上一页
DIN 16085-1995 CONTROL PRESSURE GAUGES
DIN 16085-1995 带电极限信号装置的超压测量仪
DIN 16086-1992 电动压力测量仪.压力传感.压力测量变换器.压力测量仪.概念.数据纸上的说明
DIN 1614-1-1986 扁轧钢制产品；热轧钢带和薄钢板.交货技术条件.冷轧用非合金软钢
DIN 1615-1984 WELDED CIRCULAR UNALLOYED STEEL TUBES NOT SUBJECT TO SPECIAL
REQUIREMENTS; TECHNICAL DELIVERY CONDITIONS
DIN 1615-1984 无特殊要求的非合金钢焊接圆管.交货技术条件
DIN 16160-1990 温度计.术语
DIN 16167-1991 INDUSTRIAL STRAIGHT STEM LIQUID-IN-GLASS THERMOMETERS WITH
ROUND CASE, OF NOMINAL SIZE 160; DIMENSIONS ANF NOMINAL RANGES
DIN 16167-1991 带圆形套的机器用玻璃温度计.公称尺寸160.直式.尺寸和显示范围
DIN 16168-1991 INDUSTRIAL 90-?ANGLE STEM LIQUID-IN-GLASS THERMOMETERS
WITH ROUND CASE, OF NOMINAL SIZE 160; DIMENSIONS AND NOMINAL RANGES
DIN 16168-1991 带圆形套的机器用玻璃温度计.公称尺寸160.90°角式.尺寸和显示范围
DIN 16174-1991 INDUSTRIAL STRAIGHT STEM LIQUID-IN GLASS THERMOMETER WITH
ROUND CASE, OF NOMINAL SIZE 250; DIMENSIONS AND NOMINAL RANGES
DIN 16174-1991 带圆形套的机器用玻璃温度计.公称尺寸250.直式.尺寸和显示范围
DIN 16175-1991 INDUSTRIAL 90-?ANGLE STEM LIQUID-IN-GLASS THERMOMETERS
WITH ROUND CASE, OF NOMINAL SIZE 250; DIMENSIONS AND NOMINAL RANGES
DIN 16175-1991 带圆形套的机器用玻璃温度计.公称尺寸250.90°角式.尺寸和显示范围
DIN 16176-1991 INDUSTRIAL 135 -?ANGLE STEM LIQUID-IN-GLASS THERMOMETERS
WITH ROUND CASE, OF NOMINAL SIZE 250; DIMENSIONS AND NOMINAL RANGES
DIN 16176-1991 带圆形套的机器用玻璃温度计.公称尺寸250.135°角式.尺寸和显示范围
DIN 16181-1991 INDUSTRIAL STRAIGHT STEM LIQUID-IN-GLASS THERMOMETERS WITH
V-SHAPED CASE, OF NOMINAL SIZE 110; DIMENSIONS AND NOMINAL RANGES
DIN 16181-1991 带V形套的机器用玻璃温度计.公称尺寸110.直式.尺寸和显示范围
DIN 16182-1991 INDUSTRIAL 90-?ANGLE STEM LIQUID-IN-GLASS THERMOMETERS
WITH V-SHAPED CASE, OF NOMINAL SIZE 110; DIMENSIONS AND NOMINAL RANGES
DIN 16182-1991 带V形套的机器用玻璃温度计.公称尺寸110.90°角式.尺寸和显示范围
DIN 16185-1991 INDUSTRIAL STRAIGHT STEM LIQUID-IN-GLASS THERMOMETERS WITH
V-SHAPED CASE, OF NOMINAL SIZE 150; DIMENSIONS AND NOMINAL RANGES
DIN 16185-1991 带V形套的机器用玻璃温度计.公称尺寸150.直式.尺寸和显示范围
DIN 16186-1991 INDUSTRIAL 90-?ANGLE STEM LIQUID-IN-GLASS THERMOMETERS
WITH V-SHAPED CASE, OF NOMINAL SIZE 150; DIMENSIONS AND NOMINAL RANGES
DIN 16186-1991 带V形套的机器用玻璃温度计.公称尺寸150.90°角式.尺寸和显示范围
DIN 16189-1991 INDUSTRIAL STRAIGHT STEM LIQUID-IN-GLASS THERMOMETERS WITH
V-SHAPED CASE, OF NOMINAL SIZE 200; DIMENSIONS AND NOMINAL RANGES
DIN 16189-1991 带V形套的机器用玻璃温度计.公称尺寸200.直式.尺寸和显示范围
DIN 16190-1991 INDUSTRIAL 90-?ANGLE STEM LIQUID-IN-GLASS THERMOMETERS
WITH V-SHAPED CASE, OF NOMINAL SIZE 200; DIMENSIONS AND NOMINAL RANGES
DIN 16190-1991 带V形套的机器用玻璃温度计.公称尺寸200.90°角式.尺寸和显示范围
DIN 16191-1991 INDUSTRIAL 135-?ANGLE STEM LIQUID-IN-GLASS THERMOMETERS
WITH V-SHAPED CASE, OF NOMINAL SIZE 200; DIMENSIONS AND NOMINAL RANGES
DIN 16191-1991 带V形套的机器用玻璃温度计.公称尺寸200.135°角式.尺寸和显示范围
DIN 16195-1991 INDUSTRIAL LIQUID-IN-GLASS THERMOMETERS WITH ROUND OR V-SHAPED
CADE; REQUIREMENTS AND TESTING
DIN 16195-1991 带圆形或V型套的机器用玻璃温度计.要求和检验
DIN 16196-1991 带极限信号输出装置的指针式温度计.弹簧温度计和双金属片温度计
DIN 16230-1983 测量和控制.带状图表记录仪用图表
DIN 1623-2-1986 STEEL FLAT PRODUCTS; COLD REDUCED SHEET AND STRIP; TECHNICAL
DELIVERY CONDITIONS; GENERAL PURPOSE STRUCTURAL STEELS
DIN 1623-2-1986 扁轧钢制产品；冷轧钢带和薄钢板.交货技术条件.普通结构钢
DIN 16234-1992 控制技术.纸、记录仪的记录载体.非涂层纸
DIN 16235-1984 测量、控制、调节.电气测量仪.6栏纸带式多通道点式图表记录仪
DIN 16240-2-1972 图表记录仪的传送机构.72×114外壳用传送装置
DIN 16243-1972 图表记录仪的传送机构的销钉轮.结构尺寸
DIN 16257-1987 测量仪表的额定工作位置和工作位置的标记
DIN 16261-1995 带套管-套管式接头和套管-轴颈式接头的压力测量仪用的PN16关闭旋塞
DIN 16262-1995 带有联结套管和轴颈接头的压力测量仪用PN6和PN16关闭旋塞
DIN 16263-1995 带有联结套管.轴颈接头和检验接头的压力测量仪用PN16关闭旋塞
DIN 16270-1995 无检验接头压力测量仪用PN250和PN400联结阀
DIN 16271-1995 带检验接头压力测量仪用的PN250和PN400联结阀
DIN 16272-1995 带分离式检验接头压力测量仪用PN250和PN400联结阀
DIN 16281-1995 测量仪及附件的支架
DIN 16282-1995 压力测量仪及其附件用贮水管
DIN 16283-1995 压力测量仪及附件用联接套管
DIN 16284-1995 压力测量仪及附件用短管接头
DIN 16286-1997 符合DIN EN 837-1带连接销的G1/2B的锁紧螺丝
DIN 16287-1995 压力测量仪的配件检验连接旋塞用的锁紧盖和保护盖
DIN 16450-1994 NOMENCLATURE AND SYMBOLS FOR FITTINGS FOR USE WITH UNPLASTICIZED
POLYVINYL CHLORIDE (PVC-U) PRESSURE PIPES
DIN 16450-1994 无增朔聚氯乙烯压力管道用异型件.名称.缩写符号.简化表示
DIN 16451-1-1994 增塑聚氯乙烯压力管道用可塑铸铁附件.交货技术条件
DIN 16451-2-1994 增塑聚氯乙烯压力管道用可塑铸铁附件.尺寸
DIN 16500-11-1994 印刷技术.印刷进一步加工.术语
DIN 16500-2-1987 印刷技术.方法涉及的概念
DIN 16507-1-1998 印刷技术.字体大小,尺寸和概念.第1部分:铅字排版和相关技术
DIN 16507-2-1999 印刷技术.字体大小.第2部分:数字组和相关技术
DIN 16511-1966 校对符号
DIN 16513-1993 凹板印刷油墨用纯四甲苯溶剂
DIN 16514-1982 印刷技术.凸印的概念
DIN 16515-1-1963 印刷业的颜色概念.印刷技术
DIN 16518-1964 字体分级
DIN 16519-1967 版画业的印刷和印刷油墨的检验.标准印刷试样的制备
DIN 16519-2-1985 印刷品和油墨的检验.光学检验用标准印刷试样的制备
DIN 16521-1999 印刷技术.排版中的图线.尺寸
DIN 16524-1-1994 版画业的印刷和印刷油墨的检验.抗各种物理影响和化学影响的性能.耐水性.对溶剂的不退色性
DIN 16524-2-1965 版画业的印刷和印刷油墨的检验.抗各种物理影响和化学影响的性能.对碱的不褪色性.对皂洗的不褪色性.对洗涤剂不褪色性
DIN 16524-3-1965 版画业的印刷和印刷油墨的检验.抗各种物理影响和化学影响的性能.对乳酪食用脂肪、石蜡、蜡及香料的不退色性
DIN 16524-5-1998 版画业的印刷和印刷油墨的检验.抗各种物理影响和化学影响的性能.第5部分:压热器抗消毒性能
DIN 16524-6-2000 图形技术用印刷和印刷油墨的检验.抗各种物理影响和化学影响.第6部分:暴露于热碱溶液的饮料瓶标签抗渗透和剥离的时间的行为
DIN 16524-7-2001 图形技术用印刷和印刷油墨的检验.抗各种物理影响和化学影响.第7部分:暴露于热碱溶液的饮料瓶标签耐碱性溶液的性能
DIN 16525-1965 版画业用印刷和印刷油墨的检验.抗各种物理影响和化学影响的性能.耐光性
DIN 16526-1994 版画业用印刷油墨.标签上凸版平版印刷用油墨性能的符号
DIN 16527-1-1993 印刷技术.校验范围.校验图片.校验标识.基本概念
DIN 16527-3-1993 印刷技术.校检范围.印刷应用
DIN 16528-1988 印刷技术.凹版印刷概念
DIN 16529-1982 印刷技术.平板印刷的术语及定义
DIN 1653-1979 SURFACE CONDITION OF COMMERCIAL STEEL WIRES; DENOMINATIONS
AND ABBREVIATIONS THEREOF
DIN 1653-1979 商业通用的钢丝表面特性.名称及其缩写符号
DIN 16536-1-1997 印刷技术上印刷品和油墨的检验.印刷品上油墨浓度的测量.第1部分:术语.实施测量
DIN 16536-2-1995 印刷品和印刷油墨的检验.印刷品上油墨浓度测量.第2部分:对油墨密度测量计测量安排的要求
DIN 16537-1998 印刷工艺中印刷品和油墨的检验.印刷品中可视光泽数的测定
DIN 16543-1963 复制技术用14级灰色标度
DIN 16544-1988 印刷技术复制技术的概念
DIN 16547-1983 彩色栅复制时的光栅板角度
DIN 16549-1-1996 印刷技术.预印制.第1部分:图形校对符号和补充说明
DIN 16550-1-2002 办公家具.写字台.第1部分:尺寸
DIN 16551-1996 信封.概念
DIN 16552-1977 手稿画线
DIN 16553-1985 印刷和复印技术.配合制度
DIN 16555-2002 办公场所.办公楼中交流场所的空间.检测要求
DIN 16557-3-1994 管理,经济及运输用电子数据交换.联合国标准通讯格式说明
DIN 16557-4-2002 行政管理、商业和运输用电子数据交换(EDIFACT).使用文件类型定义的有可扩充置标语言的UN/EDIFACT的置标规则
DIN 16557-5-2002 管理、商务和运输用电子数据交换(EDIFACT).第5部分:以电子商务实施导则为基础的XML格式文件(XSD)的产生原则
DIN 16560-1-1998 行政管理,商业和运输用电子数据交换(EDIFACT).使用规则.第1部分:服务区段
DIN 16560-4-2000 行政管理,使用规则.第4部分:化学工业试验报告.质量D.99A
DIN 16561-22-1998 工业和贸易.行政管理,商业和运输用电子数据交换(EDIFACT).标准电文格式.第22部分:生产的基本数据(PRODAT
D.97B)
DIN 16568-3-2002 电子数据交换商业运输管理.标准电文类型.第3部分:以EDIFACT 1.2和1.3版为基础实现用的文法和专业报告电文(CONTRL)格式
DIN 16600-1991 印刷技术.制板技术中透明材料上网格色调的表面覆盖度
DIN 16604-1973 报纸；纸的尺寸.广告栏型式.广告栏宽度.广告栏之间的间隔
DIN 16609-1981 印刷技术.孔版印刷.术语
DIN 16610-1984 印刷技术.孔版印刷.丝网印刷的概念
DIN 16611-1990 印刷技术.丝网印刷用测量单位
DIN 16620-1-1994 印刷技术.胶印用印刷板.尺寸
DIN 16620-2-1991 印刷技术.间接平板印刷(胶印)用印刷板.制板.术语和测量技术相关的原理
DIN 16620-3-1993 印刷技术.间接平版印刷(胶版印刷)用印刷板.布置和印刷.概念
DIN 16621-1991 印刷技术.间接平板印刷(胶印)滚筒橡皮.概念、要求、检验、标志
DIN 16716-1992 压力铸造模.喷铸模和压模铸造模.钢制导套
DIN 16726-1986 PLASTIC ROOFING FELT AND WATERPROOFING SHEET; TESTING
DIN 16729-1984 ETHYLENE COPOLYMER BITUMEN (ECB) PLASTIC ROOFING SHEETING
AND PLASTIC SEALING SHEETING; REQUIREMENTS
DIN 16729-1984 由乙烯和沥青共聚物(ECB)制成的塑料屋顶片材和塑料密封片材.要求
DIN 16730-1986 PLASTICIZED POLYVINYL CHLORIDE (PVC-P) ROOFING FELT INCOMPATIBLE
WITH BITUMEN; REQUIREMENTS
DIN 16730-1986 增塑聚氯乙烯(PVC-P)塑料屋顶板与沥青不相容.要求
DIN 16731-1986 POLYISOBUTHYLENE (PIB) ROOFING FELT WITH BACKING; REQUIREMENTS
DIN 16731-1986 聚异丁烯(PIB)制塑料天花板.一边压薄.要求
DIN 16734-1986 MAN-MADE FIBRE REINFORCED PLASTICIZED POLYVINYL CHLORIDE
(PVC-P) ROOFING FELT INCOMPATIBLE WITH BITUMEN; REQUIREMENTS
DIN 16734-1986 有合成纤维增强剂的增塑聚氯乙烯(PVC-P)塑料屋顶板与沥青不相容.要求
DIN 16735-1986 PLASTICIZED POLYVINYL CHLORIDE (PVC-P) ROOFING FELT WITH
NON-WOVEN ROVING INNER LAYER; REQUIREMENTS
DIN 16735-1986 有非网状玻璃纤维筋的增塑聚氯乙烯(PVC-P)塑料屋顶板与沥青不相容.要求
DIN 16736-1986 CHLORINATED POLYETHYLENE (PE-C) ROOFING FELT AND WATERPROOFING
SHEET WITHOUT BACKING; REQUIREMENTS
DIN 16736-1986 聚氯乙烯制塑料房顶板和塑料密封板.一边粘合.要求
DIN 16737-1986 CHLORINATED POLYETHYLENE (PE-C) ROOFING FELT AND WATERPROOFING
SHEET WITH WOVEN FABRIC INNER LAYER; REQUIREMENTS
DIN 16737-1986 有织物衬层的聚氯乙烯(PE-C)的塑料屋顶板和密封板.要求
DIN 16740-1976 纺织玻璃纤维.电工用的机织玻璃纤维织物.交货的技术条件
DIN 16741-1976 纺织玻璃纤维.电工用有固定织边的机织玻璃纤维织带.交货的技术条件
DIN 16747-1981 塑料-模塑材料用的压模和注塑模的模塑成型表面粗糙度
DIN 16749-1986 COMPRESSION MOULDS AND INJECTION MOULDS; DIMENSIONAL TOLERANCES
FOR MOULDING PARTS
DIN 16749-1986 压力工具及压铸工具.成型工具原件的尺寸公差
DIN 16752-1-1989 压模和压铸模.浇口套
DIN 16757-1989 压力铸造工具和注塑工具.注入口拔具
DIN 16759-1992 压力铸造模.喷铸模和压模铸造模.定心套筒
DIN 16760-1-1990 COMPRESSION, INJECTION AND DIE-CASTING MOULDS; MACHINED
PLATES, UNDRILLED
DIN 16760-1-1990 挤压模具.注塑模具和压铸模具.不钻孔的加工板
DIN 16761-1992 压力铸造模.喷铸模和压模铸造模.导柱
DIN 16764-1998 铸模活页工具规范
DIN 16766-1-2001 模制工具.流体的冷却系统.第1部分:模件上的连接螺纹套接和固定空间元件
DIN 16770-1-1989 塑料的检验.热塑性模塑材料的样品.模压
DIN 16779-1-1988 塑料-模塑材料.聚甲基烯对酞酸盐模塑材料.聚乙烯对酞酸盐(PET)模塑材料和聚丁烯对酞酸盐(PTB)模塑材料.分类和标记
DIN 16779-2-1990 塑料-模塑材料.对苯二甲酸亚苯基脂模塑材料.聚对苯二甲酸亚苯基脂(PET)和聚对苯二甲酸丁二脂(PBT)模
塑材料.试样制备和性能测定
DIN 16780-1-1988 塑料-模塑材料.聚合物混合料制热塑性塑料模塑.分类和标记
DIN 16780-2-1990 POLYMER BLEND THERMOPLASTIC MOULDING MATERIALS; PREPARATION
OF SPECIMENS AND DETERMINATION OF THEIR PROPERTIES
DIN 16780-2-1990 塑料-模塑材料.聚合混合物制热塑模塑材料.试样的制备和性能测定
DIN 16781-1-1988 塑料-模塑材料.聚缩醛(POM)模塑材料.分类和标记
DIN 16781-2-1989 PLASTICS MOULDING MATERIALS; POLYOXYMETHYLENE (POM) MOULDING
MATERIALS; PREPARATION OF SPECIMENS AND DETERMINATION OF THEIR PROPERTIES
DIN 16781-2-1989 塑料-模塑材料.聚缩醛(POM)模塑材料.试样的制造和性能测定
DIN 16782-1-1991 POLYTETRAFLUOROETHYLENE (PTFE) MOULDING MATERIALS; CLASSIFICATION
AND DESIGNATION
DIN 16782-1-1991 塑料-模塑材料.聚四氟乙烯(PTFE)模塑材料.分类和标记
DIN 16782-2-1991 POLYTETRAFLUOROETHYLENE (PTFE) MOULDING MATERIALS; PREPARATION
OF SPECIMENS AND DETERMINATION OF PROPERTIES
DIN 16782-2-1991 塑料-模塑材料.聚四氟乙烯(PTFE)模塑材料.试样的制备和性能测定
DIN 16783-2-1991 ULTRA-HIGH MOLECULAR WEIGHT POLYETHYLENE (PE-UHMW) MOULDING
MATERIALS; PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
DIN 16783-2-1991 塑料-模塑材料.超高分子聚乙烯模塑材料(PE-UHMW).试样的制造和性能的测定
DIN 1680-1-1980 铸件毛坯.一般公差及加工余量.总则
DIN 16801-1983 聚碳酸酯(PC)板.尺寸
DIN 1680-2-1980 铸件毛坯.一般公差系统
DIN 16809-1980 聚对苯二甲酸乙二醇酯(PETP)和聚对苯二甲酸相二酯(PBTP)空心棒.尺寸
DIN 16810-1980 聚对苯二甲酸乙二醇酯(PETP)和聚对苯二甲酸相二酯(PBTP)板.尺寸
DIN 1681-1985 普通用途的铸钢.交货的技术条件
DIN 168-1-1998 GLASS CONTAINER KNUCKLE THREAD FINISHES - THREAD SIZES
DIN 168-1-1998 主要用于玻璃容器的圆螺纹.螺纹尺寸
DIN 16830-1-1991 HIGH IMPACT POLYVINYL CHLORIDE (PVC-HI) WINDOW PROFILES;
TESTING
DIN 16830-1-1991 高冲击韧性聚氯乙烯制窗框.检验方法
DIN 16830-2-1991 HIGH IMPACT WHITE POLYVINYL CHLORIDE (PVC-HI) WINDOW
PROFILES; REQUIREMENTS
DIN 16830-2-1991 高冲击韧性聚氯乙烯制白色窗框.要求
DIN 16830-3-2000 高耐冲击聚氯乙烯(PVC-HI)制门窗框.第3部分:表面着色框架.要求
DIN 16830-4-2000 高耐冲击聚氯乙烯(PVC-HI)制门窗框.第4部分:表面着色框架.试验方法
DIN 16831-1-2003 聚丁烯(PB)制压力管道用管连接件和元部件.PB 125.第1部分:承插焊接用喷射铸造弯管.尺寸
DIN 1683-1-1998 ROUGH CASTINGS - GENERAL TOLERANCES AND MACHINING ALLOWANCES
(FOR REPLACEMENT PURPOSES ONLY)
DIN 1683-1-1998 铸钢毛坯.一般公差及加工余量.不适于新结构
DIN 16831-2-2003 聚丁烯(PB)制压力管道用管连接件和元部件.PB 125.第2部分:承插焊接用喷射铸造三通管.尺寸
DIN 16831-3-2003 聚丁烯(PB)制压力管道用管连接件和元部件.PB 125.第3部分:承插焊接用喷射铸造套管和帽.尺寸
DIN 16831-4-2003 聚丁烯(PB)制压力管道用管连接件和元部件.PB 125.第4部分:承插焊接用喷射铸造异径管.尺寸
DIN 16831-5-1999 PIPE FITTINGS AND JOINT ASSEMBLIES FOR TYPE PB 125 POLYBUTENE
PRESSURE PIPES - PART 5: GENERAL QUALITY REQUIREMENTS AND TESTING
DIN 16831-5-1999 聚丁烯(PB)制压力管道用管连接件和异型件.PB125.第5部分:一般质量要求.检验
DIN 16831-7-1999 聚丁烯(PB)制压力管道用管连接件和异型件.PB125.第7部分:套管焊接用凸台,法兰,密封圈.尺寸
DIN 16832-1-2002 压力管用氯化的聚氯乙烯管连接件和元件.PVC-C 200.第1部分:尺寸
DIN 16832-2-2002 压力管用氯化的聚氯乙烯管连接件和元件.PVC-C 200.第2部分:一般的质量检验要求
DIN 16833-2001 POLYETHYLENE PIPES WITH ENHANCED THERMAL RESISTANCE - GENERAL
QUALITY REQUIREMENTS AND TESTING
DIN 16833-2001 提高了耐温性的聚乙烯管.一般质量要求.试验
DIN 16834-2001 POLYETHYLENE PIPES WITH ENHANCED THERMAL RESISTANCE - DIMENSIONS
DIN 16834-2001 提高了耐温性的聚乙烯管.尺寸
DIN 1684-1-1998 ROUGH CASTINGS OF MALLEABLE IRON - GENERAL TOLERANCES
AND MACHINING ALLOWANCES (FOR REPLACEMENT PURPOSES ONLY)
DIN 1684-1-1998 可锻铸铁毛坯.一般公差及加工余量.不适于新结构
DIN 1685-1-1998 ROUGH CASTINGS OF SPHEROIDAL GRAPHITE CAST IRON - GENERAL
TOLERANCES AND MACHINING ALLOWANCES (FOR REPLACEMENT PURPOSES ONLY)
DIN 1685-1-1998 球墨铸铁毛坯.一般公差及加工余量.不适于新结构
DIN 1686-1-1998 ROUGH CASTINGS OF GREY CAST IRON - GENERAL TOLERANCES
AND MACHINING ALLOWANCES (FOR REPLACEMENT PURPOSES ONLY)
DIN 1686-1-1998 片状石墨铸铁毛坯.一般公差及加工余量.不适于新结构
DIN 16864-1989 地板.墙壁.顶棚贴面粘合剂.弹性体铺面用弥散.人造橡胶以及反应性粘合剂.要求和检验
DIN 16867-1982 GLASS FIBRE REINFORCED POLYESTER RESIN (UP-GF) PIPES, FITTINGS
AND JOINTS FOR USE IN CHEMICAL PIPELINES; TECHNICAL DELIVERY CONDITIONS
DIN 16867-1982 化工管道用玻璃纤维聚酯树脂管.异型件和接头.交货技术条件
DIN 16868-1-1994 WOUND AND FILLED GLASS FIBRE REINFORCED POLYESTER RESIN
PIPES - DIMENSIONS
DIN 16868-1-1994 玻璃纤维增强聚酯树脂管材(UP-GF).第1部分:全卷绕.尺寸
DIN 16868-2-1994 玻璃纤维增强聚酯树脂管材(UP-GF).第2部分:全卷绕.一般质量要求.检验
DIN 16869-1-1995 CENTRIFUGALLY CAST AND FILLED GLASS FIBRE REINFORCED
POLYESTER RESIN PIPES - DIMENSIONS
DIN 16869-1-1995 离心浇注玻璃纤维增强聚脂树脂管(VP-GF).第1部分:尺寸
DIN 16869-2-1995 离心浇注玻璃纤维增强聚脂树脂管(VP-GF).一般质量要求.检验
DIN 16870-1-1987 WOUND GLASS FIBRE REINFORCED EPOXY RESIN PIPES; DIMENSIONS
DIN 16870-1-1987 卷绕玻璃纤维增强环氧树脂管.尺寸
DIN 16871-1982 CENTRIFUGALLY CAST GLASS FIBRE REINFORCED EPOXY RESIN (EP-GF)
PIPES; DIMENSIONS
DIN 16871-1982 离心玻璃纤维增强环氧树脂管.尺寸
DIN 1687-1-1998 ROUGH CASTINGS OF HEAVY METAL ALLOYS PRODUCED BY SAND
CASTING - GENERAL TOLERANCES AND MACHINING ALLOWANCES (FOR REPLACEMENT
PURPOSES ONLY)
DIN 1687-1-1998 重金属合金的铸件毛坯.砂模铸造.一般公差及加工余量.不适于新结构
DIN 16872-1993 GLASS FIBRE REINFORCED POLYESTER RESIN (UP-GRP) FLANGES
FOR USE WITH THERMOPLASTICS PIPE FITTINGS - DIMENSIONS
DIN 16872-1993 热塑性塑料管道用管连接件和管道部件.玻璃纤维增强聚酯树脂法兰(UP-GE).尺寸
DIN 1687-3-1980 重金属合金的铸件毛坯.金属模铸造.一般公差及加工余量
DIN 16873-1997 UNPLASTICIZED POLYVINYL CHLORIDE (PVC-U) PIPES AND FITTINGS
FOR CABLE DUCTING - DIMENSIONS AND TECHNICAL DELIVERY CONDITIONS
DIN 16873-1997 电缆保护管用未增塑聚氯乙稀(PVC-U)管和管配件.尺寸和技术交货条件
DIN 1687-4-1986 HEAVY METAL ALLOY RAW CASTINGS; PRESSURE DIE CASTINGS;
GENERAL TOLERANCES, MACHINING ALLOWANCES
DIN 1687-4-1986 重金属合金的铸件毛坯.压铸.一般公差及加工余量
DIN 16874-2000 PIPES AND FITTINGS OF HIGH-DENSITY POLYETHYLENE (PE-HD)
FOR CABLE DUCTING - DIMENSIONS AND TECHNICAL DELIVERY CONDITIONS
DIN 16874-2000 电缆输送管道用高密度聚乙烯(PE-HD)管道和管件.尺寸和技术提交条件
DIN 16875-1998 UNPLASTICIZED POLYVINYL CHLORIDE (PVC-U) PIPES AND FITTINGS
FOR BURIED DUCTING - DIMENSIONS AND TECHNICAL DELIVERY CONDITIONS
DIN 16875-1998 地下铺设的保护管用未增塑聚氯乙烯(PVC-U)管和管件.尺寸和交货技术条件
DIN 16876-2000 HIGH DENSITY POLYETHYLENE (PE-HD) PIPES AND FITTINGS FOR
BURIED DUCTING - DIMENSIONS AND TECHNICAL DELIVERY CONDITIONS
DIN 16876-2000 地下管道用高密度聚乙烯(PE-HD)管和配件.尺寸和交货技术条件
DIN 1688-1-1998 ROUGH CASTINGS OF LIGHT METAL ALLOYS PRODUCED BY SAND
CASTING - GENERAL TOLERANCES AND MACHINING ALLOWANCES (FOR REPLACEMENT
PURPOSES ONLY)
DIN 1688-1-1998 轻金属合金的铸件毛坯.砂模铸造.一般公差及加工余量.不适于新结构
DIN 1688-3-1980 LIGHT METAL ALLOY RAW CASTINGS; GRAVITY DIE CASTINGS;
GENERAL TOLERANCES, MACHINING ALLOWANCES
DIN 1688-3-1980 轻金属合金的铸件毛坯.金属模铸造.一般公差及加工余量
DIN 1688-4-1986 LIGHT METAL ALLOY RAW CASTINGS; PRESSURE DIE CASTINGS;
GENERAL TOLERANCES, MACHINING ALLOWANCES
DIN 1688-4-1986 轻金属合金的铸件毛坯.压铸.一般公差及加工余量
DIN 16887-1990 DETERMINATION OF THE LONG-TERM HYDROSTATIC PRESSURE RESISTANCE
OF THERMOPLASTICS PIPES
DIN 16887-1990 热塑性塑料管的检验.持久内压性能的测定
DIN 16888-1-1989 DETERMINATION OF CHEMICAL RESISTANCE OF THERMOPLASTICS
PIPES; POLYOLEFIN PIPES
DIN 16888-1-1989 热塑性塑料管化学阻抗的评定.聚烯烃管
DIN 16888-2-1991 DETERMINATION OF CHEMICAL RESISTANCE OF THERMOPLASTICS
PIPES; UNPLASTICIZED POLYVINYL CHLORIDE (PVC-U) PIPES
DIN 16888-2-1991 热塑性塑料管化学阻抗的评定.未增塑聚氯乙烯管
DIN 16889-1-1989 DETERMINATION OF THE CHEMICAL RESISTANCE FACTOR FOR THERMOPLASTICS
PIPES; POLYOLEFIN PIPES
DIN 16889-1-1989 热塑性塑料管化学阻力系数的测定.聚烯烃管
DIN 16890-1980 丙烯腈-丁二烯-苯乙烯或丙烯腈-苯乙烯酸脂制管.一般质量要求.检验
DIN 16891-1980 丙烯腈-丁二烯-苯乙烯或丙烯腈-苯乙烯酸脂制管.尺寸
DIN 16892 Berichtigung 1-2001 DIN 16892:2000-07的勘误
DIN 16892-2000 CROSSLINKED HIGH-DENSITY POLYETHYLENE (PE-X) PIPES - GENERAL
QUALITY REQUIREMENTS AND TESTING
DIN 16892-2000 交联聚乙烯(PE-X)管.一般要求和试验
DIN 16893 Berichtigung 1-2001 DIN 16893:2000-09的勘误
DIN 16893-2000 CROSSLINKED HIGH-DENSITY POLYETHYLENE (PE-X) PIPES - DIMENSIONS
DIN 16893-2000 交联聚乙烯管(PE-X).尺寸
DIN 16894-1997 CROSSLINKED MEDIUM DENSITY POLYETHYLENE (PE-MDX) PIPES
- GENERAL QUALITY REQUIREMENTS AND TESTING
DIN 16894-1997 中等密度的交联聚乙烯管(PE-MDX).一般质量要求.试验
DIN 16895-1996 CROSSLINKED MEDIUM DENSITY POLYETHYLENE (PE-MDX) PIPES
- DIMENSIONS
DIN 16895-1996 均密度交联聚乙烯管(PE-MDX).尺寸
DIN 1690-10-1991 金属材料铸件的交货技术条件.高应力管件阀门用铸钢的补充规定
DIN 16901-1982 PLASTICS MOULDINGS; TOLERANCES AND ACCEPTANCE CONDITIONS
FOR LINEAR DIMENSIONS
DIN 16901-1982 塑料成型件.纵向尺寸的公差和验收条件
DIN 16903-1-1974 OPEN INSERT NUTS FOR PLASTICS MOULDINGS
DIN 16903-1-1974 模塑用开口螺纹套
DIN 16903-2-1974 CLOSED INSERT NUTS WITH DISC FOR PLASTICS MOULDINGS
DIN 16903-2-1974 模塑用带垫圈的闭口螺纹套
DIN 16903-3-1974 CLOSED INSERT NUTS WITH DEAD HOLE FOR PLASTICS MOULDINGS
DIN 16903-3-1974 模塑用闭口螺纹套
DIN 16903-4-1991 塑料模制件和压铸件用重型闭式螺纹件
DIN 16906-1989 TESTING OF PLASTIC SHEETING AND FILMS; SAMPLE AND SPECIMEN
PREPARATION AND CONDITIONING
DIN 16906-1989 塑料板和塑料薄膜的检验.试验和试样、取样、预处理
DIN 16911 Bb.-1972 塑料-模塑材料种类.聚酯树脂-模压塑料制成的标准试样的性能
DIN 16913-1-1981 塑料-模塑材料.增强的热固性树脂-模塑材料.概念、分类、缩写符号
DIN 16913-2-1981 塑料--模塑材料.增强的热固性树脂--模塑材料.标准试样性能的测定
DIN 16913-3-1981 塑料--模塑材料.增强的热固性树脂--模塑材料.能塑变的扁形预浸渍体.聚酯--树脂垫.型号.要求
DIN 16916-1-1981 塑料.热固性树脂.酚醛树脂.概念.分类
DIN 16916-2-1987 塑料.热固性树脂.酚醛树脂.检验方法
DIN 16920-1981 粘胶.粘胶材料加工.概念
DIN 16922-1981 用塑料制成的柔性带状平幅物品.工艺分类
DIN 16927-1988 UNPLASTICIZED POLYVINYL CHLORIDE SHEET; TECHNICAL DELIVERY
CONDITIONS
DIN 16927-1988 非增塑的聚氯乙烯板.交货技术条件
DIN 16928-1979 PIPES OF THERMOPLASTIC MATERIALS; PIPE JOINTS, ELEMENTS
FOR PIPES, LAYING; GENERAL DIRECTIONS
DIN 16928-1979 热塑性塑料管道.管接头.管道部件.管道敷设.一般原则
DIN 16935-1986 POLYISOBUTYLENE (PIB) WATERPROOFING SHEET; REQUIREMENTS
DIN 16935-1986 聚异丁烯(PIB)塑料密封板.与沥青相溶.要求
DIN 16937-1986 PLASTICIZED POLYVINYL CHLORIDE (PVC-P) WATERPROOFING SHEET
COMPATIBLE WITH BITUMEN; REQUIREMENTS
DIN 16937-1986 增塑聚氯乙烯(PVC-P)塑料密封板.要求
DIN 16938-1986 PLASTICIZED POLYVINYL CHLORIDE (PVC-P) WATERPROOFING SHEET
INCOMPATIBLE WITH BITUMEN; REQUIREMENTS
DIN 16938-1986 增塑聚氯乙烯(PVC-P)塑料密封板.与沥青不相容.要求
DIN 16940-1964 软聚氯乙烯挤压软管.无公差说明的尺寸允许偏差
DIN 16941-1986 THERMOPLASTICS EXTRUDED PROFILES; GENERAL TOLERANCES OF
SIZE, FORM AND ORIENTATION
DIN 16941-1986 热塑性塑料的挤压型材.尺寸.形状和塑料层的一般公差
DIN 16942-1966 软聚氯乙烯水管.尺寸
DIN 16944-1988 玻璃纤维增强的热固性树脂模塑材料.检验方法
DIN 16945-1989 TESTING OF RESINS, HARDENERS AND ACCELERATORS, AND CATALYZED
RESINS
DIN 16945-1989 活性树脂.反应剂和活性树脂模塑材料.检验方法
DIN 16946-1-1989 CURED CASTING RESINS; TESTING
DIN 16946-1-1989 活性树脂模塑材料.注模树脂模塑材料.检验方法
DIN 16946-2-1989 CURED CASTING RESINS; TYPES
DIN 16946-2-1989 活性树脂模塑材料.注模树脂模塑材料.类型
DIN 16948-1-1975 玻璃纤维增强的热固性树脂模塑材料.分类和标志
DIN 16948-2-1975 玻璃纤维增强的热固性树脂模塑材料.特种模塑材料的性能
DIN 16954-1980 织物.信号服用的有塑料涂层的柔韧平面构型物品.要求.检验
DIN 16956-1976 有冲击韧性的改性苯乙烯丙烯脯共聚物(ABS 或ASA)板.交货的技术条件
DIN 16957-1985 聚甲基丙烯酸甲脂(PMMA)浇铸板.交货技术条件
DIN 16958-1981 聚甲基丙烯酸甲酯(PMMA)挤压成型板.交货的技术条件
DIN 16959-1973 软聚氯乙烯(PVC)板交货的技术条件
DIN 16960-1-1974 WELDING OF THERMOPLASTICS; PRINCIPLES
DIN 16960-1-1974 热塑料的焊接.一般原理
DIN 16961-1-2000 THERMOPLASTIC PIPES AND FITTINGS WITH PROFILED OUTER
AND SMOOTH INNER SURFACES - DIMENSIONS
DIN 16961-1-2000 异型外壁和光滑管内壁的热塑性材料管和配件.第1部分:尺寸
DIN 16961-2-2000 THERMOPLASTICS PIPES AND FITTINGS WITH PROFILED OUTER
AND SMOOTH INNER SURFACES - TECHNICAL DELIVERY CONDITIONS
DIN 16961-2-2000 异型外壁和光滑管内壁的热塑性材料管和配件.第2部分:技术交付规范
DIN 16962-10-1989 PIPE JOINT ASSEMBLIES AND FITTINGS FOR TYPES 1 TO 3
POLYPROPYLENE (PP) PRESSURE PIPES; INJECTION-MOULDED FITTINGS FOR BUTT
WELDING; DIMENSIONS
DIN 16962-10-1989 聚丙烯压力管道用管连接和管零件.1型、2型和3型.对焊用压铸管配件.尺寸
DIN 16962-11-1980 PIPE JOINTS AND ELEMENTS FOR POLYPROPYLENE (PP) PRESSURE
PIPELINES, TYPES 1 AND 2; TURNED AND PRESSED REDUCING SOCKETS FOR BUTT-WELDING,
DIMENSIONS
DIN 16962-11-1980 聚丙烯压力管道用管连接和管道零件.1型和2型.用于对焊的车削和冲压异径管件.尺寸
DIN 16962-1-1980 PIPE JOINTS AND ELEMENTS FOR POLYPROPYLENE (PP) PRESSURE
PIPELINES, TYPES 1 AND 2; BENDS OF SEGMENTAL CONSTRUCTION FOR BUTT-WELDING,
DIMENSIONS
DIN 16962-1-1980 聚丙烯压力管道用管连接和管道零件.1型和2 型.对焊用结构预制弯管.尺寸
DIN 16962-12-1999 PIPE FITTINGS AND JOINT ASSEMBLIES FOR POLYPROPYLENE
PRESSURE PIPES - DIMENSIONS OF BUSHINGS, FLANGES AND SEALING ELEMENTS,
FOR SOCKET WELDING
DIN 16962-12-1999 聚丙烯(PP)制压力管道用管连接件和异型件.PP-H 100,PP-B 80和PP-R 80.第12部分:套管焊接用凸台,法兰,密封圈.尺寸
DIN 16962-13-1987 PIPE JOINT ASSEMBLIES AND FITTINGS FOR TYPE 1 AND TYPE
2 POLYPROPYLENE (PP) PRESSURE PIPES; PIPE COUPLINGS; DIMENSIONS
DIN 16962-13-1987 聚丙烯压力管道用管连接和管零件.1型和2型.管螺纹连接.尺寸
DIN 16962-2-1983 PIPE JOINT ASSEMBLIES AND FITTINGS FOR TYPES 1 AND 2
POLYPROPYLENE (PP) PRESSURE PIPES; TEES AND BRANCHES PRODUCED BY SEGMENT
INSERTS AND NECKING FOR BUTT WELDING; DIMENSIONS
DIN 16962-2-1983 聚丙烯压力管道用管连接和管道零件.1型和2型.分段结构对焊用结构预制T型管及支管.尺寸
DIN 16962-3-1980 PIPE JOINTS AND ELEMENTS FOR POLYPROPYLENE (PP) PRESSURE
PIPELINES, TYPES 1 AND 2; BENDS FORMED FROM PIPE FOR BUTT-WELDING, DIMENSIONS
DIN 16962-3-1980 聚丙烯压力管道用管连接和管道零件.1型和2型.对焊用管成形弯头.尺寸
DIN 16962-4-1988 PIPE JOINT ASSEMBLIES AND FITTINGS FOR TYPES 1 AND 2
POLYPROPYLENE (PP) PRESSURE PIPES; ADAPTORS FOR FUSION JOINTING, FLANGES
AND SEALING ELEMENTS; DIMENSIONS
DIN 16962-4-1988 聚丙烯压力管道用管连接和管道零件.1型和2型.对焊焊接发热元件凸肩法兰、密封、尺寸
DIN 16962-5-2000 PIPE FITTINGS AND JOINT ASSEMBLIES FOR POLYPROPYLENE
(PP) PRESSURE PIPES - PART 5: GENERAL QUALITY REQUIREMENTS AND TESTING
DIN 16962-5-2000 聚丙烯压力管道用管连接和管道零件.PP-H100,PP-B80,PP-R80.第5部分:一般质量要求.试验
DIN 16962-6-1980 PIPE JOINTS AND ELEMENTS FOR POLYPROPYLENE (PP) PRESSURE
PIPELINES, TYPES 1 AND 2; INJECTION MOULDED ELBOWS FOR SOCKET-WELDING,
DIMENSIONS
DIN 16962-6-1980 聚丙烯压力管道用管连接和管道零件.1型和2型.套筒焊接用注塑弯头.尺寸
DIN 16962-7-1980 PIPE JOINTS AND ELEMENTS FOR POLYPROPYLENE (PP) PRESSURE
PIPELINES, TYPES 1 AND 2; INJECTION MOULDED TEE PIECES FOR SOCKET-WELDING,
DIMENSIONS
DIN 16962-7-1980 聚丙烯压力管道用管连接和管道零件.1型和2型.套筒焊接用注塑三通.尺寸
DIN 16962-8-1980 PIPE JOINTS AND ELEMENTS FOR POLYPROPYLENE (PP) PRESSURE
PIPELINES, TYPES 1 AND 2; INJECTION MOULDED SOCKETS AND CAPS FOR SOCKET-WELDING,
DIMENSIONS
DIN 16962-8-1980 聚丙烯压力管道的管连接和管道零件.1型和2型.套筒焊接用注塑套管和管帽.尺寸
DIN 16962-9-1983 PIPE JOINT ASSEMBLIES AND FITTINGS FOR TYPES 1 AND 2
POLYPROPYLENE (PP) PRESSURE PIPES; INJECTION MOULDED REDUCERS AND NIPPLES
FOR SOCKET WELDING; DIMENSIONS
DIN 16962-9-1983 聚丙烯压力管道用管连接和管道零件.1型和2型.套筒焊接用注塑异径管件与套管.尺寸
DIN 16963-10-1980 PIPE JOINTS AND ELEMENTS FOR HIGH DENSITY POLYETHYLENE
(HDPE) PRESSURE PIPELINES, TYPES 1 AND 2; INJECTION MOULDED SOCKETS AND
CAPS FOR SOCKET-WELDING, DIMENSIONS
DIN 16963-10-1980 高密度聚乙烯压力管道用管连接和管道零件.1型和2型.套筒焊接用压铸的套筒与帽盖.尺寸
DIN 16963-11-1999 PIPE FITTINGS AND JOINT ASSEMBLIES FOR PRESSURE PIPES
MADE FROM TYPES PE 80 AND PE 100 POLYETHYLENE - DIMENSIONS OF BUSHINGS,
FLANGES AND SEALING ELEMENTS, FOR SOCKET WELDING
DIN 16963-11-1999 聚乙烯(PE)制压力管道用管连接件和异型件.PE 80和PE 100.第11部分:套管焊接用凸台,法兰,密封圈.尺寸
DIN 16963-1-1980 PIPE JOINTS AND ELEMENTS FOR HIGH DENSITY POLYETHYLENE
(HDPE) PRESSURE PIPELINES, TYPES 1 AND 2; PIPE BENDS OF SEGMENTAL CONSTRUCTION
FOR BUTT-WELDING, DIMENSIONS
DIN 16963-1-1980 高密度聚乙烯压力管道用管连接和管道零件.1型和2型.用于对焊的组合结构预制弯头.尺寸
DIN 16963-13-1980 PIPE JOINTS AND ELEMENTS FOR HIGH PRESSURE POLYETHYLENE
(HDPE) PRESSURE PIPELINES, TYPES 1 AND 2; TURNED AND PRESSED REDUCING
SOCKETS FOR BUTT-WELDING, DIMENSIONS
DIN 16963-13-1980 高密度聚乙烯压力管道用管连接和管道零件.1型和2型.对焊用车削的和冲压的缩径管件.尺寸
DIN 16963-14-1983 PIPE JOINT ASSEMBLIES AND FITTINGS FOR TYPES 1 AND 2
HIGH-DENSITY POLYETHYLENE (HDPE) PRESSURE PIPES; INJECTION MOULDED REDUCERS
AND NIPPLES FOR SOCKET WELDING; DIMENSIONS
DIN 16963-14-1983 高密度聚乙烯压力管道用管连接和管道零件.1型和2型.套筒焊接用压铸的缩径管件与套管.尺寸
DIN 16963-15-1987 PIPE JOINT ASSEMBLIES AND FITTINGS FOR HIGH-DENSITY
POLYETHYLENE (HDPE) PRESSURE PIPES; PIPE COUPLINGS; DIMENSIONS
DIN 16963-15-1987 高密度聚乙烯压力管用管连接和管零件.螺纹管接头.尺寸
DIN 16963-2-1983 PIPE JOINT ASSEMBLIES AND FITTINGS FOR TYPES 1 AND 2
HIGH-DENSITY POLYETHYLENE (HDPE) PRESSURE PIPES; TEES AND BRANCHES PRODUCED
BY SEGMENT INSERTS AND NECKING FOR BUTT WELDING; DIMENSIONS
DIN 16963-2-1983 高密度聚乙烯压力管道用管连接和管道零件.1型和2型.用于对焊的组合结构预制三通与支管.尺寸
DIN 16963-3-1980 PIPE JOINTS AND ELEMENTS FOR HIGH DENSITY POLYETHYLENE
(HDPE) PRESSURE PIPELINES, TYPES 1 AND 2; PIPE BENDS FOR BUTT-WELDING,
DIMENSIONS
DIN 16963-3-1980 高密度聚乙烯压力管道用管连接与管道零件.1型和2型.对焊用管成型弯管.尺寸
DIN 16963-4-1988 PIPE JOINT ASSEMBLIES AND FITTINGS FOR HIGH-DENSITY POLYETHYLENE
(PE-HD) PRESSURE PIPES; ADAPTORS FOR FUSION JOINTING, FLANGES AND SEALING
ELEMENTS; DIMENSIONS
DIN 16963-4-1988 高密度聚乙烯压力管用管连接和管零件.对焊接头适配器.法兰盘和密封用夹紧器.尺寸
DIN 16963-5-1999 PIPE FITTINGS AND JOINTS AND ASSEMBLIES FOR PE 80 AND
PE 100 POLYETHYLENE PRESSURE PIPES - PART 5: GENERAL QUALITY REQUIREMENTS
AND TESTING
DIN 16963-5-1999 加压管道 PE 80 和 PE 100用聚乙烯制管道连接件和异型件.第5部分:一般质量要求和测试
DIN 16963-6-1989 PIPE JOINT ASSEMBLIES AND FITTINGS FOR HIGH-DENSITY POLYETHYLENE
(PE-HD) PRESSURE PIPES; INJECTION-MOULDED FITTINGS FOR BUTT WELDING; DIMENSIONS
DIN 16963-6-1989 高密度聚乙烯压力管用管连接和管零件.对焊用压铸管配件.尺寸
DIN 16963-7-1989 PIPE JOINT ASSEMBLIES AND FITTINGS FOR HIGH-DENSITY POLYETHYLENE
(PE-HD) PRESSURE PIPES; FITTINGS FOR RESISTANCE WELDING; DIMENSIONS
DIN 16963-7-1989 高密度聚乙烯制压力管道用管连接和管道零件.电阻焊接配件.尺寸
DIN 16963-8-1980 PIPE JOINTS AND ELEMENTS FOR HIGH DENSITY POLYETHYLENE
(HDPE) PRESSURE PIPELINES, TYPES 1 AND 2; INJECTION MOULDED ELBOWS FOR
SOCKET-WELDING, DIMENSIONS
DIN 16963-8-1980 高密度聚乙烯压力管道用管连接和管道零件.1型和2型.套筒焊接用压铸弯头.尺寸
DIN 16963-9-1980 PIPE JOINTS AND ELEMENTS FOR HIGH DENSITY POLYETHYLENE
(HDPE) PRESSURE PIPELINES, TYPES 1 AND 2; INJECTION MOULDED TEE PIECES
FOR SOCKET-WELDING, DIMENSIONS
DIN 16963-9-1980 高密度聚乙烯压力管道用管连接和管道零件.1型和2型.套筒焊接用压铸弯三通管.尺寸
DIN 16964-1988 WOUND GLASS FIBRE REINFORCED POLYESTER RESINS (UP-GF) PIPES;
GENERAL QUALITY REQUIREMENTS AND TESTING
DIN 16964-1988 绕制玻璃纤维增强聚酯树脂管.一般质量要求.检验
DIN 16965-1-1982 WOUND GLASS FIBRE REINFORCED POLYESTER RESIN (UP-GF);
PIPES, TYPE A PIPES, DIMENSIONS
DIN 16965-1-1982 绕制玻璃纤维增强聚酯树脂管.管型A.尺寸
DIN 16965-2-1982 WOUND GLASS FIBRE REINFORCED POLYESTER RESIN (UP-GF);
PIPES, TYPE B PIPES, DIMENSIONS
DIN 16965-2-1982 绕制玻璃纤维增强聚脂树酯管.管型B.尺寸
DIN 16965-4-1982 WOUND GLASS FIBRE REINFORCED POLYESTER RESIN (UP-GF);
PIPES, TYPE D PIPES, DIMENSIONS
DIN 16965-4-1982 绕制玻璃纤维增强聚脂树酯管.管型D.尺寸
DIN 16965-5-1982 WOUND GLASS FIBRE REINFORCED POLYESTER RESIN (UP-GF);
PIPES, TYPE E PIPES, DIMENSIONS
DIN 16965-5-1982 绕制玻璃纤维增强聚脂树酯管.管型E.尺寸
DIN 16966-1-1988 GLASS FIBRE REINFORCED POLYESTER RESIN (UP-GF) PIPE FITTINGS
AND JOINT ASSEMBLIES; FITTINGS; GENERAL QUALITY REQUIREMENTS AND TESTING
DIN 16966-1-1988 玻璃纤维增强聚酯树脂异型件和连接件.一般质量要求.检验
DIN 16966-2-1982 GLASS FIBRE REINFORCED POLYESTER RESIN (UP-GF) PIPE FITTINGS
AND JOINTS; ELBOWS, DIMENSIONS
DIN 16966-2-1982 玻璃纤维增强聚酯树脂异型件和连接件.弯管.尺寸
DIN 16966-4-1982 GLASS FIBRE REINFORCED POLYESTER RESIN (UP-GF) PIPE FITTINGS
AN JOINTS; TEES, NOZZLES, DIMENSIONS
DIN 16966-4-1982 玻璃纤维增强聚酯树脂异型件和连接件.三通喷嘴尺寸
DIN 16966-5-1982 GLASS FIBRE REINFORCED POLYESTER RESIN (UP-GF) PIPE FITTINGS
AND JOINTS; REDUCERS, DIMENSIONS
DIN 16966-5-1982 玻璃纤维增强聚酯树脂异型件和连接件.缩径件.尺寸
DIN 16966-6-1982 GLASS FIBRE REINFORCED POLYESTER RESIN (UP-GF) PIPE FITTINGS
AND JOINT ASSEMBLIES; COLLARS, FLANGES, JOINT RINGS, DIMENSIONS
DIN 16966-6-1982 玻璃纤维增强聚酯树脂异型件和连接件.凸肩.法兰.密封件.尺寸
DIN 16966-7-1995 GLASS FIBRE REINFORCED POLYESTER RESIN (UP-GRP) PIPE
FITTINGS AND JOINT ASSEMBLIES - REQUIREMENTS FOR AND TESTING OF BUSHES,
FLANGES, AND FLANGED AND LAMINATED JOINTS
DIN 16966-7-1995 玻璃纤维增强聚酯树脂异形件和连接件.第7部分:凸肩.法兰.法兰密封件和层压塑料件.一般质量要求.检验
DIN 16966-8-1982 GLASS FIBRE REINFORCED POLYESTER RESIN (UP-GF) PIPE FITTINGS
AND JOINTS; LAMINATED JOINTS; DIMENSIONS
DIN 16966-8-1982 玻璃纤维增强聚酯树脂异型件和连接件.层压塑料连接件.尺寸
DIN 16967-2-1982 GLASS FIBRE REINFORCED EPOXY RESIN (EP-GF) PIPE FITTINGS
AND JOINTS; ELBOWS, TEES, DIMENSIONS
DIN 16967-2-1982 玻璃纤维增强环氧树脂异型件和连接件.弯管.三通尺寸
DIN 16968-1996 POLYBUTENE (PB) PIPES - GENERAL QUALITY REQUIREMENTS AND
TESTING
DIN 16968-1996 聚丁烯(PB)管.一般质量要求和检验
DIN 16969-1997 TYPE PB 125 POLYBUTENE PIPES - DIMENSIONS
DIN 16969-1997 聚丁烯(PB)管.PB 125型.尺寸
DIN 16970-1970 ADHESIVES FOR BONDING PIPES AND PIPE SYSTEM ELEMENTS OF
RIGID PVC; GENERAL QUALITY REQUIREMENTS AND TESTINGS
DIN 16970-1970 硬聚氯乙烯(PVC)制管子和管道零件连接用的粘胶.一般质量要求和检验
DIN 16972-1995 COMPRESSION-MOULDED POLYETHYLENE (PE) SHEETS - TECHNICAL
DELIVERY CONDITIONS
DIN 16972-1995 高密聚乙烯(PE-UHMW),(PE-HMW),(PE-HD)制冲压板.交货技术条件
DIN 16977-1980 聚缩醛(POM)板.尺寸
DIN 16978-1975 聚缩醛(POM)空心棒.尺寸
DIN 16980-1987 THERMOPLASTICS RODS; DIMENSIONS
DIN 16980-1987 热塑性塑料圆棒.尺寸
DIN 16982-1974 聚酰胺(PA)管.尺寸
DIN 16983-1980 聚酰胺(PA)空心棒.尺寸
DIN 16984-1980 聚酰胺(PA)板.尺寸
DIN 16985-1989 SEMI-FINISHED THERMOPLASTICS PRODUCTS; TECHNICAL DELIVERY
CONDITIONS
DIN 16985-1989 热塑性塑料的半成品.交货技术条件
DIN 16986-1987 THERMOPLASTICS FLAT BARS; DIMENSIONS
DIN 16986-1987 热塑性塑料扁棒.尺寸
DIN 16995-1992 包装用的薄膜.塑料薄膜.性能.检验方法
DIN 17007-4-1963 MATERIAL NUMBERS; SYSTEM OF THE PRINCIPAL GROUPS 2 AND
3: NON-FERROUS METALS
DIN 1701-1980 精炼镍
DIN 17014 Bb.2-1961 钢铁材料热处理；专业术语的外语译名
DIN 17014-3-1976 HEAT TREATMENT OF FERROUS MATERIALS; NOTATION TO INDICATE
HEAT TREATMENT PROCESSES
DIN 17014-3-1976 钢铁材料热处理.热处理简要说明
DIN 17021-1-1976 HEAT TREATMENT OF FERROUS METALS; MATERIAL SELECTION;
STEEL SELECTION ACCORDING TO HARDENABILITY
DIN 17021-1-1976 钢铁材料热处理.材料选择.基于淬硬选择钢材
DIN 1702-1967 NICKEL ANODES
DIN 1702-1967 镍阳极
DIN 17022-1-1994 HEAT TREATMENT OF FERROUS PRODUCTS - HARDENING AND TEMPERING
DIN 17022-1-1994 钢铁材料热处理.热处理方法.部件的淬火,回火,贝氏体化和调质
DIN 17022-2-1986 HEAT TREATMENT OF FERROUS MATERIALS; HEAT TREATMENT METHODS;
HARDENING AND TEMPERING OF TOOLS
DIN 17022-2-1986 钢铁材料热处理.热处理方法.工具的淬火和回火
DIN 17022-3-1989 HEAT TREATMENT OF FERROUS MATERIALS; HEAT TREATMENT METHODS;
CASE HARDENING
DIN 17022-3-1989 钢铁材料热处理.热处理方法.表面硬化处理
DIN 17022-4-1998 HEAT TREATMENT OF FERROUS MATERIALS - PART 4: NITRIDING
AND NITROCARBURIZING
DIN 17022-4-1998 钢铁材料热处理.热处理方法.第4部分:渗氮和硝基渗碳
DIN 17022-5-2000 HEAT TREATMENT OF FERROUS MATERIALS - PART 5: SURFACE
HARDENING
DIN 17022-5-2000 钢铁材料热处理.热处理方法.第5部分:表面硬化
DIN 17023-2000 钢铁材料热处理.(WBA)表格.热处理说明
DIN 17052-1-2000 热处理炉.温度均匀性的要求
DIN 1707-100-2001 软钎焊合金.化学成份和形状
DIN 17111-1980 螺钉.螺母及铆钉用的低碳非合金钢；交货技术条件
DIN 17115-1987 STEELS FOR WELDED ROUND LINK CHAINS; TECHNICAL DELIVERY
CONDITIONS
DIN 17115-1987 焊接圆钢链用钢.交货技术条件
DIN 17118-1976 冷轧型钢.交货技术条件
DIN 17122-1978 STEEL CONDUCTOR CONTACT RAILS FOR ELECTRIC TRACTION; TECHNICAL
CONDITIONS OF DELIVERY
DIN 17122-1978 电气铁路用钢制汇流排.交货技术条件
DIN 17145-1980 焊接添加料用的圆线材.交货技术条件
DIN 1715-1-1983 THERMOSTAT METALS; TECHNICAL DELIVERY CONDITIONS
DIN 1715-1-1983 热双金属.交货的技术要求
DIN 1715-2-1983 THERMOSTAT METALS; TESTING THE SPECIFIC THERMAL CURVATURE
DIN 1715-2-1983 热双金属.热曲率比检验
DIN 17204-1990 无缝圆质钢管.交货技术条件
DIN 17205-1992 一般用途的淬火和回火钢铸件.交货技术条件
DIN 17212-1972 FLAME AND INDUCTION HARDENING STEELS; QUALITY SPECIFICATIONS
DIN 17212-1972 火焰淬火和感应淬火钢.质量规范
DIN 172-1992 带头钻套
DIN 1729-1-1982 WROUGHT MAGNESIUM ALLOYS
DIN 1729-1-1982 锻造镁合金
DIN 173-1-1992 插入式钻套.K型和KL型快速更换钻套.L型可换钻套.附件
DIN 1732-1-1988 铝和铝合金用焊接填充金属.成份.应用及供货技术条件
DIN 1732-2-1977 铝和铝合金用焊接填充金属.焊接接头检验
DIN 1732-3-1988 FILLER METALS FOR WELDING ALUMINIUM AND ALUMINIUM ALLOYS;
SAMPLE AND SPECIMEN PREPARATION, MECHANICAL PROPERTIES OF ALL-WELD METAL
DIN 1732-3-1988 铝和铝合金用焊接填充金属检验件.试样.纯焊金属的机械及工艺最低值
DIN 1733-1-1988 铜和铜合金用焊接填加剂成份.应用及交货技术条件
DIN 1736-1-1985 镍与镍合金用焊接添填充金属.成份.应用和交货技术条件
DIN 1736-2-1985 镍与镍合金用焊接添填充金属.试件.试样.机械质量指标
DIN 1737-1-1984 钛和钛钯合金用焊接添填充金属.化学成份.交货技术条件
DIN 1737-2-1988 FILLER METALS FOR WELDING TITANIUM AND TITANIUM-PALLADIUM
ALLOYS; SAMPLE AND SPECIMEN PREPARATION, MECHANICAL PROPERTIES OF ALL-WELD
METAL
DIN 1737-2-1988 钛和钛钯合金用焊接添填充金属.检验样品.试样.纯焊接金属的机械工艺最低值
DIN 17405-1979 SOFT MAGNETIC MATERIALS FOR DIRECT CURRENT RELAYS; TECHNICAL
CONDITIONS OF DELIVERY
DIN 17405-1979 直流继电器用软磁体材料.交货技术条件
DIN 1741-1974 铅压铸合金.压铸件
DIN 1742-1971 TIN ALLOYS FOR PRESSURE; DIE CASTINGS
DIN 1742-1971 锡压铸合金.压铸件
DIN 17440-2001 不锈钢.拉钢丝的交货技术条件
DIN 17456-1999 一般的质量要求不锈钢制无缝圆形钢管.交货技术条件
DIN 17457-1985 特殊要求的奥氏体不锈钢制焊接圆形钢管.交货技术条件
DIN 17458-1985 特殊要求的奥氏体不锈钢制无缝圆形钢管.交货技术条件
DIN 17459-1992 耐高温奥氏体无缝圆钢管.交货技术条件
DIN 17470-1984 HEATING CONDUCTOR ALLOYS; TECHNICAL DELIVERY CONDITIONS
FOR ROUND AND FLAT WIRE
DIN 17470-1984 电热(元件)合金.圆线和扁线的交货技术条件
DIN 17471-1983 RESISTANCE ALLOYS
DIN 17471-1983 电阻合金.性能
DIN 17560-1-2004 FERROSILICON AND SILICON - PART 1: TECHNICAL DELIVERY
CONDITIONS FOR FERROSILICON
DIN 17560-1965 硅铁和硅.交货技术条件
DIN 17560-2-2004 FERROSILICON AND SILICON - PART 2: TECHNICAL DELIVERY
CONDITIONS FOR SILICON
DIN 17561-1965 钼铁.交货技术条件
DIN 17561-2004 FERROMOLYBDENUM - TECHNICAL DELIVERY CONDITIONS
DIN 17562-1965 钨铁.交货技术条件
DIN 17562-2004 FERROTUNGSTEN - TECHNICAL DELIVERY CONDITIONS
DIN 17563-1965 钒铁.交货技术条件
DIN 17563-2004 FERROVANADIUM - TECHNICAL DELIVERY CONDITIONS
DIN 17564-1968 锰铁.锰铁硅和锰.交货技术条件
DIN 17564-2004 FERROMANGANESE, FERROMANGANESE-SILICON AND MANGANESE -
TECHNICAL DELIVERY CONDITIONS
DIN 17565-1968 铬铁.铬铁硅和铬.交货技术条件
DIN 17565-2004 FERRO-CHROMIUM, FERRO-CHROMIUM-SILICON AND CHROMIUM - TECHNICAL
DELIVERY CONDITIONS
DIN 17566-1968 钛铁.交货技术条件
DIN 17566-2004 FERROTITANIUM - TECHNICAL DELIVERY CONDITIONS
DIN 17567-1970 硼铁.交货技术条件
DIN 17567-2004 FERROBORON - TECHNICAL DELIVERY CONDITIONS
DIN 17569-1982 铌铁.交货技术条件
DIN 17569-2004 FERRONIOBIUM - TECHNICAL DELIVERY CONDITIONS
DIN 17580-1968 硅钙.交货技术条件
DIN 17580-2004 CALCIUM-SILICON - TECHNICAL DELIVERY CONDITIONS
DIN 17599-1985 铁合金.粒度
DIN 17611-2000 ANODIZED WROUGHT ALUMINIUM AND ALUMINIUM ALLOYS SEMI-FINISHED
PRODUCTS - TECHNICAL DELIVERY CONDITIONS
DIN 17611-2000 铸铝和铸铝合金的阳极氧化产品.交货技术条件
DIN 17640-1-1986 铅合金.普通用途的合金
DIN 17640-1-2004 LEAD ALLOYS FOR GENERAL PURPOSES
DIN 17666-1983 低合金锻铜合金.成份
DIN 17730-1971 镍浇铸合金和镍铜浇铸合金.铸件
DIN 17740-2002 WROUGHT NICKEL
DIN 17740-2002 锻镍.化学成分
DIN 17741-2002 LOW-ALLOY WROUGHT NICKEL ALLOYS - CHEMICAL COMPOSITION
DIN 17741-2002 低合金的锻镍合金.化学成分
DIN 17742-2002 WROUGHT NICKEL-CHROMIUM ALLOYS - CHEMICAL COMPOSITION
DIN 17742-2002 含铬锻镍合金.化学成分
DIN 17743-2002 WROUGHT NICKEL-COPPER ALLOYS - CHEMICAL COMPOSITION
DIN 17743-2002 含铜锻镍合金.化学成分
DIN 17744-2002 WROUGHT NICKEL-CHROMIUM-MOLYBDENUM ALLOYS - CHEMICAL COMPOSITION
DIN 17744-2002 含钼和铬的锻镍合金.化学成分
DIN 17745-2002 WROUGHT NICKEL-IRON ALLOYS - CHEMICAL COMPOSITION
DIN 17745-2002 镍铁锻制合金.化学成分
DIN 17750-2002 WROUGHT NICKEL AND NICKEL ALLOYS SHEET, PLATE AND STRIP
- REQUIREMENTS AND TESTING
DIN 17750-2002 锻镍和镍合金板材,带材和片材.性能
DIN 17751-2002 WROUGHT NICKEL AND NICKEL ALLOY PIPES AND TUBES - REQUIRMENTS
AND TESTING
DIN 17751-2002 锻镍和镍合金管.性能
DIN 17752-2002 WROUGHT NICKEL AND NICKEL ALLOY ROD AND BARS - REQUIREMENTS
AND TESTING
DIN 17752-2002 锻镍和镍合金条和棒.性能
DIN 17753-2002 WROUGHT NICKEL AND NICKEL ALLOY WIRE - REQUIREMENTS AND
TESTING
DIN 17753-2002 锻镍和镍合金线材.性能
DIN 17850-1990 TITANIUM; CHEMICAL COMPOSITION
DIN 17850-1990 钛.化学成分
DIN 17851-1990 TITANIUM ALLOYS; CHEMICAL COMPOSITION
DIN 17851-1990 钛合金.化学成分
DIN 17860-1990 TITANIUM AND TITANIUM ALLOY PLATE, SHEET AND STRIP; TECHNICAL
DELIVERY CONDITIONS
DIN 17860-1990 钛和钛合金板材.带材.交货技术条件
DIN 17861-1990 SEAMLESS CIRCULAR TITANIUM AND TITANIUM ALLOY TUBES; TECHNICAL
DELIVERY CONDITIONS
DIN 17861-1990 钛和钛合金无缝圆管.交货技术条件
DIN 17862-1993 TITANIUM AND TITANIUM ALLOY BARS - TECHNICAL DELIVERY CONDITIONS
DIN 17862-1993 钛和锻钛合金棒.交货技术条件
DIN 17863-1973 WIRE OF TITANIUM
DIN 17863-1973 钛线
DIN 17864-1993 TITANIUM AND WROUGHT TITANIUM ALLOY FORGINGS (HAMMER FORGINGS
AND DROP FORGINGS) - TECHNICAL DELIVERY CONDITIONS
DIN 17864-1993 钛和锻钛合金的锻件(自由锻造及模锻件).交货技术条件
DIN 17865-1990 TITANIUM AND TITANIUM ALLOY INVESTMENT CASTINGS AND RAMMED
GRAPHITE CASTINGS; TECHNICAL DELIVERY CONDITIONS
DIN 17865-1990 钛和钛合金铸件.精密铸造.压力铸造
DIN 17866-1990 WELDED CIRCULAR TITANIUM AND TITANIUM ALLOY TUBES; TECHNICAL
DELIVERY CONDITIONS
DIN 17866-1990 钛和钛合金焊接管.交货技术条件
DIN 17869-1992 MATERIAL PROPERTIES OF TITANIUM AND TITANIUM ALLOYS; ADDITIONAL
DATA
DIN 17869-1992 钛和钛合金的材料性能.附加说明
DIN 1787-1973 铜.半成品
DIN 179-1992 钻套
下一页