995(R01)：STANDARD SPECIFICATION FOR GENERAL-PURPOSE, HEAVY-DUTY,
AND EXTRA-HEAVY-DUTY ACRYLONITRILE-BUTADIENE/POLY(VINYL CHLORIDE) (NBR/PVC)
JACKETS FOR WIRE AND CABLE
ASTM D4245-2002：STANDARD SPECIFICATION FOR OZONE-RESISTANT THERMOPLASTIC
ELASTOMER INSULATION FOR WIRE AND CABLE, 90 DEGREES C DRY/75 DEGREES C
WET OPERATION
ASTM D4246-2002：STANDARD SPECIFICATION FOR OZONE-RESISTANT THERMOPLASTIC
ELASTOMER INSULATION FOR WIRE AND CABLE, 90 DEGREES C OPERATION
ASTM D4248-1998(R03)：STANDARD PRACTICE FOR DESIGN OF STEAM TURBINE GENERATOR
OIL SYSTEMS
ASTM D4249-1983(R05)：STANDARD TEST METHOD FOR ENUMERATION OF CANDIDA ALBICANS
IN WATER
ASTM D4250-1992(R03)：STANDARD TEST METHOD FOR WATER-HOLDING CAPACITY OF
BIBULOUS FIBROUS PRODUCTS
ASTM D4251-1989(R03)：STANDARD TEST METHOD FOR ACTIVE MATTER IN ANIONIC
SURFACTANTS BY POTENTIOMETRIC TITRATION
ASTM D425-1988(R01)：STANDARD TEST METHOD FOR CENTRIFUGE MOISTURE EQUIVALENT
OF SOILS
ASTM D4252-1989(R03)：STANDARD TEST METHODS FOR CHEMICAL ANALYSIS OF ALCOHOL
ETHOXYLATES AND ALKYLPHENOL ETHOXYLATES
ASTM D4253-2000：STANDARD TEST METHODS FOR MAXIMUM INDEX DENSITY AND UNIT
WEIGHT OF SOILS USING A VIBRATORY TABLE
ASTM D4254-2000：STANDARD TEST METHODS FOR MINIMUM INDEX DENSITY AND UNIT
WEIGHT OF SOILS AND CALCULATION OF RELATIVE DENSITY
ASTM D4255/D4255M-2001：STANDARD TEST METHOD FOR IN-PLANE SHEAR PROPERTIES
OF POLYMER MATRIX COMPOSITE MATERIALS BY THE RAIL SHEAR METHOD
ASTM D4258-2005：STANDARD PRACTICE FOR SURFACE CLEANING CONCRETE FOR COATING
ASTM D4259-1988(R99)：STANDARD PRACTICE FOR ABRADING CONCRETE
ASTM D4260-2005：STANDARD PRACTICE FOR LIQUID AND GELLED ACID ETCHING OF
CONCRETE
ASTM D4261-2005：STANDARD PRACTICE FOR SURFACE CLEANING CONCRETE MASONRY
UNITS FOR COATING
ASTM D4262-2005：STANDARD TEST METHOD FOR PH OF CHEMICALLY CLEANED OR ETCHED
CONCRETE SURFACES
ASTM D4263-1983(R05)：STANDARD TEST METHOD FOR INDICATING MOISTURE IN CONCRETE
BY THE PLASTIC SHEET METHOD
ASTM D4265-1998：STANDARD GUIDE FOR EVALUATING STAIN REMOVAL PERFORMANCE
IN HOME LAUNDERING
ASTM D4266-1996(R01)：STANDARD TEST METHODS FOR PRECOAT CAPACITY OF POWDERED
ION-EXCHANGE RESINS
ASTM D4267-1995(R01)：STANDARD SPECIFICATION FOR LABELS FOR SMALL-VOLUME
(100 ML OR LESS) PARENTERAL DRUG CONTAINERS
ASTM D4270-1995(R01)：STANDARD GUIDE FOR USING EXISTING PRACTICES IN DEVELOPING
AND WRITING TEST METHODS
ASTM D4271-1988(R01)：STANDARD PRACTICE FOR WRITING STATEMENTS ON SAMPLING
IN TEST METHODS FOR TEXTILES
ASTM D427-2004：STANDARD TEST METHOD FOR SHRINKAGE FACTORS OF SOILS BY
THE MERCURY METHOD
ASTM D4272-2003：STANDARD TEST METHOD FOR TOTAL ENERGY IMPACT OF PLASTIC
FILMS BY DART DROP
ASTM D4273-2005：STANDARD TEST METHOD FOR POLYURETHANE RAW MATERIALS: DETERMINATION
OF PRIMARY HYDROXYL CONTENT OF POLYETHER POLYOLS
ASTM D4274-2005：STANDARD TEST METHODS FOR TESTING POLYURETHANE RAW MATERIALS:
DETERMINATION OF HYDROXYL NUMBERS OF POLYOLS
ASTM D4275-2002：STANDARD TEST METHOD FOR DETERMINATION OF BUTYLATED HYDROXY
TOLUENE (BHT) IN POLYMERS OF ETHYLENE AND ETHYLENE VINYL ACETATE (EVA)
COPOLYMERS BY GAS CHROMATOGRAPHY
ASTM D4276-2002：STANDARD PRACTICE FOR CONFINED AREA ENTRY
ASTM D4277-1983(R98)：STANDARD GUIDE FOR TESTING AMINO RESINS
ASTM D4278-2002：STANDARD TEST METHOD FOR WET ASHING PROCEDURE FOR PREPARING
WOOD SAMPLES FOR INORGANIC CHEMICAL ANALYSIS
ASTM D4279-1995(R03)：STANDARD TEST METHODS FOR WATER VAPOR TRANSMISSION
OF SHIPPING CONTAINERSCONSTANT AND CYCLE METHODS
ASTM D4280-2004：STANDARD SPECIFICATION FOR EXTENDED LIFE TYPE, NONPLOWABLE,
RAISED RETROREFLECTIVE PAVEMENT MARKERS
ASTM D4281-1995(R05)(E)：STANDARD TEST METHOD FOR OIL AND GREASE (FLUOROCARBON
EXTRACTABLE SUBSTANCES) BY GRAVIMETRIC DETERMINATION
ASTM D4282-2002：STANDARD TEST METHOD FOR DETERMINATION OF FREE CYANIDE
IN WATER AND WASTEWATER BY MICRODIFFUSION
ASTM D4283-1998(R04)：STANDARD TEST METHOD FOR VISCOSITY OF SILICONE FLUIDS
ASTM D4284-2003：STANDARD TEST METHOD FOR DETERMINING PORE VOLUME DISTRIBUTION
OF CATALYSTS BY MERCURY INTRUSION POROSIMETRY - (REINSTATED)
ASTM D4285-1983(R99)：STANDARD TEST METHOD FOR INDICATING OIL OR WATER
IN COMPRESSED AIR
ASTM D4286-1990(R99)：STANDARD PRACTICE FOR DETERMINING COATING CONTRACTOR
QUALIFICATIONS FOR NUCLEAR POWERED ELECTRIC GENERATION FACILITIES
ASTM D4287-2000(R05)：STANDARD TEST METHOD FOR HIGH-SHEAR VISCOSITY USING
A CONE/PLATE VISCOMETER
ASTM D4288-2002：STANDARD SPECIFICATION FOR CALCIUM BOROSILICATE PIGMENTS
ASTM D4289-2003：STANDARD TEST METHOD FOR ELASTOMER COMPATIBILITY OF LUBRICATING
GREASES AND FLUIDS
ASTM D4290-2002：STANDARD TEST METHOD FOR DETERMINING THE LEAKAGE TENDENCIES
OF AUTOMOTIVE WHEEL BEARING GREASE UNDER ACCELERATED CONDITIONS
ASTM D4291-2004：STANDARD TEST METHOD FOR TRACE ETHYLENE GLYCOL IN USED
ENGINE OIL
ASTM D429-2003(E)：STANDARD TEST METHODS FOR RUBBER PROPERTY-ADHESION TO
RIGID SUBSTRATES
ASTM D4292-1992(R02)(E)：STANDARD TEST METHOD FOR DETERMINATION OF VIBRATED
BULK DENSITY OF CALCINED PETROLEUM COKE
ASTM D4293-1983(R03)：STANDARD SPECIFICATION FOR PHOSPHATE ESTER BASED
FLUIDS FOR TURBINE LUBRICATION
ASTM D4294-2003：STANDARD TEST METHOD FOR SULFUR IN PETROLEUM AND PETROLEUM
PRODUCTS BY ENERGY-DISPERSIVE X-RAY FLUORESCENCE SPECTROMETRY
ASTM D4295-1989(R05)：STANDARD CLASSIFICATION FOR RUBBER COMPOUNDING MATERIALSZINC
OXIDE
ASTM D4296-1983(R04)：STANDARD PRACTICE FOR SAMPLING PITCH
ASTM D4297-2005：STANDARD PRACTICE FOR SAMPLING AND HANDLING BISPHENOL
A (4,4'-ISOPROPYLIDINEDIPHENOL)
ASTM D4298-2004：STANDARD GUIDE FOR INTERCOMPARING PERMEATION TUBES TO
ESTABLISH TRACEABILITY
ASTM D4300-2001：STANDARD TEST METHODS FOR ABILITY OF ADHESIVE FILMS TO
SUPPORT OR RESIST THE GROWTH OF FUNGI
ASTM D4301-2005：STANDARD TEST METHOD FOR TOTAL CHLORINE IN EPOXY RESINS
AND COMPOUNDS - REINSTATED
ASTM D430-1995(R00)：STANDARD TEST METHODS FOR RUBBER DETERIORATION - DYNAMIC
FATIGUE
ASTM D4302-2005：STANDARD SPECIFICATION FOR ARTISTS' OIL, RESIN-OIL,
AND ALKYD PAINTS
ASTM D4303-2003：STANDARD TEST METHODS FOR LIGHTFASTNESS OF COLORANTS USED
IN ARTISTS MATERIALS
ASTM D4304-2000：STANDARD SPECIFICATION FOR MINERAL LUBRICATING OIL USED
IN STEAM OR GAS TURBINES
ASTM D4305-1998A(R04)(E)：STANDARD TEST METHOD FOR FILTER FLOW OF AVIATION
FUELS AT LOW TEMPERATURES
ASTM D4306-2001：STANDARD PRACTICE FOR AVIATION FUEL SAMPLE CONTAINERS
FOR TESTS AFFECTED BY TRACE CONTAMINATION
ASTM D4307-1999(R04)：STANDARD PRACTICE FOR PREPARATION OF LIQUID BLENDS
FOR USE AS ANALYTICAL STANDARDS
ASTM D4308-1995(R05)：STANDARD TEST METHOD FOR ELECTRICAL CONDUCTIVITY
OF LIQUID HYDROCARBONS BY PRECISION METER
ASTM D4309-2002：STANDARD PRACTICE FOR SAMPLE DIGESTION USING CLOSED VESSEL
MICROWAVE HEATING TECHNIQUE FOR THE DETERMINATION OF TOTAL METALS IN WATER
ASTM D4310-2003：STANDARD TEST METHOD FOR DETERMINATION OF THE SLUDGING
AND CORROSION TENDENCIES OF INHIBITED MINERAL OILS
ASTM D4311-2004：STANDARD PRACTICE FOR DETERMINING ASPHALT VOLUME CORRECTION
TO A BASE TEMPERATURE
ASTM D4312-1995A(R05)：STANDARD TEST METHOD FOR TOLUENE-INSOLUBLE (TI)
CONTENT OF TAR AND PITCH (SHORT METHOD)
ASTM D4313-2003：STANDARD SPECIFICATION FOR GENERAL-PURPOSE, HEAVY-DUTY,
AND EXTRA-HEAVY-DUTY CROSSLINKED CHLORINATED POLYETHYLENE (CM) JACKETS
FOR WIRE AND CABLE
ASTM D4314-2005：STANDARD SPECIFICATION FOR GENERAL-PURPOSE, HEAVY-DUTY,
AND EXTRA-HEAVY-DUTY CROSSLINKED CHLOROSULFONATED POLYETHYLENE (CSM) JACKETS
FOR WIRE AND CABLE
ASTM D4315-1994(R01)：STANDARD TEST METHODS FOR RUBBER COMPOUNDING MATERIAL
- ZINC OXIDE
ASTM D4316-1995(R05)：STANDARD SPECIFICATION FOR ELASTOMERIC WATER BOTTLES
ASTM D4317-1998(R04)：STANDARD SPECIFICATION FOR POLYVINYL ACETATE-BASED
EMULSION ADHESIVES
ASTM D4318-2005：STANDARD TEST METHODS FOR LIQUID LIMIT, PLASTIC LIMIT,
AND PLASTICITY INDEX OF SOILS
ASTM D4319-1993(R01)：STANDARD TEST METHOD FOR DISTRIBUTION RATIOS BY THE
SHORT-TERM BATCH METHOD
ASTM D43-2000：STANDARD SPECIFICATION FOR COAL TAR PRIMER USED IN ROOFING,
DAMPPROOFING,AND WATERPROOFING - AASHTO NO.: M121
ASTM D4320-2004：STANDARD PRACTICE FOR LABORATORY PREPARATION OF CHEMICALLY
GROUTED SOIL SPECIMENS FOR OBTAINING DESIGN STRENGTH PARAMETERS
ASTM D4321-2004：STANDARD TEST METHOD FOR PACKAGE YIELD OF PLASTIC FILM
ASTM D4322-1996(R01)(E)：STANDARD TEST METHOD FOR RESIDUAL ACRYLONITRILE
MONOMER STYRENE-ACRYLONITRILE COPOLYMERS AND NITRILE RUBBER BY HEADSPACE
GAS CHROMATOGRAPHY
ASTM D4323-1984(R03)：STANDARD TEST METHOD FOR HYDROGEN SULFIDE IN THE
ATMOSPHERE BY RATE OF CHANGE OF REFLECTANCE
ASTM D4325-2002：STANDARD TEST METHODS FOR NONMETALLIC SEMI-CONDUCTING
AND ELECTRICALLY INSULATING RUBBER TAPES
ASTM D4326-2004：STANDARD TEST METHOD FOR MAJOR AND MINOR ELEMENTS IN COAL
AND COKE ASH BY X-RAY FLUORESCENCE
ASTM D4327-2003：STANDARD TEST METHOD FOR ANIONS IN WATER BY CHEMICALLY
SUPPRESSED ION CHROMATOGRAPHY
ASTM D4328-2003：STANDARD PRACTICE FOR CALCULATION OF SUPERSATURATION OF
BARIUM SULFATE, STRONTIUM SULFATE, AND CALCIUM SULFATE DIHYDRATE (GYPSUM)
IN BRACKISH WATER, SEAWATER, AND BRINES
ASTM D4329-2005：STANDARD PRACTICE FOR FLUORESCENT UV EXPOSURE OF PLASTICS
ASTM D4330-1994(R02)：STANDARD PRACTICE FOR EVALUATION OF FIBERGLASS BOAT
POLISH AND WAX
ASTM D4332-2001(E)：STANDARD PRACTICE FOR CONDITIONING CONTAINERS, PACKAGES,
OR PACKAGING COMPONENTS FOR TESTING
ASTM D4333-2005：STANDARD TEST METHOD FOR THE COMPATIBILITY OF MECHANICAL
PUMP DISPENSER COMPONENTS
ASTM D4334-2005：STANDARD TEST METHOD FOR THE DETERMINATION OF THE DIP
TUBE RETENTION OF A MECHANICAL PUMP DISPENSER
ASTM D4335-1999：STANDARD TEST METHOD FOR THE DETERMINATION OF THE COMPONENT
RETENTION OF A MECHANICAL PUMP DISPENSER
ASTM D4336-2005：STANDARD TEST METHODS FOR DETERMINATION OF THE OUTPUT
PER STROKE OF A MECHANICAL PUMP DISPENSER
ASTM D4337-1989(R03)：STANDARD TEST METHODS FOR ANALYSIS OF LINEAR DETERGENT
ALKYLATES
ASTM D4338-1997(R04)：STANDARD TEST METHOD FOR FLEXIBILITY DETERMINATION
OF SUPPORTED ADHESIVE FILMS BY MANDREL BEND
ASTM D4339-2001：STANDARD TEST METHOD FOR DETERMINATION OF THE ODOR OF
ADHESIVES
ASTM D4340-1996(R01)：STANDARD TEST METHOD FOR CORROSION OF CAST ALUMINUM
ALLOYS IN ENGINE COOLANTS UNDER HEAT-REJECTING CONDITIONS
ASTM D4341-2003：STANDARD TEST METHOD FOR CREEP OF HARD ROCK CORE SPECIMENS
IN UNIAXIAL COMPRESSION
ASTM D4349-1996(R04)：CLASSIFICATION SYSTEM FOR POLYPHENYLENE ETHER (PPE)
MATERIALS
ASTM D4350-2000(R05)：STANDARD TEST METHOD FOR CORROSIVITY INDEX OF PLASTICS
AND FILLERS
ASTM D4354-1999(R04)：STANDARD PRACTICE FOR SAMPLING OF GEOSYNTHETICS FOR
TESTING
ASTM D4355-2005：STANDARD TEST METHOD FOR DETERIORATION OF GEOTEXTILES
BY EXPOSURE TO LIGHT, MOISTURE AND HEAT IN A XENON ARC TYPE APPARATUS
ASTM D4356-1984(R02)：STANDARD PRACTICE FOR ESTABLISHING CONSISTENT TEST
METHOD TOLERANCES
ASTM D4359-1990(R00)(E)：STANDARD TEST METHOD FOR DETERMINING WHETHER A
MATERIAL IS A LIQUID OR A SOLID
ASTM D4360-2003：STANDARD SPECIFICATION FOR METHYL N-AMYL KETONE
ASTM D4361-1997(R02)：STANDARD TEST METHOD FOR APPARENT TACK OF PRINTING
INKS AND VEHICLES BY A THREE-ROLLER TACKMETER
ASTM D4362-1993(R03)：STANDARD SPECIFICATION FOR PROPANE THERMOPHYSICAL
PROPERTY TABLES
ASTM D4363-1998(R03)：STANDARD SPECIFICATION FOR THERMOPLASTIC CHLORINATED
POLYETHYLENE (CM) JACKET FOR WIRE AND CABLE
ASTM D4364-2005：STANDARD PRACTICE FOR PERFORMING OUTDOOR ACCELERATED WEATHERING
TESTS OF PLASTICS USING CONCENTRATED SUNLIGHT
ASTM D4365-1995(R01)：STANDARD TEST METHOD FOR DETERMINING MICROPORE VOLUME
AND ZEOLITE AREA OF A CATALYST
ASTM D4367-2002：STANDARD TEST METHOD FOR BENZENE IN HYDROCARBON SOLVENTS
BY GAS CHROMATOGRAPHY
ASTM D4370-2001：STANDARD TEST METHODS FOR ACID AND BASE MILLIEQUIVALENT
CONTENT OF ELECTROCOAT BATH
ASTM D4371-1991(R98)：STANDARD TEST METHOD FOR DETERMINING THE WASHABILITY
CHARACTERISTICS OF COAL
ASTM D4373-2002：STANDARD TEST METHOD FOR RAPID DETERMINATION OF CARBONATE
CONTENT OF SOILS
ASTM D4374-2000：STANDARD TEST METHODS FOR CYANIDES IN WATER - AUTOMATED
METHODS FOR TOTAL CYANIDE, ACID DISSOCIABLE CYANIDE, AND THIOCYANATE
ASTM D4375-1996(R01)：STANDARD PRACTICE FOR BASIC STATISTICS IN COMMITTEE
D19 ON WATER
ASTM D4376-2002：STANDARD SPECIFICATION FOR VAPOR-DEGREASING GRADE PERCHLOROETHYLENE
ASTM D4377-2000(E)：STANDARD TEST METHOD FOR WATER IN CRUDE OILS BY POTENTIOMETRIC
KARL FISCHER TITRATION - API DESIGNATION: MPMS CHAPTER 10.7; IP DESIGNATION:
356/99
ASTM D4378-2003：STANDARD PRACTICE FOR IN-SERVICE MONITORING OF MINERAL
TURBINE OILS FOR STEAM AND GAS TURBINES
ASTM D4380-1984(R06)：STANDARD TEST METHOD FOR DENSITY OF BENTONITIC SLURRIES
ASTM D4381-1984(R06)：STANDARD TEST METHOD FOR SAND CONTENT BY VOLUME OF
BENTONITIC SLURRIES
ASTM D4382-2002：STANDARD TEST METHOD FOR BARIUM IN WATER, ATOMIC ABSORPTION
SPECTROPHOTOMETRY, GRAPHITE FURNACE
ASTM D4383-2005(E)：STANDARD SPECIFICATION FOR PLOWABLE, RAISED RETROREFLECTIVE
PAVEMENT MARKERS
ASTM D4385-2002：STANDARD PRACTICE FOR CLASSIFYING VISUAL DEFECTS IN THERMOSETTING
REINFORCED PLASTIC PULTRUDED PRODUCTS
ASTM D4386-1995(R02)：STANDARD PRACTICE FOR APPLICATION OF FLOOR POLISHES
TO MAINTAIN MULTILAYER COMPOSITE TILE OR FLOORING
ASTM D4388-2002：STANDARD SPECIFICATION FOR NONMETALLIC SEMI-CONDUCTING
AND ELECTRICALLY INSULATING RUBBER TAPES
ASTM D4389-2004：STANDARD SPECIFICATION FOR FINISHED GLASS FABRICS WOVEN
FROM ROVINGS
ASTM D4391-1993A(R00)：STANDARD TERMINOLOGY RELATING TO THE BURNING BEHAVIOR
OF TEXTILES
ASTM D4393-2004：STANDARD TEST METHOD FOR STRAP PEEL ADHESION OF REINFORCING
CORDS OR FABRICS TO RUBBER COMPOUNDS
ASTM D4394-2004：STANDARD TEST METHOD FOR DETERMINING THE IN SITU MODULUS
OF DEFORMATION OF ROCK MASS USING THE RIGID PLATE LOADING METHOD
ASTM D4395-2004：STANDARD TEST METHOD FOR DETERMINING THE IN SITU MODULUS
OF DEFORMATION OF ROCK MASS USING THE FLEXIBLE PLATE LOADING METHOD
ASTM D4396-1999(E)：STANDARD SPECIFICATION FOR RIGID POLY(VINYL CHLORIDE)
(PVC) AND CHLORINATED POLY(VINYL CHLORIDE) (CPVC) COMPOUNDS FOR PLASTIC
PIPE AND FITTINGS USED IN NONPRESSURE APPLICATIONS
ASTM D4397-2002：STANDARD SPECIFICATION FOR POLYETHYLENE SHEETING FOR CONSTRUCTION,
INDUSTRIAL, AND AGRICULTURAL APPLICATIONS
ASTM D4398-2002：STANDARD TEST METHOD FOR DETERMINING THE CHEMICAL RESISTANCE
OF FIBERGLASS-REINFORCED THERMOSETTING RESINS BY ONE-SIDE PANEL EXPOSURE
ASTM D4399-2005：STANDARD TEST METHOD FOR MEASURING ELECTRICAL CONDUCTIVITY
OF ELECTROCOAT BATHS
ASTM D4400-1999：STANDARD TEST METHOD FOR SAG RESISTANCE OF PAINTS USING
A MULTINOTCH APPLICATOR
ASTM D440-1986(R02)：STANDARD TEST METHOD OF DROP SHATTER TEST FOR COAL
ASTM D4402-2002：STANDARD TEST METHOD FOR VISCOSITY DETERMINATION OF ASPHALT
AT ELEVATED TEMPERATURES USING A ROTATIONAL VISCOMETER
ASTM D4403-1984(R00)(E)：STANDARD PRACTICE FOR EXTENSOMETERS USED IN ROCK
ASTM D4404-1984(R04)：STANDARD TEST METHOD FOR DETERMINATION OF PORE VOLUME
AND PORE VOLUME DISTRIBUTION OF SOIL AND ROCK BY MERCURY INTRUSION POROSIMETRY
ASTM D4405-2004：STANDARD TEST METHOD FOR CREEP OF SOFT ROCK CORE SPECIMENS
IN UNIAXIAL COMPRESSION AT AMBIENT OR ELEVATED TEMPERATURE
ASTM D4406-2004：STANDARD TEST METHOD FOR CREEP OF ROCK CORE SPECIMENS
IN TRIAXIAL COMPRESSION AT AMBIENT OR ELEVATED TEMPERTURES
ASTM D4409-1995(R03)：STANDARD TEST METHOD FOR VELOCITY MEASUREMENTS OF
WATER IN OPEN CHANNELS WITH ROTATING ELEMENT CURRENT METERS
ASTM D4410-2003：TERMINOLOGY FOR FLUVIAL SEDIMENT
ASTM D4411-2003：STANDARD GUIDE FOR SAMPLING FLUVIAL SEDIMENT IN MOTION
ASTM D441-1986(R02)：STANDARD TEST METHOD OF TUMBLER TEST FOR COAL
ASTM D4412-1984(R02)：STANDARD TEST METHODS FOR SULFATE-REDUCING BACTERIA
IN WATER AND WATER-FORMED DEPOSITS
ASTM D4413-1998(R03)：STANDARD TEST METHOD FOR DETERMINATION OF ETHYLENE
OXIDE IN WORKPLACE ATMOSPHERES (CHARCOAL TUBE METHODOLOGY)
ASTM D4414-1995(R01)：STANDARD PRACTICE FOR MEASUREMENT OF WET FILM THICKNESS
BY NOTCH GAGES
ASTM D4415-2005：STANDARD TEST METHODS FOR DETERMINATION OF DIMER IN ACRYLIC
ACID
ASTM D4416-2004：STANDARD SPECIFICATION FOR ACRYLIC ACID
ASTM D4417-2003：STANDARD TEST METHODS FOR FIELD MEASUREMENT OF SURFACE
PROFILE OF BLAST CLEANED STEEL
ASTM D4418-2000：STANDARD PRACTICE FOR RECEIPT, STORAGE, AND HANDLING OF
FUELS FOR GAS TURBINES
ASTM D4419-1990(R05)：STANDARD TEST METHOD FOR MEASUREMENT OF TRANSITION
TEMPERATURES OF PETROLEUM WAXES BY DIFFERENTIAL SCANNING CALORIMETRY (DSC)
ASTM D4422-2003：STANDARD TEST METHOD FOR ASH IN ANALYSIS OF PETROLEUM
COKE
ASTM D4423-2000：STANDARD TEST METHOD FOR DETERMINATION OF CARBONYLS IN
C4 HYDROCARBONS
ASTM D4424-1990(R01)(E)：STANDARD TEST METHOD FOR BUTYLENE ANALYSIS BY
GAS CHROMATOGRAPHY
ASTM D4425-1997(R02)：STANDARD TEST METHOD FOR OIL SEPARATION FROM LUBRICATING
GREASE BY CENTRIFUGING (KOPPERS METHOD)
ASTM D4426-2001：STANDARD TEST METHOD FOR DETERMINATION OF PERCENT NONVOLATILE
CONTENT OF LIQUID PHENOLIC RESINS USED FOR WOOD LAMINATING
ASTM D4427-1992(R02)(E)：STANDARD CLASSIFICATION OF PEAT SAMPLES BY LABORATORY
TESTING
ASTM D4428/D4428M-2000：STANDARD TEST METHODS FOR CROSSHOLE SEISMIC TESTING
ASTM D4429-2004：STANDARD TEST METHOD FOR CBR (CALIFORNIA BEARING RATIO)
OF SOILS IN PLACE - (REINSTATED)
ASTM D4430-2000(E)：STANDARD PRACTICE FOR DETERMINING THE OPERATIONAL COMPARABILITY
OF METEOROLOGICAL MEASUREMENTS
ASTM D4434-2004：STANDARD SPECIFICATION FOR POLY(VINYL CHLORIDE) SHEET
ROOFING
ASTM D4435-2004：STANDARD TEST METHOD FOR ROCK BOLT ANCHOR PULL TEST
ASTM D4436-2004：STANDARD TEST METHOD FOR ROCK BOLT LONG-TERM LOAD RETENTION
TEST
ASTM D4437-1999：STANDARD PRACTICE FOR DETERMINING THE INTEGRITY OF FIELD
SEAMS USED IN JOINING FLEXIBLE POLYMERIC SHEET GEOMEMBRANES
ASTM D4438-1985(R01)(E)：STANDARD TEST METHOD FOR PARTICLE SIZE DISTRIBUTION
OF CATALYTIC MATERIAL BY ELECTRONIC COUNTING
ASTM D4439-2004：STANDARD TERMINOLOGY FOR GEOSYNTHETICS
ASTM D4440-2001：STANDARD PRACTICE FOR RHEOLOGICAL MEASUREMENT OF POLYMER
MELTS USING DYNAMIC MECHANICAL PROCEDURES
ASTM D4441-2004：STANDARD SPECIFICATION FOR AQUEOUS DISPERSIONS OF POLYTETRAFLUOROETHYLENE
ASTM D444-1988(R03)：STANDARD TEST METHODS FOR CHEMICAL ANALYSIS OF ZINC
YELLOW PIGMENT (ZINC CHROMATE YELLOW)
ASTM D4442-1992(R03)：STANDARD TEST METHODS FOR DIRECT MOISTURE CONTENT
MEASUREMENT OF WOOD AND WOOD-BASE MATERIALS
ASTM D4443-1995(R02)：STANDARD TEST METHOD FOR DETERMINING RESIDUAL VINYL
CHLORIDE MONOMER CONTENT IN PPB RANGE IN VINYL CHLORIDE HOMO- AND CO-POLYMERS
BY HEADSPACE GAS CHROMATOGRAPHY
ASTM D4444-1992(R03)(E)：STANDARD TEST METHODS FOR USE AND CALIBRATION
OF HAND-HELD MOISTURE METERS
ASTM D4445-2003：STANDARD TEST METHOD FOR FUNGICIDES FOR CONTROLLING SAPSTAIN
AND MOLD ON UNSEASONED LUMBER (LABORATORY METHOD)
ASTM D4446-2005：STANDARD TEST METHOD FOR ANTI-SWELLING EFFECTIVENESS OF
WATER-REPELLENT FORMULATIONS AND DIFFERENTIAL SWELLING OF UNTREATED WOOD
WHEN EXPOSED TO LIQUID WATER ENVIRONMENTS
ASTM D4447-1984(R03)：STANDARD GUIDE FOR DISPOSAL OF LABORATORY CHEMICALS
AND SAMPLES
ASTM D4448-2001：STANDARD GUIDE FOR SAMPLING GROUND-WATER MONITORING WELLS
ASTM D4449-1990(R04)：STANDARD TEST METHOD FOR VISUAL EVALUATION OF GLOSS
DIFFERENCES BETWEEN SURFACES OF SIMILAR APPEARANCE
ASTM D4450-1985(R02)：STANDARD TEST METHOD FOR ANALYSIS OF ZINC HYDROXY
PHOSPHITE PIGMENT
ASTM D4451-2002：STANDARD TEST METHOD FOR PIGMENT CONTENT OF PAINTS BY
LOW-TEMPERATURE ASHING
ASTM D445-2004(E)：STANDARD TEST METHOD FOR KINEMATIC VISCOSITY OF TRANSPARENT
AND OPAQUE LIQUIDS (AND THE CALCULATION OF DYNAMIC VISCOSITY) - IP DESIGNATION:
71/1/97; BRITISH STANDARD 2000: PART 71:1990
ASTM D4452-1985(R02)(E)：STANDARD METHODS FOR X-RAY RADIOGRAPHY OF SOIL
SAMPLES
ASTM D4453-2002：STANDARD PRACTICE FOR HANDLING OF ULTRA-PURE WATER SAMPLES
ASTM D4454-1985(R02)：STANDARD TEST METHOD FOR SIMULTANEOUS ENUMERATION
OF TOTAL AND RESPIRING BACTERIA IN AQUATIC SYSTEMS BY MICROSCOPY
ASTM D4455-1985(R02)：STANDARD TEST METHOD FOR ENUMERATION OF AQUATIC BACTERIA
BY EPIFLUORESCENCE MICROSCOPY COUNTING PROCEDURE
ASTM D4456-1999(R05)：STANDARD TEST METHODS FOR PHYSICAL AND CHEMICAL PROPERTIES
OF POWDERED ION EXCHANGE RESINS
ASTM D4457-2002：STANDARD TEST METHOD FOR DETERMINATION OF DICHLOROMETHANE
AND 1,1,1-TRICHLOROETHANE IN PAINTS AND COATINGS BY DIRECT INJECTION INTO
A GAS CHROMATOGRAPH
ASTM D4458-2005：STANDARD TEST METHOD FOR CHLORIDE IONS IN BRACKISH WATER,
SEAWATER, AND BRINES
ASTM D4459-1999：STANDARD PRACTICE FOR XENON-ARC EXPOSURE OF PLASTICS INTENDED
FOR INDOOR APPLICATIONS
ASTM D4460-1997(R05)：STANDARD PRACTICE FOR CALCULATING PRECISION LIMITS
WHERE VALUES ARE CALCULATED FROM OTHER TEST METHODS
ASTM D446-2004：STANDARD SPECIFICATIONS AND OPERATING INSTRUCTIONS FOR
GLASS CAPILLARY KINEMATIC VISCOMETERS - IP DESIGNATION: 71/2/95
ASTM D4462-2002：STANDARD SPECIFICATION FOR ZINC HYDROXY PHOSPHITE PIGMENT
ASTM D4463-1996(R01)：STANDARD GUIDE FOR METALS FREE STEAM DEACTIVATION
OF FRESH FLUID CRACKING CATALYSTS
ASTM D4464-2000(R05)：STANDARD TEST METHOD FOR PARTICLE SIZE DISTRIBUTION
OF CATALYTIC MATERIAL BY LASER LIGHT SCATTERING
ASTM D4465-2005：STANDARD PERFORMANCE SPECIFICATION FOR ZIPPERS FOR DENIM
DUNGAREES
ASTM D4466-2002：STANDARD TERMINOLOGY FOR MULTICOMPONENT TEXTILE FIBERS
ASTM D4467-1994(R01)：STANDARD PRACTICE FOR INTERLABORATORY TESTING OF
A TEXTILE TEST METHOD THAT PRODUCES NON-NORMALLY DISTRIBUTED DATA
ASTM D4468-1985(R00)：STANDARD TEST METHOD FOR TOTAL SULFUR IN GASEOUS
FUELS BY HYDROGENOLYSIS AND RATEOMETRIC COLORIMETRY
ASTM D4469-2001：STANDARD PRACTICE FOR CALCULATING PERCENT ASPHALT ABSORPTION
BY THE AGGREGATE IN AN ASPHALT PAVEMENT MIXTURE
ASTM D4470-1997(R04)：STANDARD TEST METHOD FOR STATIC ELECTRIFICATION
ASTM D4471-2000(R04)：STANDARD TEST METHOD FOR PYRIDINE BASES IN CRESYLIC
ACID BY DIRECT TITRATION
ASTM D4472-1989(R03)：STANDARD GUIDE FOR RECORDKEEPING FOR REVERSE OSMOSIS
SYSTEMS
ASTM D4473-2003：STANDARD TEST METHOD FOR PLASTICS: DYNAMIC MECHANICAL
PROPERTIES: CURE BEHAVIOR
ASTM D4474-2000：STANDARD CLASSIFICATION SYSTEM FOR STYRENIC THERMOPLASTIC
ELASTOMER INJECTION MOLDING AND EXTRUSION MATERIALS (TES)
ASTM D4475-2002：STANDARD TEST METHOD FOR APPARENT HORIZONTAL SHEAR STRENGTH
OF PULTRUDED REINFORCED PLASTIC RODS BY THE SHORT-BEAM METHOD
ASTM D4476-2003：STANDARD TEST METHOD FOR FLEXURAL PROPERTIES OF FIBER
REINFORCED PULTRUDED PLASTIC RODS
ASTM D4477-2004A：STANDARD SPECIFICATION FOR RIGID (UNPLASTICIZED) POLY(VINYL
CHLORIDE) (PVC) SOFFIT
ASTM D4479-2000：STANDARD SPECIFICATION FOR ASPHALT ROOF COATINGS - ASBESTOS-FREE
ASTM D4481-2004：STANDARD TEST METHOD FOR TOTAL NICKEL IN FRESH ALUMINA-BASE
CATALYSTS
ASTM D448-2003A：STANDARD CLASSIFICATION FOR SIZES OF AGGREGATE FOR ROAD
AND BRIDGE CONSTRUCTION
ASTM D4482-2006：STANDARD TEST METHOD FOR RUBBER PROPERTY - EXTENSION CYCLING
FATIGUE
ASTM D4482-2006：STANDARD TEST METHOD FOR RUBBER PROPERTY - EXTENSION CYCLING
FATIGUE
ASTM D4483-2005A：STANDARD PRACTICE FOR EVALUATING PRECISION FOR TEST METHOD
STANDARDS IN THE RUBBER AND CARBON BLACK MANUFACTURING INDUSTRIES
ASTM D4485-2005A：STANDARD SPECIFICATION FOR PERFORMANCE OF ENGINE OILS
ASTM D4486-1991(R01)：STANDARD TEST METHOD FOR KINEMATIC VISCOSITY OF VOLATILE
AND REACTIVE LIQUIDS
ASTM D4487-1990(R03)：STANDARD TEST METHODS FOR ANALYSIS OF CALCIUM BOROSILICATE
ASTM D4488-1995(R01)(E)：STANDARD GUIDE FOR TESTING CLEANING PERFORMANCE
OF PRODUCTS INTENDED FOR USE ON RESILIENT FLOORING AND WASHABLE WALLS
ASTM D4489-1995(R01)：STANDARD PRACTICES FOR SAMPLING OF WATERBORNE OILS
ASTM D4490-1996(R01)(E)：STANDARD PRACTICE FOR MEASURING THE CONCENTRATION
OF TOXIC GASES OR VAPORS USING DETECTOR TUBES
ASTM D4491-1999A(R04)：STANDARD TEST METHODS FOR WATER PERMEABILITY OF
GEOTEXTILES BY PERMITTIVITY
ASTM D449-2003：STANDARD SPECIFICATION FOR ASPHALT USED IN DAMPPROOFING
AND WATERPROOFING
ASTM D4492-2003：STANDARD TEST METHOD FOR ANALYSIS OF BENZENE BY GAS CHROMATOGRAPHY
ASTM D4493-2003：STANDARD TEST METHOD FOR SOLIDIFICATION POINT OF BISPHENOL
A (4,4-?ISOPROPYLIDENEDIPHENOL)
ASTM D4494-1995(R04)：STANDARD TEST METHOD FOR DETECTING RESIDUAL ODOR
OF DRYCLEANING GRADE PERCHLOROETHYLENE
ASTM D4495-2000(R05)：STANDARD TEST METHOD FOR IMPACT RESISTANCE OF POLY(VINYL
CHLORIDE) (PVC) RIGID PROFILES BY MEANS OF A FALLING WEIGHT
ASTM D4496-2004(E)：STANDARD TEST METHOD FOR D-C RESISTANCE OR CONDUCTANCE
OF MODERATELY CONDUCTIVE MATERIALS
ASTM D4497-1994(R04)(E)：STANDARD TEST METHOD FOR DETERMINING THE OPEN
TIME OF HOT MELT ADHESIVES (MANUAL METHOD)
ASTM D4498-2000：STANDARD TEST METHOD FOR HEAT-FAIL TEMPERATURE IN SHEAR
OF HOT MELT ADHESIVES
ASTM D4499-1995(R00)：STANDARD TEST METHOD FOR HEAT STABILITY OF HOT-MELT
ADHESIVES
下一页